hit counter script
Pioneer DEH-8300SD/XNEW5 Service Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Car Receiver
  5. DEH-8300SD/XNEW5
  6. Service manual

Pioneer DEH-8300SD/XNEW5 Service Manual

Cd rds receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

CD RDS RECEIVER
DEH-8300SD
DEH-P8300UB
DEH-8350SD
DEH-8350SD
This service manual should be used together with the following manual(s):
Model No.
Order No.
CX-3269
CRT4488
For details, refer to "Important Check Points for Good Servicing".
PIONEER CORPORATION
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2010
Mech. Module
S11STD-DOUT
CD Mech. Module : Circuit Descriptions, Mech. Descriptions, Disassembly
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
DEH-8300SD/XNEW5
/XNUC
/XNES
/XNES1
Remarks
ORDER NO.
CRT4662
/XNEW5
K-ZZZ NOV. 2010 Printed in Japan

Advertisement

Table of Contents
loading

Related Manuals for Pioneer DEH-8300SD/XNEW5

Summary of Contents for Pioneer DEH-8300SD/XNEW5

  • Page 1 PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2010 K-ZZZ NOV.

  • Page 2: Safety Information

    The AEL (accessible emission level )of the laser power output is less than CLASS 1 but the laser component is capable of emitting radiation exceeding the limit for CLASS 1. A specially instructed person should do servicing operation of the apparatus. DEH-8300SD/XNEW5...
  • Page 3 CAUTION Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type recommended by the manufacture. Discord used batteries according to the manufacture's instructions. DEH-8300SD/XNEW5...
  • Page 4 To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be installed before shipment. Please be sure to follow this method especially if it is specified in this manual. DEH-8300SD/XNEW5...

  • Page 5: Table Of Contents

    10.2 TUNER AMP ASSY (2/2) (GUIDE PAGE) ....................54 10.3 KEYBOARD UNIT ..........................60 10.4 CD CORE UNIT (S11STD-DOUT)......................62 10.5 WAVEFORMS............................64 11. PCB CONNECTION DIAGRAM ........................66 11.1 TUNER AMP ASSY ..........................66 11.2 KEYBOARD UNIT...........................70 11.3 CD CORE UNIT (S11STD-DOUT) ......................72 12. ELECTRICAL PARTS LIST...........................74 DEH-8300SD/XNEW5...

  • Page 6: Service Precautions

    If the lead is bent, please correct the angle between the lead and the light receiving part to be 90 degrees or replace the infrared detecting unit for remote control (GP1UXC14RK). DEH-8300SD/XNEW5...

  • Page 7: Notes On Soldering

    Compared with eutectic solders, lead-free solders have higher bond strengths but slower wetting times and higher melting temperatures (hard to melt/easy to harden). The following lead-free solders are available as service parts: Parts numbers of lead-free solder: GYP1006 1.0 in dia. GYP1007 0.6 in dia. GYP1008 0.3 in dia. DEH-8300SD/XNEW5...

  • Page 8: Specifications

    2. SPECIFICATIONS 2.1 SPECIFICATIONS DEH-8300SD/XNEW5 General WAV signal format ....Linear PCM & MS ADPCM Power source......14.4 V DC (10.8 V to 15.1 V (Non-compressed) allowable) Grounding system....Negative type Maximum current consumption USB standard specification ............10.0 A ...........USB 2.0 full speed Backup current ....
  • Page 9 Specifications and the design are subject to Usable discs ....C ompact disc Signal-to-noise ratio ..94 dB (1 kHz) (IHF-A network) modifications without notice. Number of channels ..2 (stereo) MP3 decoding format ..MPEG-1 & 2 Audio Layer 3 DEH-8300SD/XNEW5...
  • Page 10 Usable sensitivity ..... 25 µV (S/N: 20 dB) Signal-to-noise ratio ..62 dB (IEC-A network) Infrared remote control Wavelength ...... 940 nm ±50 nm Output ......typ; 12 mw/sr per Infrared LED Note Specifications and the design are subject to modifications without notice. DEH-8300SD/XNEW5...

