Page 1
MULTI SURROUND ASPECT R-TUNE MENU TV/AV D.PNR CHANGE CH SEARCH STILL Wide LCD TV TC-26LX1H Model No. TC-32LX1H The illustration shown is an image. Please read these instructions before operating your set and retain them for future reference. English TQBC0895...
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD TV. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference.
• DO NOT use if the power • This type of LCD panel damage, is not an operating cord or power plug is defect, and as such is not covered by the Panasonic damaged, or if the plug warranty. does not fit tightly into the socket.
Page 4
Warnings and Precautions • The On / Off switch on this model does not fully • DO NOT stand, or place disconnect the TV from the mains supply. heavy objects on the unit. Remove the mains plug Particular care should be from the wall socket taken by families with before connecting or...
Accessories Check that you have the accessories and items shown Operating Instruction book Remote Control Transmitter Batteries for the Remote (N2QAJB000104) Control Transmitter (2 × R6 (AA) size) MULTI SURROUND ASPECT R-TUNE MENU TV/AV D.PNR CHANGE CH SEARCH STILL Fitting remote control batteries “R6 (AA)”...
Cable cover removal and fitting Removal 1. Push down hooks and pull the cover slightly towards yourself to disengage the claws (at 4 points). 2. Slowly pull out in the downward direction. Fitting 1. Insert the claws (at 4 points) at the bottom end. 2.
Antenna connection For proper reception of VHF / UHF channels, an external antenna is required. For best reception, an outdoor antenna is recommended. VHF Aerial UHF Aerial Mixer ANT OUTPUT ANT INPUT 75 Ω Coaxial cable Notes: Coaxial Aerial plug •...
Audio / video connections It is possible to connect a variety of additional equipment to this TV. The following pages detail how to connect external equipment to the front and rear of the TV. Once your equipment is connected, use the following procedure to view the input: TV/AV Press the TV/AV button.
Audio / video connections S-VIDEO VIDEO MONO MONO MONO AUDIO MONITOR COMPONENT AV4 IN How to connect the Monitor Output Terminals to other Equipment Example of output signal source MONITOR VIDEO S-VIDEO VIDEO MONO MONO MONO AUDIO Amplifier to speaker system AUDIO MONITOR MONITOR...
Audio / video connections How to connect the DVD Input Terminals Example of input signal source Connect the VIDEO or COMPONENT VIDEO terminal. COMPONENT VIDEO OUT DVD PLAYER Y, P S-VIDEO Digital TV-SET-TOP-BOX VIDEO (DTV-STB) VIDEO MONO MONO MONO MONO AUDIO AUDIO MONITOR...
Basic controls: front panel and remote control F (Function select) Displays the On Screen Display functions, use repeatedly to select from the Increases or decreases the programme available functions - VOLUME, BACKLIGHT, CONTRAST, BRIGHTNESS, COLOUR, SHARPNESS, NTSC-TINT (TINT), BASS, TREBLE, BALANCE position by one.
Using the On Screen Displays Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote control as shown below to access and adjust features as desired. The MENU button is used to open the main menus and MENU also to return to the previous menu.
Tuning TUNING MENU During TV mode MENU Press the MENU button. Move to choose SETUP. Access SETUP. MAIN MENU Move to choose TUNING MENU. P I C T U R E S O U N D Access TUNING MENU. S E T U P Move to choose menu option.
Tuning Channel Selection Select the most easily viewed channel selection method. 10ch 12ch 14ch 16ch 18ch 20ch POSITION Example Programme Channel Received When the CH SELECT is on POSITION, and AUTO Number Display Channel TUNE is performed, the unit memorises the channels tuned in order from Programme No.1.
Tuning AUTO TUNE AUTO TUNE automatically retunes your TV. This feature is useful if, e.g., you move house and wish to retune your TV to receive the local stations. MENU Press the MENU button. Move to choose SETUP. Access SETUP. Move to choose TUNING MENU.
Tuning MANUAL TUNE It is possible to retune individual programme positions: MENU Press the MENU button. Move to choose SETUP. Access SETUP. Move to choose TUNING MENU. Access TUNING MENU. Move to choose MANUAL TUNE. Access MANUAL TUNE. Select the programme position to be tuned. CH 12 Press repeatedly until required station is found.
