hit counter script
Fujitsu LIFEBOOK T936 Operating Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. T936
  6. Operating manual

Fujitsu LIFEBOOK T936 Operating Manual

Hide thumbs Also See for LIFEBOOK T936:
Table of Contents

Advertisement

Quick Links

Download this manual
System
Operating manual
FUJITSU LIFEBOOK T936

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu LIFEBOOK T936

Summary of Contents for Fujitsu LIFEBOOK T936

  • Page 1 System Operating manual FUJITSU LIFEBOOK T936...
  • Page 2 You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
  • Page 4 Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions 2016. All rights reserved. Publication Date 02/2016 Order No.: A26391-K446-Z320-1-7619, edition 1...
  • Page 5 FUJITSU LIFEBOOK T936 Operating manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturer’s notes...
  • Page 6 Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.

  • Page 7: Table Of Contents

    Memory cards ................50 Fujitsu...
  • Page 8 Connecting USB devices ..............83 Fujitsu...
  • Page 9 CE marking ................103 Fujitsu...
  • Page 10 Index ................. . 105 Fujitsu...

  • Page 11: Innovative Technology

    The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.

  • Page 12: Notational Conventions

    "Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...

  • Page 13: Ports And Controls

    Notebook open 1 = Microphone 5 = Ambient light sensor 2 = Camera 6 = Clickpad 3 = Camera LED 7 = Clickpad buttons 4 = Windows button 8 = Fingerprint sensor Fujitsu...
  • Page 14 1 = Headphone port 5 = Power-on indicator 2 = USB port 3.0 6 = LAN connector (removable) 3 = HDMI port 7 = Attachment eye for the optional pen tether 4 = ON/OFF switch 8 = Pen slot Fujitsu...
  • Page 15 Ports and controls Underside 1 = Loudspeakers 3 = Battery release 2 = Battery compartment with SIM card 4 = Port for port replicator slot under the battery Fujitsu...

  • Page 16: Important Notes

    "Removing and installing components during servicing", Page This notebook complies with the relevant safety regulations for data processing equipment. If you have questions about using your notebook in a particular area, please contact your sales outlet or our Hotline/Service Desk. Fujitsu...

  • Page 17: Additional Safety Notes For Devices With Wireless Components

    Energy saving under Windows ► Make use of the power management features (see ""Using the power-management features", Page 49"). Travelling with your notebook Mobile operation Notes Transportation Notebook Please observe the points listed below when travelling with your notebook. Fujitsu...

  • Page 18: Before You Travel

    ► Unplug the mains adapter and all external devices from the power socket. ► Disconnect the mains adapter cable and the data cables for all external devices. ► Close the LCD screen. ► To protect against damaging jolts and bumps, use a notebook carrying case to transport your notebook. Fujitsu...

  • Page 19: Cleaning The Notebook

    The casing surfaces may be cleaned with a dry cloth. If particularly dirty, use a damp cloth that has been dipped in water mixed with mild domestic detergent and then carefully wrung out. To clean the keyboard and the Clickpad, you can use disinfectant wipes. Ensure that no liquid enters the device. Fujitsu...

  • Page 20: First-Time Setup Of Your Device

    ► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu...

  • Page 21: Selecting A Location

    ► Connect the power cable (1) to the mains adapter. ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...

  • Page 22: Switching On The Device For The First Time

    If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet under "http://www.fujitsu.com/fts/support/". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".

  • Page 23: Working With The Notebook

    Please refer to the notes in "Important notes", Page Status indicators Statusindicators Symbols The status indicators provide information about the status of the power supply, the drives and the keyboard functions etc. Fujitsu...
  • Page 24 Drive indicator The indicator is illuminated: The hard disk drive is being accessed. Wireless components indicator • The indicator is illuminated: The wireless components are switched on. • The indicator is not lit: The wireless components are switched off. Fujitsu...

  • Page 25: Opening The Notebook

    Working with the notebook Opening the notebook ► Open the LCD screen. Fujitsu...

  • Page 26: Switching On The Notebook

    Control Panel - Hardware and Sound - Power Options If you have assigned a password, you must enter this when requested to do so, in order to start the operating system. Detailed information can be found in the chapter "Security functions", Page Fujitsu...