  • Page 11: Disc/Content Format

    CAUTION Press to display the disc title, Use an optional Pioneer USB cable (CD-U50E) to track title, folder, or file list de- LIST/ pending on the source. connect the USB audio player/USB memory as...
  • Page 12 AUDIO tion. Press to select different dis- CAUTION plays. Use an optional Pioneer USB cable (CD-U50E) DISP/SCRL Press and hold to scroll to connect the USB audio player/USB memory through the text information. as any device connected directly to the unit will...
  • Page 13 CAUTION Press to display the disc title, Use an optional Pioneer USB cable (CD-U50E) track title, folder, or file list de- to connect the USB audio player/USB memory LIST/ENTER pending on the source.

  • Page 14: Connection Diagram

    2.4 CONNECTION DIAGRAM DEH-8300SD/XNEW5 DEH-8300SD/XNEW5...
  • Page 15 Not used. 8 Subwoofer output l Subwoofer (4 ) × 2 9 IP-BUS cable (sold separately) (DEH-P8300UB/XNUC) a Pioneer IP-BUS accessories (sold separately) Notes (DEH-P8300UB/XNUC) With a 2 speaker system, do not connect any- Power cord thing to the speaker leads that are not con- Perform these connections when not connect- nected to speakers.

  • Page 16: Basic Items For Service

    See the table below for the items to be checked regarding audio: Item to be checked regarding audio Distortion Noise Volume too low Volume too high Volume fluctuating Sound interrupted 3.2 PCB LOCATIONS A:DEH-8300SD/XNEW5 B:DEH-P8300UB/XNUC C:DEH-8350SD/XNES D:DEH-8350SD/XNES1 Unit Number : QWM3185(A) : QWM3187(B) : QWM3186(C,D) Unit Name...

  • Page 17: Jigs List

    CD Mechanism Module 3.4 CLEANING Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools: Portions to be cleaned Cleaning tools CD pickup lenses Cleaning liquid : GEM1004 Cleaning paper : GED-008 DEH-8300SD/XNEW5...

  • Page 18: Block Diagram

    4. BLOCK DIAGRAM 4.1 BLOCK DIAGRAM TUNER AMP ASSY :DEH-P8300UB/XNUC JA101 :DEH-8300SD/XNEW5 BUSL+ :DEH-8350SD/XNES BUSL- :DEH-8350SD/XNES1 IP-BUS DRIVER BUS+ ROUT IP-BUS BUS+ IC101 BUS- DIN1 HA12241FP BUS- STBY IPPW ASENB0 Q101 ASENB RESET IC651 RESET VDD3.3V Q102 S-80827CNMC-B8M JA401 SYSTEM...
  • Page 19 RESET RESET CONT CN781 SD DATA (DATA0 - DATA3, CLK, CMD) MEDIA uCOM iPod CP (2/2) IC501 SD3.3V REG. IC491 R5S7262ZD144FPU Q781 341S2162 MED3.3V FLASH MEMORY I2C_SDA IC451 I2C_SCL SST25V040BIS Q782 Q783 nRESET Q491 MED3.3V MODE1 SD_CD SD_WP MED3.3V DEH-8300SD/XNEW5...
  • Page 20 COMPUTER IC1871 IC1872 PEG738A8 PD8194A9 ROTARY COMMANDER S1821 CN1921 OSCIN ROT0 Phase_B O_CIN JOYST ROT1 Phase_A D7(SDIN) O_SID D6(SCLK) O_SCLK O_DC RSTB KYDT O_RST KYDT OEL MODULE DPDT DPDT O_CSB SWVDD OEL+B CN1811 USBDP USBDP USBDM USBDM VBUS VBUS DEH-8300SD/XNEW5...

