Table of Contents
Advertisement
Quick Links
Data
Projector
Operating Instructions
Before operating the unit, please read this manual and supplied Quick Reference Manual
thoroughly and retain it for future reference.
VPL-FH500L/FH500
VPL-FX500L/FX500
Not all models are available in all countries and area. Please check
with your local Sony Authorized Dealer.
© 2010 Sony Corporation
4-191-106-17 (1)
Advertisement
Table of Contents
Related Manuals for Sony VPL-FX500
Summary of Contents for Sony VPL-FX500
- Page 1 Before operating the unit, please read this manual and supplied Quick Reference Manual thoroughly and retain it for future reference. VPL-FH500L/FH500 VPL-FX500L/FX500 Not all models are available in all countries and area. Please check with your local Sony Authorized Dealer. © 2010 Sony Corporation...
-
Page 2: Table Of Contents
Table of Contents Overview Network Location and Function of Controls ..3 Using Network Features ....29 Main Unit ........3 Displaying the Control Window of the Projector with a Web Terminals ........4 Browser ........29 Remote Commander and Control Confirming the Information Panel .......... -
Page 3: Location And Function Of Controls
B Overview Location and Function of Controls Main Unit 6 9 qs a Lens (not supplied) (page 40) j Terminals (page 4) b Front panel (page 40) k Optional adapter slot (page 47) Install an optional adapter (not c Lamp cover (page 36) supplied). -
Page 4: Terminals
Note For coupling control of multiple projectors with the wired Remote * Regarding attachable optional adapter, Commander. consult with qualified Sony personnel. m AC IN (∼) socket Output (page 11) Connects the supplied AC power cord. h OUTPUT Video: Monitor output terminal... -
Page 5: Remote Commander And Control Panel
Remote Commander and Control Panel Remote Commander b Selecting an input signal (page 12) INPUT key (main unit) Direct input select keys (Remote STANDBY Commander) VPL-FH500L: The F key is not provided INPUT in this projector. VPL-FX500L: The D, E, and F keys are not provided in this projector. - Page 6 e Using various functions during Notes projecting • When displaying a two pictures, the ? (On) key, 1 (standby) key, INPUT key, D ZOOM (Digital Zoom) +/– key and MUTING (PIC) key are available. Enlarges a portion of the image while •...
- Page 7 Others ECO Mode Menu g Infrared transmitter ECO Mode h ID MODE 1/2/3 switch (page 23) User Sets an ID mode of the Remote Commander. If you assign a different ID Back number to each projector when multiple 2 Press the V/v key or ECO MODE key projectors are used, you can control only to select ECO or User mode.
-
Page 8: Connecting The Projector
B Preparation Connecting the Projector Notes • Turn off all equipment before making any connections. • Use the proper cables for each connection. • Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself. •... -
Page 9: Connecting A Video Equipment
• The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) Signal or CEC (Consumer Electronics Control) Signal. • Use HDMI-compatible equipment which has the HDMI Logo. • Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are recommended.) Connecting a Video Equipment Connections with a VHS video deck, DVD player, or BD player are explained for each input signal. - Page 10 • The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) Signal or CEC (Consumer Electronics Control) Signal. • Use HDMI-compatible equipment which has the HDMI Logo. • Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are recommended.) Connecting the Projector...
