Storing The Error Log In Ascii Format; Prerequisites - Siemens ARCOSKOP Troubleshooting Manual
Hide thumbs
Also See for ARCOSKOP:
- Installation and setting instructions manual (10 pages) ,
- Installation instructions manual (6 pages) ,
- Maintenance instruction (26 pages)
Table of Contents
Advertisement
4 - 4
Storing the error log in ASCII format
•
When storing the error log using the backup function of the service program, it will be
stored as a binary file which cannot be read by a text editor.
•
For easier evaluation of the error log, it can be stored in ASCII format as well.
•
For easier service support from the USC or HSC, please send the error log as an ASCII
file.
NOTE
Prerequisites
•
The service PC is connected and the service program is started.
•
Select the "Diagnostics..." menu.
•
Select the "Error log" menu.
•
Click the "Get from unit" button. Wait until the error log is transferred to the service PC.
•
Click the "Export to file" button.
•
Save the file to your hard drive.
•
For the file name, please enter the current date, the part number and the serial number of
the unit as described in the example.
Example:
The current date is (DD-MM-YY): 29-03-01
The unit part no. is: 4774019
The unit serial no. is: 01234
Enter this file name: 22-03-01_4774019_01234.txt
•
Save the file to the hard drive of your service PC under a path of your choice.
•
Exit the service program.
•
Copy the previous stored file to an emty, formatted floppy disk.
ARCOSKOP
System Manual
The parameter disk must be in drive A before starting the service
program and during service work. Otherwise, the text "no error
text available" will display behind the error codes instead of the
actual error messages.
SPR2-250.840.01
Rev. 01
Operating software
Seite 4 von 4
09.05
CS PS 24
4
4
Siemens AG
Medical Solutions
Advertisement
Table of Contents