  • Page 21: Diagnosis

    In case of the above signal, the communication Source keys with Grille microcomputer may fail. operative If the time interval is not 500 msec, the oscillator may be defective. Source ON SYSPW <- H Pin 36 Completes power-on operation. (After that, proceed to each source operation) DEH-8300SD/XNEW5...

  • Page 22: Error Code List

    • How to restore from each error is shown below. classification, shown below. 0x, 1x and 3x: ACC-OFF then ON, CD-OFF then ON, 0x: Servo-related errors Disc ejection 1x: Servo-related errors 5X: ACC-OFF then ON, Disc ejection, Disc reloading 3x: Servo-related errors 5x: Mechanism-related errors DEH-8300SD/XNEW5...
  • Page 23 Once the iPod’s main menu is displayed, recon- nect the iPod and reset it. STOP There are no Select a list that songs in the cur- contains songs. rent list. Not found No related songs Transfer songs to the iPod. DEH-8300SD/XNEW5...

  • Page 24: Connector Function Description

    ANTENNA WIRED REMOTE SUBWOOFER CONTROL OUTPUT IP-BUS INPUT 15 13 11 9 7 16 14 12 10 8 1. BUS+ 2. GND TEL (DEH-8300SD/XNEW5) 3. GND 4. NC 5. BUS- 6. GND 7. BUSL1 BREM 8. ASENB1 B.UP 9. BUSR1 10.

  • Page 25: Service Mode

    LIST key To all turning off LIST key [*1]Key Screen ROM connection confirmation TAG/S.Rtrv LIST key ES,ES1 S.Rtrv Media microcomputer information display LIST key Manufacture_ID information display (UC,EW) LIST key Display Test Mode selection screen (UC) (EW5, ES, ES1) DEH-8300SD/XNEW5...
  • Page 26 If a number apparently strange is displayed as the EEPROM version: There may be a problem with the communication. If a version display is being made but the number of CH used is not displayed properly: The connection with the EEPROM may be defective. DEH-8300SD/XNEW5...
  • Page 27 There may be a problem with the communication, or the display microcomputer may have an error. If a number apparently strange is displayed as the media version: There may be a problem with the communication. Manufacture ID information display (UC, EW) DEH-8300SD/XNEW5...

  • Page 28: Cd Test Mode

    When the power is turned on/off the gain of the RFAMP is reset to 0 dB. At the same time all the self-adjusting values shall return to the default setting. Do not do Tracking Servo Close before doing Focus Servo Close. (Because the overcurrent flows) DEH-8300SD/XNEW5...

  • Page 29: Disassembly

    CD Mechanism Module. Panel Assy Fig.1 - Removing the Tuner Amp Assy (Fig.2) Remove the two screws. Remove the two screws. Straighten the tabs at four locations indicated and then remove the Tuner Amp Assy. Tuner Amp Assy Fig.2 DEH-8300SD/XNEW5...
  • Page 30 Mechanism Unit from the table. Keeping the Mechanism Unit lifted by holding these tabs with your fingers may result in deformation. 3. Be careful NOT to hold the front part of the Upper Frame or the CRG Mechanism and NOT to insert foreign objects into these mechanisms. Doing so may result in deformation. Proper handling Improper handling DEH-8300SD/XNEW5...
  • Page 31 Note: Be aware that the colors of the lead wires do not match the indications on the Core Board Pattern (green wire to O and Fig. 1 white wire to P). Disc Detection Arm Fig. 2 DEH-8300SD/XNEW5...
  • Page 32 Clamp State (Driven by the Motor).” 2. Move the PU unit toward the outer track, by applying 1.5-V power to the CRG motor. Note: After moving the PU toward the outer track and taking the necessary measures, be sure to solder the lead wires. DEH-8300SD/XNEW5...
  • Page 33 After reassembling the PU Rack, insert the feed screw from side c in Fig. 5 (insertion depth: Approx. 18 mm for the part indicated in the photo). PU Rack PU Rack fixing screw Fig. 4 Fig. 1 18 mm Fig. 5 Fig. 2 Actuator block Fig. 3 Fig. 6 DEH-8300SD/XNEW5...
  • Page 34 1. Be sure to hold the PU at the positions shown in “Proper handling.” NEVER hold it as shown in “Improper handling.” Proper handling Improper handling Do not touch the object lens and ACT. Do not touch the VR. Do not touch the Hologram. Do not pull the FPC. DEH-8300SD/XNEW5...