-
Page 11: Connecting An External Monitor
To attach the HDMI cable Fix the cable to the cable tie holder at the bottom of the projector, using a commercially available cable tie, as in the illustration. Use a cable tie of less than 1.9 mm × 3.8 mm in thickness. Bottom of the projector Cable tie (commercially available) -
Page 12: Projecting/Adjusting An Image
B Projecting/Adjusting an Image Projecting an Image The size of a projected image depends on the distance between the projector and screen. Install the projector so that the projected image fits the screen size. For details on projection distances “Projection Distance and Lens Shift Range” (page 56) and projected image sizes, see Input select window Input... -
Page 13: Adjusting The Focus, Size, And Position Of The Projected Image
Adjusting the Focus, Size, and Position of the Projected image Focus Size (Zoom) Position (Lens shift) When attaching the Electric When attaching the Electric Press the SHIFT key on the zoom lens focus lens projector or the Remote Commander then press the V/v/ Press the FOCUS key on the Press the ZOOM key on the B/b key to adjust the position. -
Page 14: Turning Off The Power
Adjusting the tilt of the projector Turning Off the Power with the rear feet (adjustable) When the projector is installed on an uneven Press the ?/1 key on the main unit or surface, you can adjust using the rear feet 1 key on the Remote Commander. -
Page 15: Using A Menu
B Adjustments and Settings Using a Menu Using a MENU Note The menu displays used for the explanation below may be different depending on the model you are using. Press the MENU key to display the To return to the selection screen of the setting items, press the B key or the menu. -
Page 16: The Picture Menu
The Picture Menu For adjusting the picture for each input signal. Setting items Description Picture Mode Dynamic: Emphasizes the contrast to produce a “dynamic and vivid” picture. Standard: Makes the picture be natural and well balanced. Presentation : Makes the picture bright to suit for a presentation. Reset The picture settings are initialized to their factory preset values. - Page 17 *7: When a progressive signal is input, this option is not available. *8: Available when a computer signal is input from the DVI-D input terminal (INPUT C) and HDMI input terminal (INPUT D). This projector is not to be used as a device for medical diagnosis (VPL-FH500L).
-
Page 18: The Screen Menu
The Screen Menu For adjusting the size, position, and aspect ratio of the projected image for each input signal. Setting items Description Aspect Changes the aspect ratio of the projected image. (page 20). When the Full1: Displays the image to fit the maximum projected image size without computer changing the aspect ratio of the input signal. - Page 19 *3: Available when a video signal is input from the YP input terminal (INPUT A), DVI-D input terminal, HDMI input terminal, and optional adapter. *4: Available when a computer signal is input from the RGB input terminal (INPUT A, INPUT B). *5: If the projected image includes large amount of black portion around it, the APA function will not work properly and a part of the image may not be displayed on the screen and also optimum image cannot be obtained, depending on the type of input signal.
- Page 20 Aspect VPL-FH500L *1: If you select “Normal,” the image is Input signal Recommended projected in the same resolution as the setting value and input signal without changing the aspect projected image ratio of the original image. *1 *2 (4:3) (Full1) *2: If you select “Full2,”...
- Page 21 VPL-FX500L *1: If you select “Normal,” the image is Input signal Recommended projected in the same resolution as the setting value and input signal without changing the aspect projected image ratio of the original image. (4:3) (Full1) *2: If you select “Full2,” the image is projected to fit the projected image size, regardless *1 *2 (16:9)
-
Page 22: The Function Menu
The Function Menu The Function menu is used for setting various functions of the projector. Setting items Description Smart APA On/Off; When set to “On,” executes APA automatically when a signal is input. CC1/CC2/CC3/CC4/Text1/Text2/Text3/Text4: Select the closed CC Display caption service (Captions or Text). Off: Closed caption does not appear. -
Page 23: The Operation Menu
*1: Available for VPL-FH500L only *2: You will not be able to use the projector if you forget your password. If you call qualified Sony personnel because you have forgotten the password, you will be asked to verify the projector’s... - Page 24 serial number and your identity. (This process may differ in other countries/regions.) Once your identity has been confirmed, we will provide you with the password. The Operation Menu...
-
Page 25: The Connection/Power Menu
The Connection/Power Menu The Connection/Power menu is used for setting for the connections and power. Setting items Description Network Setting IP Address Setup Auto (DHCP): The IP address is assigned automatically from the DHCP server such as a router. Manual: To specify the IP Address manually. IP Address/ Subnet When “Manual”... -
Page 26: The Installation Menu
The Installation Menu The Installation menu is used for installing the projector. Setting items Description Image Flip HV/H/V/Off: Flips the projected image horizontally and/or vertically according to the installation method. Installation Attitude Link to Image Flip/Right Side Up/Upside Down/Front Down/Front Up: Change the cooling setting to suit to the installation attitude. - Page 27 Setting items Description *2 *5 Panel Alignment This feature allows you to adjust the gaps in the color of characters or the picture. When set to “On,” “Adjust Color” and “Pattern Color” can be assigned and adjusted. Adjust Item: Selects how to make adjustments from below. Shift: Shifts the whole picture and makes adjustments.
