Related Manuals for Asus AAEON UP Squared Pro 7000
Summary of Contents for Asus AAEON UP Squared Pro 7000
- Page 1 UP Squared Pro 7000 Maker Board UPN-ADLN01 User’s Manual 1st Ed Last Updated: February 14, 2023...
- Page 2 Copyright Notice This document is copyrighted, 2023. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer.
- Page 3 Acknowledgement All other products’ name or trademarks are properties of their respective owners. Microsoft®, Windows®, Windows® 10 IoT Enterprise, and Windows® IoT Core ⚫ are registered trademarks of Microsoft Corp. Intel® and Atom® are registered trademarks of Intel Corporation ⚫ Core™...
- Page 4 Packing List Before setting up your product, please make sure the following items have been shipped: Item Quantity UPN-ADLN01 (UP Squared Pro 7000) with heatsink ⚫ If any of these items are missing or damaged, please contact your distributor or sales representative immediately.
- Page 5 About this Document This User’s Manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product. Users may refer to the product page at AAEON.com for the latest version of this document.
- Page 6 Safety Precautions Please read the following safety instructions carefully. It is advised that you keep this manual for future references All cautions and warnings on the device should be noted. Make sure the power source matches the power rating of the device. Position the power cord so that people cannot step on it.
- Page 7 If any of the following situations arises, please the contact our service personnel: Damaged power cord or plug Liquid intrusion to the device iii. Exposure to moisture Device is not working as expected or in a manner as described in this manual The device is dropped or damaged Any obvious signs of damage displayed on the device...
- Page 8 FCC Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
- Page 9 China RoHS Requirements (CN) 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) 印刷电路板 ○ ○ ○ ○ 及其电子组件 外部信号 ○ ○ ○ ○ 连接器及线材 O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出...
- Page 10 China RoHS Requirement (EN) Poisonous or Hazardous Substances or Elements in Products AAEON Main Board/ Daughter Board/ Backplane Poisonous or Hazardous Substances or Elements Hexavalent Polybrominated Polybrominated Component Lead Mercury Cadmium Chromium Biphenyls Diphenyl Ethers (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) PCB &...
-
Page 11: Table Of Contents
Table of Contents Chapter 1 - Product Specifications..................1 Specifications ......................2 Chapter 2 – Hardware Information ..................4 Dimensions ....................... 5 Jumpers and Connectors ..................6 List of Jumpers and Connectors ................8 2.3.1 Power Button (SW1) ..................9 2.3.2 RTC (CN1) ....................... - Page 12 2.3.21 12V DC-In Connector (CN26) ..............23 2.3.22 Fan Connector (J1) ..................24 2.3.23 AT/ATX Mode (JP1)..................24 Chapter 3 – Software Installation ..................25 Linux Setup ......................26 Windows Drivers Installation ................26 Dummy Driver Information ................. 27 3.3.1 Dummy Driver Installation ..............
-
Page 13: Chapter 1 - Product Specifications
Chapter 1 Chapter 1 - Product Specifications... -
Page 14: Specifications
Specifications System Processor Intel® Core™ i3-N305 Intel Atom® x7425E Intel® Processor N97 Intel® Processor N50 (formerly Alder Lake N) Graphics Intel® UHD Graphics for 12 Gen Intel® Processors Memory Up to 16GB LPDDR5 Storage Up to 64GB eMMC HDMI 2.0b x 1 DP 1.2 x 1 DP 1.2 x 1 (via USB Type-C) Audio Jack x 1 (Mic-In + Line-Out) - Page 15 System Ethernet 2.5GbE x 2 (Intel® i226-IT) Security Onboard TPM 2.0 OS Support Windows® 10 IoT Enterprise Windows® IoT Core Ubuntu 22.04 LTS Yocto 4 Power Requirement Power 12V DC-in, 6A Power Supply Type AT/ATX Power Consumption Mechanical Dimension 4" x 4" (101.6mm × 101.6mm) Net Weight 0.44 lb.