  • Page 35: Each Setting And Adjustment

    The time taken to turn to the deteriorated mode is at a minimum around 20 seconds while the time to return to the normal mode is maximum 40 seconds approximately. Make sure to check the sound quality in the normal operation mode. DEH-8300SD/XNEW5...

  • Page 36: Checking The Grating After Changing The Pickup Unit

    Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the average angle. Hint Reloading the disc changes the clamp position and may decrease the "wobble". DEH-8300SD/XNEW5...
  • Page 37 Grating waveform Ech -> Xch 20 mV/div, AC Fch -> Ych 20 mV/div, AC 0 degrees 30 degrees 45 degrees 60 degrees 75 degrees 90 degrees DEH-8300SD/XNEW5...

  • Page 38: Pcl Output Confirmation

    The frequency of the clock signal is 625.0 kHz that is one 32th of the fundamental frequency. The clock signal should be 625.0 kHz(- 10 Hz, + 15 Hz). If the clock signal is out of the range, the X'tal (X601) should be replaced with new one. DEH-8300SD/XNEW5...
  • Page 39 DEH-8300SD/XNEW5...

  • Page 40: Exploded Views And Parts List

    9. EXPLODED VIEWS AND PARTS LIST 9.1 PACKING ES, ES1 EW5, ES, ES1 UC, ES, ES1 DEH-8300SD/XNEW5...
  • Page 41 * QRB3090 Finnish * QRB3091 Danish * QRB3092 Portuguese * QRB3093 Greek * QRB3094 Turkish All operation manuals are supplied in PDF files by the CD-ROM. Regarding the availability of paper manual, contact Pioneer Service representative in your region. DEH-8300SD/XNEW5...

  • Page 42: Exterior (1)

    9.2 EXTERIOR (1) UC, ES, ES1 UC, ES, ES1 DEH-8300SD/XNEW5...
  • Page 43 QNV3032 Holder CND5436 Panel QNS3169 Double Side Tape CNM8673 Case YNB5063 Holder CNW1758 (2) CONTRAST TABLE DEH-8300SD/XNEW5, DEH-P8300UB/XNUC, DEH-8350SD/XNES and DEH-8350SD/XNES1 are constructed the same except for the following: DEH-8300SD DEH-P8300UB DEH-8350SD DEH-8350SD Mark Description /XNEW5 /XNUC /XNES /XNES1 Cord Assy...

  • Page 44: Exterior (2)

    9.3 EXTERIOR (2) DEH-8300SD/XNEW5...
  • Page 45 See Contrast table (2) Screw BPZ26P080FTC Cover YNN5030 Screw BSZ26P060FTC Holder YND5048 Screw See Contrast table (2) (2) CONTRAST TABLE DEH-8300SD/XNEW5, DEH-P8300UB/XNUC, DEH-8350SD/XNES and DEH-8350SD/XNES1 are constructed the same except for the following: DEH-8300SD DEH-P8300UB DEH-8350SD DEH-8350SD Mark Description /XNEW5 /XNUC /XNES /XNES1...

  • Page 46: Cd Mechanism Module

    ( C ) ( A ) ( A ) ( A ) ( C ) ( C ) ( C ) ( A ) : GEM1045 ( B ) : GEM1038 ( C ) : GEM1024 ( D ) : GEM1043 DEH-8300SD/XNEW5...
  • Page 47 Guide CNW1171 Roller CNW1172 CNW1173 CNW1174 Roller CNW1175 Lever CNW1176 CNW1177 CNW1178 Gear CNW1180 Gear CNW1181 Gear CNW1182 Gear CNW1183 Rack CNW1184 Gear CNW1185 Gear CNW1186 Gear CNW1187 Gear CNW1188 Clamper CNW1190 CNW1192 Holder CNW1193 Holder CNW1194 Damper CNW1197 DEH-8300SD/XNEW5...