-
Page 28: The Information Menu
The Information Menu The Information menu enables you to confirm various information on the projector, such as the total usage hours of a lamp. Items Description Model Name Displays the model name. Serial No. Displays the serial number. fH / fV (horizontal Displays the horizontal frequency/vertical frequency of the current input frequency/vertical signal. -
Page 29: Using Network Features
B Network Using Network Features Connection to the network allows you to operate the following features: • Checking the current status of the projector via a Web browser. • Remotely controlling the projector via a Web browser. • Receiving the Mail Report for the projector. •... -
Page 30: Confirming The Information Regarding The Projector
(*****) that was set. Set the Mail Report function on the Setup page. Note Entered values will not be applied unless If you forget your password, consult with you click on [Apply]. qualified Sony personnel. Using Network Features... - Page 31 Enter the outgoing e-mail address in Click on [Owner information] to enter the Email Address box then check the the owner information recorded in the Report Timing check box of the Mail Mail Report. Report to be sent. Set the mail account for sending mail reports.
-
Page 32: Indicators
Flashes in red The projector is in abnormal status. Symptoms are indicated by number of flashes. Address the problem in accordance with the following. If the symptom is shown again, consult with qualified Sony personnel. Flashes twice The internal temperature is unusually high. Check the items below. -
Page 33: Messages List
Error occurred on An error occurred in the lamp and another lamp is lit. – Lamp1. Lamp 2 is lit. Error occurred on Lamp Lamp 1 is lit. The shutter did not Consult with qualified Sony personnel. – work. Messages List... -
Page 34: Troubleshooting
Troubleshooting Before asking to have the projector repaired, try to diagnose the problem, following the instructions below. Symptom Remedy Page The power is not turned Check if the AC power cord is firmly connected. – When the “Panel Key Lock” is set to “On,” you cannot turn on the projector using the ?/1 key on the projector. - Page 35 Symptom Remedy Page The Remote Check that the batteries are installed correctly. – Commander does not Check that the batteries are not exhausted. – work. Check if the “ID Mode” of the projector corresponds to that of 7, 23 the Remote Commander. Check the setting for “IR Receiver.”...
-
Page 36: Replacing The Lamp
Do not put your hands into the slot. • If the lamp breaks, contact qualified Sony personnel. Do not replace the lamp yourself. • When removing the lamp, be sure to pull it out straight, by holding it by the specified part. - Page 37 Screws Lamp contains mercury. Dispose according to applicable local, state/province and federal laws. For additional information, see www.sony.com/ mercury Grab Screws Note Lamp 1 and Lamp 2 are of the same type. They are installed in opposite vertical orientation to each other. When removing, note the orientation of each lamp.
-
Page 38: Replacing The Air Filter Cartridges
Replacing the Air Filter Cartridges After replacing the lamp, replace the air filter cartridges. When replacing the air filter cartridges, replace all 4 cartridges supplied with the replacement lamps. Caution If you continue to use the air filter cartridges, dust may accumulate, clogging it. As a result, the temperature may rise inside the unit, leading to a possible malfunction or fire. - Page 39 Close the air filter cover. Air filter cartridge Tabs Note Be sure to attach the air filter unit firmly; the power cannot be turned on if it is not closed securely. Tabs Air filter Cartridge cartridge holder Return the air filter units to the projector.
-
Page 40: Attaching/Removing The Projection Lens
Attaching/Removing the Projection Lens Notes • Turn off the projector and disconnect the AC power cord from a wall outlet before you remove/ attach the projection lens. • Be careful not to drop the projection lens. • Avoid removing/attaching the lens with the projector installed suspended from a ceiling. •... - Page 41 Align the connectors on the projector A VPLL-FM22/ZM32/ZM42/ZM102/ with those on the projection lens then Z4007/Z4011: Removing the insert the lens all the way in until it is compensating glass securely in place. Before attaching the projection lens to the projector, it is required to remove the Connector section compensating glass from the lens mounting...
- Page 42 For the VPLL-FM21* /ZM31* /ZP41/ B VPLL-FM21 /ZM31 /ZP41/ ZM101* FM22/ZM32/ZM42/ZM101* /ZM102: Use the PK-F500LA1 lens adapter. Attaching the projection lens adapter PK-F500LA1 Before attaching the projection lens to the projector, it is required to attach the lens adapter to the projection lens. Insert the projection lens into the lens adapter as illustrated and fasten it with the four screws supplied with the lens adapter.