  • Page 27: Different Ways To Use Your Notebook

    Please note that the display cannot be turned completely on its own axis! Stop turning the display as soon as you feel resistance. No guarantee services can be provided for damage caused due to incorrect turning. From notebook to Tablet PC ► Raise the LCD display into a vertical position. Fujitsu...
  • Page 28 ► Hold the screen as low as possible on both sides. Turn the screen to the left or right in the direction of the arrow. At first you will feel some slight resistance, then it will turn easily and without friction. ► Turn the display further until it has turned 180° and the hinge latches in. Fujitsu...

  • Page 29: Select Display Orientation (Portrait Or Landscape Orientation)

    You can choose to use either portrait or landscape orientation for the display. Windows 7 You can change these settings in the Fujitsu menu or under Start - (Settings -) Control Panel - Hardware and Sound - Display - Settings.

  • Page 30: From Tablet Pc To Notebook

    Working with the notebook From Tablet PC to notebook ► Raise the LCD screen into a vertical position. Fujitsu...

  • Page 31: Switching Off The Notebook

    ► Turn or move the display further until it has turned 180° and the hinge latches in. Switching off the notebook Notebook ► Close all applications and then shut down the operating system (please see the "Operating System Manual"). Fujitsu...

  • Page 32: Closing The Notebook

    Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish, Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian. Under Windows 10 you can set the required language under Control Panel – Time, Language and Region – Language. Fujitsu...

  • Page 33: Lcd Screen

    LCD screen LCDscreen Notes Fujitsu notebooks have high-quality LCD monitors (TFT). For technical reasons, these monitors are manufactured for a specific resolution. An optimal, clear picture can only be ensured with the resolution intended for the relevant monitor. A resolution which differs from the specification can result in an unclear picture.

  • Page 34: Using Fingers

    ► Touch the desired item once with your finger mouse button) tip. Keep the finger tip pressed against the touchscreen. The context menu appears. Moving the cursor ► Position one finger on the touchscreen and move the finger in the desired direction. Fujitsu...
  • Page 35 ► Position two fingers on the touchscreen. ► Move your fingers upwards to scroll up. ► Move your fingers downwards to scroll down. Rotating ► Position the thumb on the touchscreen, then turn the picture clockwise or counter-clockwise using your index finger. Fujitsu...
  • Page 36 ► Position two fingers on the touchscreen and move them apart to increase the view. ► Position two fingers on the touchscreen and move them together to decrease the view. Blocking context-sensitive menus ► With two fingers, tap twice briefly in quick succession on the touchscreen. Fujitsu...

  • Page 37: Using The Pen

    To avoid damage, the pen should be stored in the pen slot when not in use. The pen can be influenced by electromagnetic fields (cursor quivers or jumps). There may be a few areas on the screen where the cursor quivers slightly in spite of pressing the pen down firmly. Fujitsu...
  • Page 38 Operating system Menu Windows 7 / To calibrate, call up the Hardware and Sound / Tablet PC Settings function Windows 10 in the Control Panel. You need to calibrate both portrait and landscape formats. Fujitsu...
  • Page 39 You should attach the pen with a optionally available pen tether to prevent accidentally dropping or losing it. ► Attach one end of the pen tether to your pen and the other end of the pen tether to your notebook. Fujitsu...

  • Page 40: Using The Device As A Notebook

    ► Tap the Clickpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the field you wish to select. Clickpad ► Tap the Clickpad twice or press the left button twice. The command is executed. Fujitsu...
  • Page 41 ► Press and hold the left button and drag the item to the desired position with the finger on the Clickpad. The item will be moved. Switching the Clickpad on and off You can switch the Clickpad on and off via a shortcut, see "Key combinations", Page Fujitsu...

  • Page 42: Keyboard

    The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Alt Gr Fujitsu...
  • Page 43 The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor controlkeys Windows key The Windows key switches between the start screen and the last used application. Windowskey Menu key The Menu key opens the menu for the active application. Fujitsu...

  • Page 44: Virtual Numeric Keypad

    Further information about the status indicators can be found in chapter "Status indicators", Page Country and keyboard settings ► Change the country and keyboard settings as described in the documentation for your operating system. Fujitsu...

  • Page 45: Key Combinations

    Increase screen brightness This key combination increases the screen brightness. Fn+F7 Screenbrightness Decrease volume This key combination reduces the volume of the internal loudspeakers. Fn+F8 Volume Increase volume This key combination increases the volume of the internal loudspeakers. Fn+F9 Volume Fujitsu...
  • Page 46 This key combination opens the Windows security/Task Manager Ctrl window. Strg+Alt+Entf/Ctrl+Alt+Del Back tab This key combination moves the cursor back to the previous tab stop. Shift+Tab Backtab Key combinations using the Windows keys are detailed in the manual for your operating system. Fujitsu...

