Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ABB Smile 11EA AS-i
Summary of Contents for ABB Smile 11EA AS-i
- Page 1 Original instructions Smile 11EA AS-i Emergency stop with safe AS-i input slave Smile 11SA AS-i Safety stop with safe AS-i input slave SAFETY AT WORK ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/lowvoltage...
- Page 2 DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall responsibility of ABB/JOKAB SAFETY for any act exceed the individual price of the product on which liability asserted.
-
Page 3: Table Of Contents
Connections ............................6 Installation and maintenance ........................ 7 Installation precautions ............................. 7 Maintenance ................................7 Operation ..............................8 Smile 11EA AS-i ............................... 8 Smile 11SA AS-i ............................... 8 LED indication ................................8 Technical data ............................9 Dimensions ................................10 EC Declaration of conformity ......................11 2TLC172094M0201, rev. -
Page 4: Introduction
Introduction Scope The purpose of these instructions is to describe the emergency stop Smile 11EA AS-i and the safety stop Smile 11SA AS-i, and to provide the necessary information required for installation and operation. Audience This document is intended for authorized installation personnel. -
Page 5: Overview
General description Smile 11EA AS-i is an emergency stop with a built-in dual channel safe AS-i input slave. Smile 11SA AS-i has a similar dual channel safe AS-i input slave, but is intended for use as a safety stop and therefore has a black pushbutton. -
Page 6: Connections
5 x 0.34 mm2 cable, screen with straight female + male Flat cable connector to M12 M12 connectors. Screen connected to pin 3 (0 VDC) on male connector. Article number: 2TLA020073R0000 Article numbers: 2TLA020056R2000 (1 m) 2TLA020056R2100 (3 m) 2TLC172094M0201, rev. B www.abb.com/lowvoltage 2012-08-03... -
Page 7: Installation And Maintenance
(EN 62061:2005). In case of breakdown or damage to the product, contact the nearest ABB/Jokab Safety Service Office or reseller. Do not try to repair the product yourself since it may accidentally cause permanent damage to the product, impairing the safety of the device which in turn could lead to serious injury to personnel. -
Page 8: Operation
Turn the button clockwise until the button is unlatched. LED indication The LED indication is identical on both models (Smile 11EA AS-i and Smile 11SA AS-i). LED in pushbutton: The LED indication is programmed individually in the PLC-program according to the table below. -
Page 9: Technical Data
Size 52 x 40 x 84 (+12.5 mm M12 contact) (H x W x L) Colour Base: Yellow Emergency stop pushbutton (Smile 11EA AS-i): Red Safety stop pushbutton (Smile 11SA AS-i): Black Actuating force 22 ± 4 N Actuator travel Approx. -
Page 10: Dimensions
Dimensions Smile 11EA/SA AS-i Dimensions NB: All measurements in millimetres. 2TLC172094M0201, rev. B www.abb.com/lowvoltage 2012-08-03... -
Page 11: Ec Declaration Of Conformity
EC Declaration of conformity ABB AB / JOKAB SAFETY Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/lowvoltage 2TLC172094M0201, rev. B www.abb.com/lowvoltage 2012-08-03...