Installing The Filter(S) - Electrolux Icon E40PV100FS Installation Manual
Hide thumbs
Also See for Icon E40PV100FS:
- Use & care manual installation instructions (24 pages) ,
- Design manual (164 pages)
Table of Contents
Advertisement
INSTALLING THE FILTER(S)
1 To remove the grease filter, grip the latch and pull it down. This will disengage the
filters from the hood. Tilt the filter downward and remove.
2 To install the grease filter, align rear filter tabs with slots in the hood. Pull latch
tab down, push filter up into position and release the tab. Make sure the filter is
securely engaged after installation.
NOTE
Prior to use, remove protective film from the filter frame.
GREASE
FILTERS
Figure 17
Advertisement
Table of Contents