  • Page 47: Tablet Buttons

    If the button is pressed in combination with the ON/OFF switch, the function corresponds to the key combination Ctrl Volume up button This button increases the volume of the built-in loudspeakers. Volume down button This button reduces the volume of the built-in loudspeakers. Fujitsu...

  • Page 48: Camera

    LCD screen may flicker while the light level is adjusted. Further information on using the camera and on the additional settings which are possible for your camera can be found in the help function of the program which uses the camera. Fujitsu...

  • Page 49: Rechargeable Battery

    Never store the batteries in the device. Removing and installing the battery Only use batteries approved by Fujitsu for your notebook. Never use force when fitting or removing a battery. Make sure that no foreign bodies get into the battery connections.
  • Page 50 ► Remove all the cables from the device. ► Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an anti-slip cloth on this surface to prevent the device from being scratched. Fujitsu...
  • Page 51 ► Slide the battery release in the direction of the arrow (1) and hold it in place. ► Slide the battery release in direction of the arrow (2). ► Remove the battery compartment cover (3). ► Lift the battery out of the battery compartment (4). Fujitsu...
  • Page 52 ► Slide the battery release in direction of the arrow (3). The battery is secured. ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that were previously disconnected. Fujitsu...

  • Page 53: Using The Power-Management Features

    ► Select the Screen Saver in your Control Panel. The recommended settings for the Windows energy saving functions are predefined as "Fujitsu Computer EcoSettings" in the Power Options of the Control Panel and can be displayed there.

  • Page 54: Memory Cards

    In order to protect your data, always follow the correct procedure for removing the card (see the documentation for your operating system). ► Press on the memory card (1). Memory card The memory card is released and can now be removed. ► Pull the memory card out of the slot (2). Fujitsu...

  • Page 55: Loudspeakers And Microphones

    ► Insert the SIM card (2) into the SIM card holder as shown in the diagram on the SIM card holder. ► Push the SIM card holder back into the slot (3). ► Install the battery again, see Chapter "Inserting battery", Page Fujitsu...

  • Page 56: Removing The Sim Card

    Wireless LAN / Bluetooth / UMTS / LTE wireless components (depending on configuration) The installation of wireless components not approved by Fujitsu will invalidate the certifications issued for this device. Depending on the device configuration you ordered, your device will be equipped with Wireless LAN, Bluetooth, UMTS or LTE.

  • Page 57: Setting Up Wlan Access

    If you did not order a UMTS / LTE module, you can purchase the accessories for UMTS / LTE reception from your retailer or your Fujitsu Technology Solutions dealer. You will find information on establishing the connection with the UMTS / LTE network in the documentation for the hardware used.

  • Page 58: Ethernet And Lan

    ► Connect the network cable to your network port. Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Fujitsu...

  • Page 59: Your Port Replicator (Optional)

    8 = Connector on the Port Replicator for the docking port on the underside 3 = LAN port of the notebook 4 = DisplayPort 9 = Release 5 = DVI port 10 = ON/OFF button 6 = VGA monitor port Fujitsu...

  • Page 60: Setting Up The Port Replicator

    • Never place the port replicator and the mains adapter on a heat-sensitive surface. • Do not expose the port replicator to extreme environmental conditions. Protect the port replicator from dust, humidity and heat. Fujitsu...

  • Page 61: Connect The Notebook To The Port Replicator

    ► Press down on the notebook’s rear corners so that it locks into position (2). ► Connect the mains adapter cable to the DC jack (DC IN) of the Port Replicator (3). ► Connect the power cable to the mains adapter (4). ► Plug the power cable into the mains socket (5). Fujitsu...

  • Page 62: Switching On The Notebook Via The Port Replicator

    If the notebook cannot be shut down properly, press the ON/OFF button on the Port Replicator for approx. four seconds. The notebook will switch off. Any unsaved data may however be lost. Fujitsu...

  • Page 63: Disconnecting The Notebook From The Port Replicator

    Working with the notebook Disconnecting the notebook from the Port Replicator ► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch. ► Lift off the notebook (2). Fujitsu...

  • Page 64: Security Functions

    If you forget your passwords you will need to contact the our Service Desk. Deletion or resetting of passwords is not covered by your warranty and a charge will be made for assistance. Fujitsu...

