Table of Contents
Advertisement
|
|
|
|
2. Loosen the retaining thumbscrew 1 as shown in Figure 16.
1
Figure 16. Installing 10 Gbps iSCSI-FCoE 2 port host interface card
1 Retaining thumbscrew
v
2 Filler handle
v
3 Host interface card
v
4 Catch slot
v
3. From inside the canister, grasp the filler handle 2 and slide the filler plate
toward the center of the canister to disengage the plate from the catch slot.
4. Remove the filler plate.
5. Insert the host interface card 3 into the canister as shown in Figure 16.
6. Align the mounting bracket of the host interface card with the inside of the
host interface card aperture (adjacent to the thumbscrew), ensuring that the
tab at the end of the faceplate is aligned with the catch slot.
7. Align the connecting edge of the host interface card with the slot in the host
interface card connector inside the canister.
8. Apply pressure to the opposite edge of the host interface card to push the
card into the host interface card connector.
4
2
3
Chapter 2. Installing the hardware
23
Hide quick links:
Advertisement
Table of Contents
