Installing The I/O Board - Dell Inspiron 15 5518 Service Manual
Hide thumbs
Also See for Inspiron 15 5518:
- Setup and specifications (23 pages) ,
- Quick start manual (14 pages)
Table of Contents
Advertisement
Steps
1. Remove the two (M2.5x4) screws that secure the left hinge.
2. Open the display hinge at an angle of 90 degrees.
3. Open the latch, and disconnect the power button with optional fingerprint reader cable from the I/O board.
4. Disconnect the coin-cell battery cable from the I/O board.
5. Peel the tape that secures the I/O-board cable to the I/O board.
6. Open the latch and disconnect the I/O-board cable from the I/O board.
7. Remove the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly.
8. Lift the I/O board off the palm-rest and keyboard assembly.
Installing the I/O board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the I/O board and provides a visual representation of the installation procedure.
40
Removing and installing components
Advertisement
Table of Contents