-
Page 16: Chapter 2 - Hardware Information
Chapter 2 – Hardware Information Chapter 2... -
Page 17: Dimensions
Dimensions Chapter 2 – Hardware Information... -
Page 18: Jumpers And Connectors
Jumpers and Connectors Top: Chapter 2 – Hardware Information... - Page 19 Bottom: Chapter 2 – Hardware Information...
-
Page 20: List Of Jumpers And Connectors
List of Jumpers and Connectors Please refer to the table below for all of the board’s jumpers and connectors that you can configure for your application Label Function PWR Button M.2 2280 M-Key Slot M.2 3052 B-Key Slot M.2 2230 E-Key Slot Dual LAN Port (RJ-45) HDMI/DP Port CN10... -
Page 21: Power Button (Sw1)
Label Function Fan Connector AT/ATX Mode SIM1 Nano SIM Card Connector 2.3.1 Power Button (SW1) Switch Position Function SW1 1 (Default) SW1 0 Power ON 2.3.2 RTC (CN1) Signal Signal RTC_VCC Chapter 2 – Hardware Information... -
Page 22: 2280 M-Key Slot (Cn2)
2.3.3 M.2 2280 M-Key Slot (CN2) Signal Signal Signal +3.3V +3.3V FULL_CARD_POWER +3.3V +3.3V +3.3V +3.3V PCIE_RXN10 PCIE_RXP10 PCIE_TXN10 PCIE_TXP10 SMB_CLK_1V8 PCIE_RXN9 SMB_DATA_1V8 PCIE_RXP9 PCIE_TXN9 PCIE_TXP9 PLT_RST# PCIE_CLKREQ# PCIE3_CLK_DN PCIE_WAKE# Chapter 2 – Hardware Information... -
Page 23: 3052 B-Key Slot (Cn3)
Signal Signal Signal PCIE3_CLK_DP +3.3V +3.3V +3.3V 2.3.4 M.2 3052 B-Key Slot (CN3) Signal Signal Signal +3.3V FULL_CARD_PWR_ +3.3V OFF#(1.8V) USB2_D+ W_DISABLE#1 USB2_D- Chapter 2 – Hardware Information... - Page 24 Signal Signal Signal USB3_RX3- UIM_RST USB3_RX3+ UIM_CLK UIM_DAT USB3_PX3- UIM_PWR USB3_PX3+ PLT_RST#(3.3V) PLT_RST#(1.8V) +3.3V +3.3V +3.3V Chapter 2 – Hardware Information...
-
Page 25: 2230 E-Key Slot (Cn4)
2.3.5 M.2 2230 E-Key Slot (CN4) Signal Signal Signal +3.3V USB2_D8+ +3.3V USB2_D8- CNV_WR_LANE1_D CNV_RF_RST# CNV_WR_LANE1_DP 12 CNV_WR_LANE0_D CNV_CLKREQ_R CNV_WR_LANE0_DP 18 CNV_WR_CLK_DN CNV_RGI_RSP_R CNV_WR_CLK_DP CNV_RGI_DT CNV_RGI_RSP PCIE11_TXP CNV_BRI_DT PCIE11_TXN PCIE11_RXP PCIE11_RXN PCIE_CLK2P PCIE_CLK2N SUS_CLK WIFI_RST# PCIE_CLKREQ# BT_EN Chapter 2 – Hardware Information... -
Page 26: Dual Lan Port (Rj-45) (Cn6)
Signal Signal Signal PCIE_WAKE# WIFI_EN CNV_WT_LANE1_DN 60 CNV_WT_LANE1_DP CNV_WT_LANE0_DN 66 CNV_WT_LANE0_DP 68 CNV_WT_CLK_DN +3.3V CNV_WT_CLK_DP +3.3V 2.3.6 Dual LAN Port (RJ-45) (CN6) Signal Signal Signal LAN1_MDI0+ LAN1_MDI0- LAN1_MDI1+ LAN1_MDI1- LAN1_MDI2+ LAN1_MDI2- LAN1_MDI3+ LAN1_MDI3- R10A LAN1_ACTLED- LAN1_ACTLED+ LAN1_LINK2500# LAN1_LINK1000# LAN2_MDI0+ LAN2_MDI0- LAN2_MDI1+ LAN2_MDI1- LAN2_MDI2+... -
Page 27: Hdmi/Dp Port (Cn8)
2.3.7 HDMI/DP Port (CN8) Signal Signal Signal DP_TXP0 DP_TXN0 DP_TXP1 DP_TXN1 DP_TXP2 DP_TXN2 DP_CLK+ DP_CLK- CONFIG1 CONFIG2 DP_AUX_P DP_AUX_N DP_HPD 3.3V HDMI_TXP2 HDMI_TXN2 HDMI_TXP1 HDMI_TXN1 HDMI_TXP0 HDMI_TXN0 HDMI_CLK+ HDMI_CLK- DDC_CLK DDC_DATA HDMI_HPD Chapter 2 – Hardware Information... -