  • Page 65: Brief Overview Of Security Functions

    Brief overview of security functions Detailed information about the security equipment of your device can be found in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD or on the Internet at "http://www.fujitsu.com/fts/support/index.html". Security functions Type of protection Preparation...

  • Page 66: Configuring The Fingerprint Sensor

    Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable on the device on your notebook.

  • Page 67: Configuring Password Protection In Bios Setup Utility

    The notebook is then rebooted and the new password comes into effect. It will now be necessary to first enter your supervisor or user password in order to open the BIOS Setup Utility. Please note that the user password only provides access to a few of the BIOS settings. Fujitsu...

  • Page 68: Password Protection For Booting Of The Operating System

    ► Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. ► Select the Save Changes & Exit option under Exit. The notebook will reboot. The system is no longer password-protected. Fujitsu...

  • Page 69: Password Protection For The Hard Disk

    SmartCard with you. In order to be able to take advantage of all the security features of your notebook, you will need a CardOS SmartCard from Fujitsu. The SmartCard can only be used with a PIN, offering maximum protection even if you lose the SmartCard.

  • Page 70: Smartcard Systemlock (Depending On Configuration)

    With SystemLock enabled, the device can only be started using an initialised SmartCard (SICRYPT, CardOS or Fujitsu) and a personal identification number (PIN). The SmartCard and PIN are checked during system booting in the BIOS, i.e. before the operating system is started.

  • Page 71: Access Rights Of Smartcards

    Unblocking all blocked SmartCards Generating user cards Uninstall SystemLock * BIOS Setup setting (Unblock own SmartCard) Usually there is always one Admin SmartCard and at least one User or SuperUser SmartCard that will allow a system to be operated. Fujitsu...

  • Page 72: Smartcard User Groups

    User SmartCards or SuperUser SmartCards must still be generated using SystemLock so that users can access the systems within the user group. Using a User SmartCard or SuperUser SmartCard a user can log on to each system within the user group. Fujitsu...

  • Page 73: Installing Systemlock

    (administrator), e.g. to initialise user cards. You need an Admin SmartCard if you want to set up a user group. You use the Admin SmartCard to add further systems to the user group. Fujitsu...
  • Page 74 Enter new PIN: Confirm new PIN: A number with 4 to 8 digits is acceptable for the new PUK. For security reasons, we recommend that you change the PUK for every SmartCard, and use an 8-digit number each time. Fujitsu...
  • Page 75 Change PUK, press the Enter key and input the new PUK. ► First enter the preset PUK. Enter the PUK: New SmartCards have a preset PUK (see above). You will need to know the PUK assigned to the SmartCard if you want to re-initialise a previously initialised SmartCard. Fujitsu...
  • Page 76 ► If you do not want to initialise any further SmartCards, press and remove the Admin SmartCard. NEVER write the PIN or PUK on the SmartCard under any circumstances! Keep the SmartCard and PIN/PUK in a safe place and protect them from unauthorised access. Fujitsu...

  • Page 77: Adding A System To A User Group

    ACCESS DENIED = You have confirmed the PIN incorrectly. You are then requested to enter and confirm the new PIN again. After three failed attempts, the SmartCard will be blocked and can then only be activated again by entering the PUK. Enter the PUK: Fujitsu...
  • Page 78 F5,function key F6,function key F8,function key F9,function key Generate a user card for the device as described in Section "Carrying out administrator functions", Page ► If you do not want to initialise any further SmartCards, press remove the Admin SmartCard. Fujitsu...

  • Page 79: Carrying Out Administrator Functions

    ► Press the desired function key. The following message will be displayed: Remove the SmartCard. ► Remove the Admin SmartCard. Insert a SmartCard. Keep the Admin SmartCard in a safe place and protect it from unauthorised access. Fujitsu...
  • Page 80 Always change the PIN and PUK for all further SmartCards. The PUK is used to re-activate a blocked SmartCard. ► Remove the User SmartCard and label it, e.g. with the name of the user. But NEVER write the PIN on the SmartCard under any circumstances! Fujitsu...

  • Page 81: Remote Access Enabling

    The activation code can only be used once to start the device; it immediately becomes invalid when the device boots. If you wish to switch off the device and start it again without your SmartCard, the procedure described above must be repeated each time. Fujitsu...

  • Page 82: Switch On The Device Using Systemlock

    ► Confirm the new PIN. Uninstall SystemLock ► Start the device. Uninstalling ► Follow the instructions given in section "Carrying out administrator functions", Page 75. Select "Uninstall" to uninstall SystemLock. You can now use the device again without the need for a SmartCard. Fujitsu...