- Page 43 When mounting a VPLL-ZP41 For the VPLL-FM22/ZM32/ZM42/ ZM102 Engage the two connectors between the lens adapter and the projection lens, as Use the PK-F500LA2 lens adapter. illustrated. PK-F500LA2 Slide until it clears the gap Attaching/Removing the Projection Lens...
- Page 44 C VPLL-ZM101* D VPLL-Z4007: Adjusting the : Attaching the shading sheet peripheral focus Before attaching the projection lens to the When attaching the VPLL-Z4007, adjust the projector, it is required to attach the shading peripheral focus in addition to the usual sheet supplied with the lens adapter after focus adjustment.
- Page 45 Check the center point of the projected Remove the two screws of the spacer image. If the center point of the projected attached inside the adapter. image is focused, the adjustment is Adapter Spacer complete. If not, repeat steps 3 and 4. When the peripheral focus cannot be adjusted According to the installation conditions, the...
- Page 46 If the peripheral image is less Attach the adapter to the projection focused when the peripheral lens with the six screws. focus ring is rotated clockwise all Screws (6) the way through Remove a spacer. Connector Note When removing or adding the spacer, handle with care and avoid from getting injured.
-
Page 47: Removing
Removing Installing the Optional Adapter Loosen the four screws that secure the front panel (1), and remove the front panel, pulling it forward (2). You can install the optional adaptor in INPUT E of the terminals section of the Loosen the four screws that secure the projector. -
Page 48: Specifications
Specifications Item Description Model name VPL-FH500L/VPL-FX500L Display system 3 LCD system Display device Size of effective VPL-FH500L: 0.95” (24.1 mm) × 3, Aspect ratio 16:10 display area VPL-FX500L: 0.99" (25.0 mm) × 3, Aspect ratio 4:3 Number of pixels VPL-FH500L: 6,912,000 pixels (1920 × 1200 × 3) pixels VPL-FX500L: 2,359,296 pixels (1024 ×... - Page 49 Item Description Model name VPL-FH500L/VPL-FX500L Computer and OUTPUT MONITOR output terminal: Mini D-sub 15-pin video signal input/ female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative, 75 output ohms terminated, RGB/P : 0.7 Vp-p ± 2 dB, 75 ohms terminated, Sync signal: HD, VD 4V (open), 1 Vp-p (75 ohms), positive/negative Control signal...
- Page 50 Item Description Model name VPL-FH500L/VPL-FX500L Outside 530 × 213 × 545 mm (20 " × 8 " × 21 ") (W/H/ dimensions 530 × 204 × 545 mm (20 " × 8 " × 21 ") (W/H/ D) (without protrusions) Mass Approx.
- Page 51 *3: Available for VPL-FH500L only *4: Not all optional accessories are available in all countries and area. Please check with your local Sony Authorized Dealer. *5: Information on accessories in this manual is current as of March 2016. *6: To attach the projection lens to the projector, the PK-F500LA2 projection lens adapter is required.
- Page 52 Pin assignment DVI-D terminal (DVI-D, female) RGB input terminal (Mini D-sub 15- pin, female) T.M.D.S. +5 V Power Data2– Video input Power supply (red) R input for DDC T.M.D.S. Ground (return Data2+ for +5 V) Video input (green) G T.M.D.S. Hot Plug Data2 Shield Detect...
- Page 53 HDMI terminal (HDMI, female) Acceptable Input Signals Computer signal Input terminal fH [kHz]/ Resolution DVI-D fV [Hz] *6 *8 T.M.D.S. T.M.D.S. HDMI Data2+ Clock Shield 640 × 350 31.5/70 – T.M.D.S. T.M.D.S. 37.9/85 – Data2 Shield Clock– 640 × 400 31.5/70 –...
- Page 54 *4: Available for VESA Reduced Blanking Input terminal fH [kHz]/ signals only. Resolution DVI-D fV [Hz] *5: INPUT C is determined as a computer *6 *8 HDMI signal; INPUT D is determined as a digital 1920 × 1080 67.5/60 – TV signal.
- Page 55 Combinations of Input Signals (VPL-FH500L only) INPUT A INPUT B INPUT C INPUT D INPUT E S VIDEO VIDEO picture (RGB/ (RGB) (DVI-D) (HDMI) (Optional adapter) Main picture INPUT A (RGB/ – – – – – INPUT B (RGB) – –...