  • Page 48: Schematic Diagram

    B only B only B,C,D FM/AM(30%): -20.00 dBs (A,B) FM/AM(30%): -24.00 dBs (C,D) only A,C,D only A,C,D ANTENNA SYS+B 8.4V 5.2V SWVDD 3.3V USB5V 5.0V ILM+B 10.39V(DIM OFF) 7.59V(DIM ON) MECHA VD 7.4V 9.4V REG 9.4V OEL+B 15.5V CN1801 DEH-8300SD/XNEW5...
  • Page 49 TUNER AMP ASSY A:DEH-8300SD/XNEW5 FM/AM(30%): +2.00 dBs (A,B) FM/AM(30%): -2.00 dBs (C,D) B:DEH-P8300UB/XNUC CD/USB/SD:+14.04 dBs AUX:+14.20 dBs FM/AM(30%): +1.98 dBs (A,B) C:DEH-8350SD/XNES FM/AM(30%): -1.98 dBs (C,D) CD/USB/SD:+13.91 dBs D:DEH-8350SD/XNES1 AUX:+14.07 dBs C641 A,C,D 1u/10V 2.2 uF PEG735A8 PEG734A8 PEG736A8 C361...
  • Page 50 DEH-8300SD/XNEW5...
  • Page 51 DEH-8300SD/XNEW5...
  • Page 52 DEH-8300SD/XNEW5...
  • Page 53 DEH-8300SD/XNEW5...

  • Page 54: Tuner Amp Assy (2/2) (Guide Page)

    10.2 TUNER AMP ASSY (2/2) (GUIDE PAGE) CN701 CD:+3.04 dBs only A,C,D only B SD:+3.04 dBs only A,B DEH-8300SD/XNEW5...
  • Page 55 TUNER AMP ASSY A:DEH-8300SD/XNEW5 B:DEH-P8300UB/XNUC C:DEH-8350SD/XNES D:DEH-8350SD/XNES1 SYS+B 8.4V 5.2V 3.3V SWVDD USB5V 5.0V ILM+B 10.39V(DIM OFF) 7.59V(DIM ON) MECHA VD 7.4V 9.4V REG 9.4V OEL+B 15.5V CWW3490 DEH-8300SD/XNEW5...
  • Page 56 DEH-8300SD/XNEW5...
  • Page 57 DEH-8300SD/XNEW5...
  • Page 58 DEH-8300SD/XNEW5...
  • Page 59 DEH-8300SD/XNEW5...

  • Page 60: Keyboard Unit

    10.3 KEYBOARD UNIT MULTI-CONTROL CN801 DISP SRC/OFF AUX:+2.20 dBs LIST iPOD/LOC BAND/ESC EJECT USB:+3.04 dBs ES,ES1 S1849 MUTE/CLK CLK/DISP OFF CLK/DISP OFF S1836 TA/NEWS S.Rtrv/SAT SW/BASS S1848 TAG/S.Rtrv TAG S.Rtrv DEH-8300SD/XNEW5...
  • Page 61 KEYBOARD UNIT PEG738A8 PD8194A9 DEH-8300SD/XNEW5...

