Safety en Futher information and explanations are available online: Do not use the appliance: Table of contents ¡ With an external timer or a separate remote control. This does not apply if operation Safety .............. 3 with appliances included in EN 50615 is Preventing material damage .......
en Preventing material damage sible electrical shock. To do this, switch off Food may catch fire. the appliance via the fuse in the fuse box ▶ The cooking process must be monitored. A rather than at the main switch. short process must be monitored continu- ▶...
Environmental protection and saving energy en Damage Cause Measure Damage Cause Measure Discol- Pan abrasion, Lift pots and pans to Blisters Sugar or food Remove boiled-over food ouration e.g. aluminium move on the hob. with a high immediately with a glass sugar content scraper.
en Familiarising yourself with your appliance 4 Familiarising yourself with your appliance The instruction manual is the same for various different hobs. You can find the hob dimensions in the overview of models. → Page 2 4.1 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operat- ing status.
Page 7
Basic operation en 4.5 Residual heat indicator Display Meaning The hotplate is so hot that you can The hob has a two-stage residual heat indicator for keep small dishes warm or melt cook- each hotplate. Do not touch the hotplate while the re- ing chocolate.
Page 8
en Childproof lock Melting Goulash 2.-3. 50–60 Food Ongoing Ongoing Frying with little oil cooking cooking Fry food without a lid. setting time in minutes Escalope, plain or breaded 6–7 6–10 Chocolate, cooking chocolate 1-1. Escalope, frozen 6–7 8–12 Butter, honey, gelatine 1–2 Chops, plain or breaded 6–7...
Automatic switch-off en 7 Automatic switch-off If you do not change the settings of a hotplate for a 7.1 Continuing cooking after automatic long time, automatic switch-off will be activated. switch-off When the hotplate switches off depends on the heat Touch any touch field. setting selected (1 to 10 hours).
Page 10
en Cleaning and servicing 9 Cleaning and servicing To keep your appliance working efficiently for a long 9.2 Cleaning the glass ceramic time, it is important to clean and maintain it carefully. Clean the hob after every use to stop cooking residues from getting burnt on.
Page 11
Disposal en Fault Cause and troubleshooting Several hotplates have been used over a prolonged period at high power settings. The hot- plate has been switched off to protect the electronics. Wait a while. Touch any touch field. a When the message no longer appears, the electronics have cooled down sufficiently. You can continue to cook.
Page 12
en Customer Service 12 Customer Service If you have any queries on use, are unable to rectify faults on the appliance yourself or if your appliance needs to be repaired, contact Customer Service. Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area.
Page 16
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.