-
Page 56: Projection Distance And Lens Shift Range
Projection Distance and Lens Shift Range The projection distance refers to the distance between the front of the lens and the projected surface. Projection distance L Front of the lens Projected image The lens shift range represents the distance in percent (%) by which the lens can be shifted from the center of the projected image. - Page 57 Projection distance (VPL-FH500L) Unit: m (inches) Projection image size Projection distance L Diagonal Width × Height VPLL-FM22 VPLL-ZM32 VPLL-ZM42 VPLL-ZP41 1.72 × 1.08 1.48 2.49 – 2.74 3.17 – 3.98 4.28 – 4.78 80" (2.03 m) (68 × 42) (58) (98 –...
- Page 58 Projection distance formula (VPL-FH500L) D: Projected image size (Diagonal) Unit: m (inches) Lens Projection distance L (minimal length) Projection distance L (maximal length) VPLL-FM22 L = 0.0192 × D – 0.0524 – (L = 0.7556 × D – 2.0633) VPLL-ZM32 L = 0.0318 ×...
- Page 59 x VPLL-ZP41, VPLL-Z4019, VPLL-Z4025, VPLL-Z4045 × = VS = 113 – 1.794 or HS ) [%] – – × 113% = HS = 63 – 0.558 or VS ) [%] – – 113% x VPLL-Z4007 = VS = 15 – 2.500 × (HS or HS ) [%] –...
- Page 60 Projection distance (VPL-FX500L) Unit: m (inches) Projection image size Projection distance L Diagonal Width × Height VPLL-FM22 VPLL-ZM32 VPLL-ZM42 VPLL-ZP41 1.63 × 1.22 1.42 2.39 – 2.64 3.05 – 3.82 4.11 – 5.01 80" (2.03 m) (64 × 48) (56) (94 –...
- Page 61 Projection distance formula (VPL-FX500L) D: Projected image size (Diagonal) Unit: m (inches) Lens Projection distance L (minimal length) Projection distance L (maximal length) VPLL-FM22 L = 0.0185 × D – 0.0524 – (L = 0.7265 × D – 2.0633) VPLL-ZM32 L = 0.0305 ×...
- Page 62 x VPLL-ZP41, VPLL-ZM101, VPLL-Z4019, VPLL-Z4025, VPLL-Z4045 × = VS = 96 – 1.500 or HS ) [%] – – × = HS = 64 – 0.667 or VS ) [%] – – x VPLL-Z4007 = VS =7 – 1.750 × (HS or HS ) [%] –...
-
Page 63: Dimensions
Dimensions Front Unit: mm (inches) 530 (20 INPUT B INPUT C DVI-D INPUT D HDMI S VIDEO IN VIDEO IN OUTPUT INPUT A MONITOR RS-232C CONTROL S PLUG IN POWER INPUT E 265 (10 Center of the lens Bottom Unit: mm (inches) 545 (21 474 (18 137.2... - Page 64 When using the PSS-630 projector suspension support Caution Never mount the projector on the ceiling or move it by yourself. Be sure to consult with qualified Sony personnel (charged). Unit: mm (inches) 350 (13 380 (15) 410 (16 455 (18)
- Page 65 The distance L’ between the front of About Trademarks the lens (center) and the front of the • Adobe Acrobat is a trademark of Adobe cabinet Systems Incorporated. Unit: mm (inches) • Kensington is a registered trademark of Lens L’ Type Kensington Technology Group.
-
Page 66: Index
Index fH .............28 Film Mode ..........16 Focus ............5, 13 Freeze ............6 AC IN ............4 Front panel ..........3 Acceptable input signal ......53 Function menu .........22 Adjust Signal ........... 18 fV .............28 Air filter cover ........3, 38 Antitheft bar ..........3 Antitheft lock .......... - Page 67 ON/STANDBY indicator ....3, 32 Terminals ...........3 Operation menu ........23 Troubleshooting ........34 Optional adapter slot ....... 3, 4, 47 Turning off the power ......5, 14 Output ............4 Turning on the power ......5, 12 Over Scan ..........18 Twin picture ..........6 Panel Alignment ........
- Page 68 Sony Corporation...