  • Page 62: Cd Core Unit (S11Std-Dout)

    MOTOR DRIVER LOGIC TABLE PowVcc2 1u/10 VO1- VO4- LOAD PLAY (1608) (1608) VO1+ VO4+ CLCONT VO2- VO3- LOEJ SWITCHES: CD CORE UNIT VO2+ VO3+ CONT S901:HOME SWITCH..ON-OFF IC301 S903:DSCSNS SWITCH..ON-OFF BA5839FP S905:8EJ SWITCH....ON-OFF The underlined indicates the switch position. PGND DEH-8300SD/XNEW5...
  • Page 63 3.3V LRCK 10 GND R606 BCLK DATA 11 DATA NM (1608) DATA BCLK 12 BCLK LRCK 13 LRCK AAGND1 AAGND2 14 GND 15 PGND /WAIT 16 WAIT i h g PGND NO MOUNT PARTS (NM) Land for manual soldering DEH-8300SD/XNEW5...

  • Page 64: Waveforms

    500 s/div fRFAGC 500 mV/div 500 mV/div 500 mV/div 9TIN 500 mV/div Focus Search waveform Track Open waveform 100 Track Jump waveform (32 Track Jump x 3) Ref.: Ref.: Ref.: REFO REFO REFO Mode: Mode: Mode: TEST TEST TEST DEH-8300SD/XNEW5...
  • Page 65 12 cm CD Eject operation Ref.: Ref.: Ref.: REFO AGND Mode: Mode: Mode: Normal Normal Normal fRFAGC 1 V/div 500 s/div 9TIN 1 V/div 1 V/div aFIN 1 V/div Black Dot (800 m) during play Ref.: REFO Mode: Normal DEH-8300SD/XNEW5...

  • Page 66: Pcb Connection Diagram

    R858 C842 Q871 Q852 L852 R787 R856 R788 C785 C784 C783 C855 R853 R491 R852 C491 C853 Q491 Q842 R498 IC851 IC491 D851 C854 R500 C852 C851 R851 SD CARD L851 CN781 R860 Q853 Q854 C802 KN801 P851 S651 DEH-8300SD/XNEW5...
  • Page 67 R500 R814 D431 C686 C552 R801 C685 C551 R809 R808 VA805 R831 L801 C565 C684 R567 R565 R566 C569 C683 R817 C567 C563 VA803 D802 D801 C433 R815 R804 C802 KN801 CN802 IC431 S831 CN801 S651 S652 CN1801 FRONT DEH-8300SD/XNEW5...
  • Page 68 TUNER AMP ASSY TEST1 PCL1 DEH-8300SD/XNEW5...
  • Page 69 SIDE B DEH-8300SD/XNEW5...

  • Page 70: Keyboard Unit

    11.2 KEYBOARD UNIT KEYBOARD UNIT SIDE A R1843 R1842 C1853 D1853 D1852 C1876 C1926 C1872 R1872 R1873 X1871 R1902 R1903 R1882 R1871 R1916 R1896 R1897 R1898 R1900 R1895 R1911 R1910 DEH-8300SD/XNEW5...
  • Page 71 KEYBOARD UNIT SIDE B C1861 VA1812 R1862 R1856 D1807 D1808 C1806 C1807 R1880 C1922 R1877 L1921 L1821 C1823 CN801 R1893 R1908 R1909 R1899 C1822 C1821 R1823 R1822 R1821 DEH-8300SD/XNEW5...

  • Page 72: Cd Core Unit (S11Std-Dout)

    C213 C214 R215 R306 C215 R308 C305 C304 C203 C238 C307 C212 C240 C299 IC201 R307 R305 C207 C204 R707 C209 X201 R294 IC301 R264 C702 R225 R282 C211 R708 C210 R232 R709 R281 C306 R710 C701 CN701 CN701 DEH-8300SD/XNEW5...
  • Page 73 C231 C232 S905 C233 R237 R723 R721 R722 R260 R702 R297 R701 R283 R242 R602 C283 C281 C602 R292 R291 C282 R243 R606 R604 DSCSNS R299 R601 R706 C708 R293 C601 S903 C705 C703 R603 C710 C284 C707 R711 DEH-8300SD/XNEW5...

