Recording Mode Setting; Loading/Unloading A Cassette - JVC GR-AX760 Instructions Manual
Compact vhs camcorder
Hide thumbs
Also See for GR-AX760:
- Instructions manual (56 pages) ,
- Instructions manual (56 pages) ,
- Instructions manual (57 pages)
Table of Contents
Advertisement
Downloaded from:
https://www.usersmanualguide.com/
SP/LP
SP
LP
Turn to take up
slack.
Erase Protection
Gear
Recording Mode Setting
1
Pressing SP/LP alternates the setting between SP
(standard play-provides higher picture and sound
quality, better for dubbing) and LP (Long Play-more
economical, recording at 1/2 the speed of SP).
NOTE:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
Loading/Unloading A Cassette
OPEN CASSETTE HOLDER
1
Slide EJECT until the holder opens. Do not use force
to open.
INSERT/REMOVE CASSETTE
2
Make sure the label is facing outward.
CLOSE CASSETTE HOLDER
SP
3
Press PUSH and make sure the holder is closed and
locked.
NOTES:
● A cassette holder can't be opened unless a power
supply is attached.
● Make sure that the tape is not slack when loading the
cassette. If there is any slack, turn the gear on the
cassette in the direction of the arrow to take up the
slack.
● Make sure the Erase Protection tab is present. If not,
cover the hole with adhesive tape. (Some cassettes
have sliding tabs – in this case, check the tab's
position.)
9
EN
Advertisement
Table of Contents