PICTURE MENU Press the MENU button. Move to choose PICTURE. Access PICTURE. Move to choose menu option. Adjust chosen option or access chosen menu. TV/AV Press the TV/AV button at any time to go back to watching TV. MENU MENU mode will be memorized for each TV, AV1, AV2, MAIN MENU AV3 and AV4 mode.
SOUND MENU Press the MENU button. Move to choose SOUND. Access SOUND. Move to choose menu option. Adjust chosen option or access chosen menu. TV/AV Press the TV/AV button at any time to go back to watching TV. Pressing the OK button after having adjusted some features will store the setting as the default (replacing the factory setting).
SETUP MENU Press the MENU button. Move to choose SETUP. Access SETUP. Move to choose menu option. Adjust chosen option or access chosen menu. TV/AV Press the TV/AV button at any time to go back to watching TV. OFF TIMER Switches the TV off within a preset time which you MAIN MENU can choose from between 0 to 90 minutes in 15 minute...
Aspect Controls The Widescreen TV will allow you to enjoy viewing the picture at its optimum size and aspect, including widescreen cinema format pictures. ASPECT Press the ASPECT button repeatedly to move through the aspect options: AUTO 16 : 9 JUST 4 : 3 ZOOM3...
Still STILL Press the STILL button to freeze the picture. Press again to return to watching the current programme. Channel search CH SEARCH Press the CH SEARCH button to show freeze-frames of the programmes being broadcast on all of the stored channels.
Multi window Press the MULTI PIP button. Whilst the on screen selector keys are displayed, use MULTI the Red or Green buttons to move between the PIP (picture in picture) feature, POP (picture out of picture) and PAP (picture and picture) feature. Press the Blue or CHANGE button to swap the contents of the two windows.
Photo View mode Still image data (JPEG) made with a digital camera or digital video camera can be played back using an SD Card / PC Card. Displayable Image Formats: Baseline JPEG 64 × 64 – 8,192 × 8,192 pixels (sub-sampling 4:2:2 or 4:2:0) Displayable number of folders: Max 100 Notes: •...
Page 25
Photo View mode Compatible Card SD Card SD Card slot PC Card slot Insertion Removal SD Card Compact Flash* Multi Media Card Smart Media* miniSD Card Memory Stick* Insert it to the depth. xD Picture Card* Push the center Flash ATA Card* of the card.
Page 26
Photo View mode PICTURE During Photo View mode MENU Press the MENU button. Move to choose PICTURE. Access PICTURE. Move to choose menu option. Adjust chosen option or access chosen menu. MAIN MENU TV/AV Press the TV/AV button at any time to exit PICTURE. PICTURE BACKLIGHT, CONTRAST, BRIGHTNESS, COLOUR, SHARPNESS CARD SETUP MENU...
Page 27
Photo View mode When you press the SD button, thumbnail screen is displayed automatically. After that you can choose your desirable view mode between the following three modes. Multi mode 12 images are displayed. 0001 / 0013 PHOTO VIEW MODE Press to select desired image.
VCR / DVD operation The Remote Control is capable of operating some functions of selected VCR and DVD (Digital Versatile Disc) equipment. Some VCR and DVD equipment have different functions, so to ensure compatibility please refer to the equipment’s instruction book or consult your dealer for details. Button Function Standby...
Remote control setting Remote Control Operation is possible for the Panasonic VCR’s and DVD’s equipment. After completion of setting, execute the various operations after pressing the VCR / DVD selection switch. Switch to select VCR or DVD. While pressing the VCR / DVD Power button, press the manufacturer code (enter the two digit code), and press the VCR / DVD Stop button.
If there is a problem with your LCD TV please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV).
Specifications TC-26LX1H TC-32LX1H Power Source AC 100-127 / 200-240 V, 50 / 60 Hz Power Consumption Average use Average use 100-127 V : 130 W 100-127 V : 165 W 200-240 V : 129 W 200-240 V : 163 W Standby condition : 1.8 W...
Page 32
Warranty Service purposes. Model Number Serial Number Matsushita Electric Industrial Co., Ltd. Web Site : http://www.panasonic.co.jp/global/ 2004 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Printed in Japan MBS0504S0...