NEC MT1055 Installation Data
With optional mt10rl rear lens
Hide thumbs
Also See for MT1055:
- User manual (60 pages) ,
- Installation data (7 pages) ,
- Installation data (7 pages)
Advertisement
Quick Links
MT1055/1056 Installation Data
with Optional MT10RL Rear Lens
Contents
Product Description, Lens Specs, Notes and Formulas
Projection Distances and Screen Sizes
Rear Projection Installation
Other Applications
Rear Projection Systems
Cabinet Dimensions
Top, Front and Right Side
Bottom, Back and Left Side
Control Codes
Product Description
Type:
3 panel, 1.3" p-Si TFT w/MLA LCD projector
Native Resolution:
1024 x 768
Brightness:
3000 ANSI Lumens (2600 for MT1055)
MT10RL Lens Specifications
Throw Ratio:
1.0 : 1 (approx)
°
Offset Angle:
0
Screen Sizes:
40 – 300" Diagonal
Notes
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
The ceiling must be strong enough to support the LCD projector and the installation must be in accordance with any local
building codes.
•
All calculations are based on 4:3 aspect ratio.
•
Distances are in inches, for millimeters multiply by 25.4.
•
Distances may vary ±5%.
Formulas
Units: Inches (for millimeters multiply final number by 25.4)
Definitions:
H = Horizontal Screen Width (4:3)
V = Vertical Screen Height (4:3)
C = Throw distance
α = Throw Angle
Projection Formulas:
C = 1.0190H – 2.468
°
α = 0
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Dimensions: 11.1"(W) x 5.3"(H) x 16.9"(D) (
Weight:
Manual Focus/Manual Zoom
Focal Length: 27mm
F/#:
Screen Formulas (4:3):
H = Screen Diagonal x 4/5
V = Screen Diagonal x 3/5
Screen Diagonal = H x 5/4
NEC Solutions (America), Inc.
17.4 lbs
(w/lens installed)
2.3
Visual Systems
v 3.0
w/lens installed)
Page 1
Advertisement
Related Manuals for NEC MT1055
Summary of Contents for NEC MT1055
-
Page 1: Product Description
If the figures on the tables do not match the results of formulas, use the figures in the table. The ceiling must be strong enough to support the LCD projector and the installation must be in accordance with any local building codes. - Page 2 MT1055/1056 Installation Data with Optional MT10RL Rear Lens Projection Distance and Screen Size for Desktop (Rear Projection) The following diagram shows the relationship between projector position and the screen. Distances are in inches. For millimeters multiply by 25.4. Desktop Setup...
- Page 3 MT1055/1056 Installation Data with Optional MT10RL Rear Lens Other Applications using MT1055/1056 with optional MT10RL Rear Lens Rear Projection Systems (contact third party manufacturer for these frame/mirror/screen kits) NEC Solutions (America), Inc. Visual Systems v 3.0 Page 3...
- Page 4 MT1055/1056 Installation Data with Optional MT10RL Rear Lens Cabinet Dimensions The following diagrams show the cabinet dimensions for the MT1055/1056 with optional MT10RL lens. Dimensions are in inches. For millimeters multiply by 25.4. £ MT1050 AC IN @ ` NEC Solutions (America), Inc.
- Page 5 MT1055/1056 Installation Data with Optional MT10RL Rear Lens Cabinet Dimensions (continued) The following diagrams show the cabinet dimensions for the MT1055/1056 with optional MT10RL lens. Dimensions are in inches. For millimeters multiply by 25.4. NEC Solutions (America), Inc. 0.787 9.49 2.36...
-
Page 6: Cable Connection
To GND of PC NOTE 1: Pins 2, 3, 5, 6 and 8 are used inside the projector. NOTE 2: For long cable runs it is recommended to set communication speed within projector menus to 9600 bps. Code Data To RxD of PC To TxD of PC NEC Solutions (America), Inc.