  • Page 74: Electrical Parts List

    12. ELECTRICAL PARTS LIST Circuit Symbol and No. Part No. Circuit Symbol and No. Part No. IC 591 (A,44,72) Regulator IC S-1172B33-E6 A:DEH-8300SD/XNEW5 IC 592 (A,56,68) IC BH12PB3WHFV B:DEH-P8300UB/XNUC IC 601 (A,127,93) IC(A) PEG735A8 (A,127,93) IC(B) PEG734A8 C:DEH-8350SD/XNES (A,127,93) IC(C,D)
  • Page 75 RS1/16SS223J JA101 (A,150,136) Connector(B) CKS5271 JA301 (A,24,137) Pin Jack XKB7001 R 317 (A,20,126) RS1/16SS472J R 318 (A,19,126) RS1/16SS472J JA401 (A,168,128) Antenna Jack YKS5041 R 319 (A,29,127) RS1/16SS472J JA661 (A,47,138) Connector CKS4124 R 320 (A,28,127) RS1/16SS472J JA981 (A,118,140) Plug CKM1586 DEH-8300SD/XNEW5...
  • Page 76 R 502 (A,136,74) RS1/16SS101J R 661 (A,56,136) RS1/10SR102J R 662 (A,56,135) RS1/10SR102J R 503 (A,134,52) RS1/16SS473J R 701 (A,91,46) RS1/16SS472J R 504 (A,135,56) RAB4CQ101J R 702 (A,91,44) RS1/16SS473J R 506 (A,131,75) RS1/16SS473J R 508 (A,132,75) RS1/16SS473J R 703 (A,91,42) RS1/16SS472J DEH-8300SD/XNEW5...
  • Page 77 RS1/4SA181J R 862 (A,29,47) RS1/16SS0R0J C 243 (A,52,50) CKSRYB224K16 R 863 (A,31,20) RS1/10SR0R0J C 301 (A,28,120) 10 uF CCG1192 R 901 (A,13,72) RS1/16SS681J C 302 (A,27,122) 10 uF CCG1192 R 902 (A,14,73) RS1/16SS681J C 303 (A,38,126) 10 uF CCG1192 DEH-8300SD/XNEW5...
  • Page 78 CKSSYB104K16 C 526 (A,114,75) CKSSYB104K10 C 901 (A,17,64) 1 500 uF/16 V CCH1201 C 527 (A,112,74) CKSSYB104K10 C 902 (A,15,80) CKSSYB103K16 C 528 (A,112,75) CKSSYB104K10 C 904 (A,18,71) 10 uF CCG1192 C 905 (A,23,71) CKSQYB475K6R3 C 529 (A,106,73) CKSSYB104K10 DEH-8300SD/XNEW5...
  • Page 79 C 1872 (A,108,19) CKSRYB105K16 R 1825 (B,49,23) RS1/10SR332J C 1873 (A,132,12) CKSRYB104K16 R 1826 (B,53,12) RS1/10SR102J C 1874 (A,83,20) CKSRYB105K16 R 1828 (B,58,8) RS1/10SR103J C 1875 (B,79,6) CKSRYB103K50 R 1829 (B,49,24) RS1/10SR222J C 1924 (A,111,16) CKSQYB105K25 R 1842 (A,162,27) RS1/10SR222J DEH-8300SD/XNEW5...
  • Page 80 R 291 (B,31,17) RS1/16SS560J R 292 (B,32,16) RS1/16SS0R0J R 293 (B,32,11) RS1/16SS0R0J R 294 (A,18,28) RS1/16SS471J R 296 (B,32,30) RS1/16SS0R0J R 299 (B,31,13) RS1/16SS0R0J R 305 (A,60,34) RS1/16SS183J R 306 (A,61,37) RS1/16SS183J R 307 (A,58,34) RS1/16SS183J R 308 (A,58,36) RS1/16SS183J DEH-8300SD/XNEW5...

This manual is also suitable for:

Deh-p8300ub/xnucDeh-8350sd/xnesDeh-8350sd/xnes1

Table of Contents