Page 28: Sata Connector (Cn10)
2.3.8 SATA Connector (CN10) Signal Signal SATA_TXP0 SATA_TXN0 SATA_RXN0 SATA_RXP0 2.3.9 SATA Power Connector (CN11) Signal Signal Chapter 2 – Hardware Information... -
Page 29: Usb Type-C Port (Cn12)
2.3.10 USB Type-C Port (CN12) Signal Signal Signal SSTXP1 SSTXN1 SBU1 SSRXN2 SSRXP2 SSTXP2 SSTXN2 SBU2 SSRXN1 SSRXP1 Chapter 2 – Hardware Information... -
Page 30: Dual Usb Type-A Port (Cn13)
2.3.11 Dual USB Type-A Port (CN13) Signal Signal Signal USB2_D1- USB2_D1+ USB3_RX1- USB3_RX1+ USB3_TX1- USB3_TX1+ USB2_D2- USB2_D2+ USB3_RX2- USB3_RX2+ USB3_TX2- USB3_TX2+ 2.3.12 USB 2.0/UART 1x10P Wafer (CN14) Signal Signal Signal USB2_D3- USB2_D3+ USB2_D4- USB2_D4+ UART_RX UART_TX Chapter 2 – Hardware Information... -
Page 31: Rs-232/422/485 1X10P Wafer (Com 1) (Cn15)
2.3.13 RS-232/422/485 1x10P Wafer (COM 1) (CN15) Signal Signal DCD / RS422TX- / RS485- RX / RS422TX+ / RS485+ TX / RS422RX+ DTR / RS422RX- 2.3.14 RS-232/422/485 1x10P Wafer (COM 2) (CN16) Signal Signal DCD / RS422TX- / RS485- RX / RS422TX+ / RS485+ TX / RS422RX+ DTR / RS422RX- Chapter 2 –... -
Page 32: 40-Pin Hat (Cn17)
2.3.15 40-Pin HAT (CN17) Signal Signal +3.3V I2C1_DAT / GPIO1 I2C1_CLK / GPIO2 ANALOG_DATA / GPIO3 UART_TX / GPIO16 UART_RX / GPIO17 GPIO4/ UART_RTS I2S_BCLK / GPIO18 GPIO5 GPIO6 GPIO19 +3.3V GPIO20 SPI_MOSI / GPIO7 SPI_MISO / GPIO8 GPIO21 SPI_CLK / GPIO9 SPI_CS0 / GPIO22 GPIO23 I2C0_DAT / GPIO10... -
Page 33: Cpld And Bios Update (Cn18)
2.3.16 CPLD and BIOS Update (CN18) Signal Signal Signal JTAG_TCK JTAG_TDO 1.8V JTAG_TMS SPI_CS SPI_CLK SPI_MISO JTAG_TDI SPI_MOSI SPI_HOLD 2.3.17 DC Power Jack (CN20) Signal Signal DC_IN Chapter 2 – Hardware Information... -
Page 34: Front Panel 1X6P Wafer (Cn21)
2.3.18 Front Panel 1x6P Wafer (CN21) Signal Signal RESET POWER S/W 2.3.19 DC Terminal Block (Optional with Colay) (CN22) Signal Signal DC_IN Chapter 2 – Hardware Information... -
Page 35: Audio Wafer (Cn23)
2.3.20 Audio Wafer (CN23) Signal Signal MIC_LR LOUT_R AUDIO-JD LOUT_L 2.3.21 12V DC-In Connector (CN26) Signal Signal Chapter 2 – Hardware Information... -
Page 36: Fan Connector (J1)
2.3.22 Fan Connector (J1) Signal Signal TACH 2.3.23 AT/ATX Mode (JP1) Signal Signal ATX_MODE PWRBTN AT_MODE ATX Mode (Default) AT Mode Chapter 2 – Hardware Information... -
Page 37: Chapter 3 - Software Installation
Chapter 3 Chapter 3 – Software Installation... -
Page 38: Linux Setup
Linux Setup The UP Squared Pro 7000 supports Linux operating systems (see Chapter 1 for specifications). For instructions on how to install a Linux OS onto your UP Squared Pro 7000, you can find several guides and tutorials in the wiki section of the UP Board website at https://up-board.org for both installing supported distributions as well as... -
Page 39: Dummy Driver Information
