Table of Contents
Advertisement
Precautions
On safety
Should any solid object or liquid fall into the cabinet, unplug the receiver
and have it checked by qualified personnel before operating it any
further.
On power sources
• Before operating the receiver, check that the operating voltage is
identical with your local power supply.
The operating voltage is indicated on the nameplate on the back of the
receiver.
• If you are not going to use the receiver for a long time, be sure to
disconnect the receiver from the wall outlet. To disconnect the AC power
cord (mains lead), grasp the plug itself; never pull the cord.
• One blade of the plug is wider than the other for the purpose of safety
and will fit into the wall outlet only one way. If you are unable to insert
the plug fully into the outlet, contact your dealer.
• AC power cord (mains lead) must be changed only at a qualified service
shop.
• To reduce the risk of electric shock, the speaker cable should be
connected to the apparatus and the speakers in accordance with the
following instructions.
1) Disconnect the AC power cord from the MAINS.
2) Strip 10 to 15 mm (13/32 to 19/32 in) of the wire insulation of the
speaker cable.
3) Connect the speaker cable to the apparatus and the speakers
carefully so as not to touch the core of speaker cable by hand. Also
disconnect the AC power cord from the MAINS before disconnecting
the speaker cable from the apparatus and the speakers.
On heat buildup
Although the receiver heats up during operation, this is not a
malfunction. If you continuously use this receiver at a large volume, the
cabinet temperature of the top, side and bottom rises considerably*. To
avoid burning yourself, do not touch the cabinet.
*
The top of the cabinet may become too hot to touch.
6
EN
On placement
• Do not install the appliance in a confined space, such as a bookcase.
• Sufficient space around the receiver is needed to release heat. When
placing the receiver in a rack, leave more than 44.45 mm (1.75 in) space
above the receiver, and more than 44.45 mm (1.75 in) space along the
sides of the receiver. The rack behind the receiver should be open. If you
place the receiver with its back against the wall, leave more than 88.9
mm (3.5 in) space between the receiver and the wall.
• Make sure to use a "WS-RE2" dedicated rack mount kit for this receiver
when mounting the receiver on a rack mount.
• Place the receiver in a location with adequate ventilation to prevent
heat buildup and prolong the life of the receiver.
• Do not place the receiver near heat sources, or in a place subject to
direct sunlight, excessive dust, or mechanical shock.
• Do not place anything on top of the cabinet that might block the
ventilation holes and cause malfunctions.
On operation
Before connecting other device, be sure to turn off and unplug the
receiver.
On cleaning
Clean the cabinet, panel, and controls with soft dry cloth. Do not use any
type of abrasive pad, scouring powder, or solvent, such as alcohol or
benzine.
On updating
This receiver allows you to update the software automatically when
connected to the Internet via a wired or wireless network.
You can add new features and use the receiver with more convenience
and safety by updating the receiver.
If you do not want to update automatically, set [Auto Update] to [Off].
However, the receiver may update the software automatically for reasons
such as safety, even if this function is disabled. You can also update the
software using the settings menu when this function is disabled. For
details, refer to Help Guide.
You may not use the receiver while the software is being updated.
Hide quick links:
Advertisement
Chapters
Table of Contents