Dummy Driver Information 3.3.1 Dummy Driver Installation The following instructions detail how to install the dummy driver for your UP Squared Pro 7000 (UPN-ADLN01). Step 1 – Download UPNullDrv.msi. Step 2 – Click UPNullDrv.msi and follow the steps as per the below images to install Driver. - Page 40 Chapter 3 – Software Installation...
- Page 41 Chapter 3 – Software Installation...
- Page 42 Once you have successfully installed the dummy driver, you will be able to locate it via your system’s Device Manager, as shown below. Chapter 3 – Software Installation...
-
Page 43: Uninstalling The Dummy Driver
3.3.2 Uninstalling the Dummy Driver Click UPNullDrv.msi to uninstall driver, then select Remove UPNullDrv. Chapter 3 – Software Installation... -
Page 44: Appendix A - Up Framework Sdk Installation
Appendix A Appendix A – UP Framework SDK Installation... -
Page 45: Introduction
Introduction This section provides instructions for the installation of the UP Framework SDK. Instructions are provided for Windows 10 and Windows IoT Core. You can download the latest version of UP Framework SDK from the UP community: https://downloads.up-community.org/download/up-sdk-for-windows-10-and-windows-iot/ A.2 Installation for Windows 10 Step 1 Locate the downloaded file UpFrameworkSetup.msi and run the installer. - Page 46 Step 2 Select the installation folder. Default destination path is C:\Program Files(x86)\AAEON\ You may also choose to install the UP Framework SDK for all users or only the current user. Press “Next” to continue installation. Step 3 Press “Next” to confirm the installation. Appendix A –...
- Page 47 Step 4 Press “Close” to exit once setup is complete. Appendix A – UP Framework SDK Installation...
-
Page 48: A.3 Installation For Windows Iot Core
A.3 Installation for Windows IoT Core Before you begin, make sure you have downloaded and installed the latest version of the Windows IoT Core image from the UP community. Installation requires using a connected PC with the UP Framework SDK software downloaded and saved. - Page 49 Step 2 Download the UP Framework SDK to your PC and unzip the files. Open PowerShell as an Administrator. Enter the command RemoteInstallation.ps1 to install the UP Framework SDK on the UP IoT Core device. Enter the IP address of the UP IoT Core device when prompted. Note: you must connect Up IoT Core and PC in the same network.
-
Page 50: Appendix B - Cables And Connectors
Appendix B Appendix B – Cables and Connectors... -
Page 51: Cables And Connectors
Cables and Connectors This table provides detailed information about the cables and connectors used by the UP Squared Pro 7000 (UPN-ADLN01). If you have any questions about the configuration of your board, please contact your AAEON sales representative. Label Mating Cable PN Mating Cable Description COM1 1701100180...