  • Page 83: Error Messages

    ► Select the Exit Saving Changes option in the Exit menu. ► Press the Enter key and select Yes. The notebook will restart, and TPM will be enabled after the reboot. Fujitsu...

  • Page 84: Disabling Tpm

    ► Select the Exit Saving Changes option in the Exit menu. ► Press the Enter key and select Yes. The notebook will restart and the password prompt will be shown. The OnScreen keyboard will be activated by tapping in the password field. Fujitsu...

  • Page 85: Connecting External Devices

    The HDMI port on your notebook can be used to connect an external amplifier, LCD TV or a plasma TV with an HDMI connection. ► Connect the data cable to the external device. ► Connect the data cable to the HDMI port of the notebook. Fujitsu...

  • Page 86: Connecting An External Monitor To The Port Replicator

    ► First switch on the external monitor and then the notebook. You can also switch between the external monitor and the LCD monitor of the notebook, see chapter "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD monitor simultaneously. Fujitsu...

  • Page 87: Connecting Usb Devices

    Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu...

  • Page 88: Usb Port With Charging Function (Anytime Usb Charge)

    ► Left click on the icon to safely remove hardware, located in the taskbar. ► Select the device which you want to shut down and remove. ► Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu...

  • Page 89: Headphone Port

    If you purchase a cable from a retailer, please note the following information: The headphone port on your notebook is a "3.5 mm jack socket". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug". Fujitsu...

  • Page 90: Removing And Installing Components During Servicing

    Removing and installing components during servicing Removing and installing components during servicing Only qualified technicians should repair your notebook. Unauthorised opening or incorrect repair may greatly endanger the user (electric shock, fire risk) and will invalidate your warranty. Servicing Components Fujitsu...

  • Page 91: Settings In Bios Setup Utility

    ► Press the function key ► If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service centre. The BIOS Setup Utility starts. Fujitsu...

  • Page 92: Operating Bios Setup Utility

    ► Select the option you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...

  • Page 93: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...

  • Page 94: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"...

  • Page 95: The Notebook's Date Or Time Is Incorrect

    ► Press the key combination to switch the screen output, see "Key combinations", Page The LCD screen is difficult to read LCDscreen LCDscreen Cause Troubleshooting Reflected glare ► Turn the notebook or alter the tilt of the LCD screen. ► Increase the brightness of the screen. Fujitsu...

  • Page 96: The External Monitor Remains Blank

    Change the following setting: ► Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. ► Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system. Fujitsu...

  • Page 97: The Cursor Does Not Correctly Follow The Pen Movements

    ► Charge the battery. ► Insert a charged battery. ► Connect the mains adapter to the notebook. The power adapter is not connected correctly. ► Check whether the mains adapter is connected correctly to the notebook. ► Switch the notebook on. Fujitsu...

  • Page 98: The Notebook Stops Working

    The wireless component is enabled. Despite ► Check whether the wireless connection is this, the wireless connection to a network does switched on via the software. not work. ► Further information on using the wireless component can be found in the help files. Fujitsu...

  • Page 99: The Battery Discharges Too Quickly

    Supervisor PIN. SmartCard lost Cause Troubleshooting SmartCard lost ► If you are working in a network, contact your system administrator, who can boot up your notebook with a Supervisor SmartCard. Fujitsu...

  • Page 100: User And/Or Supervisor Smartcard Lost

    The system configuration information is ► Press the function key to access the incorrect. BIOS Setup. ► In the BIOS Setup, select the Exit menu. ► Select the entry Load Setup Defaults. ► Select OK and press the Enter key. Fujitsu...
  • Page 101 System battery is dead - Replace and run SETUP service centre. ► Contact your sales outlet or our customer System cache error - Cache disabled service centre. ► Contact your sales outlet or our customer System timer error service centre. Fujitsu...

  • Page 102: Restoring The Hard Disk Contents Under Windows

    Hard Disk Based Recovery (HDBR) under Windows 7 ► Turn on the device. ► While the Fujitsu start screen is displayed, keep pressing the key until the Advanced Boot Options menu is displayed. ► Select Repair your Computer.

  • Page 103: Technical Data

    12.63 inch x 9.25 inch x 0.67–0.76 inch Weight depending on configuration from 1.5 kg / 3.31 lbs Input devices Keyboard 85 keys with backlit keyboard 2 buttons Clickpad Tablet buttons 1 Windows button, 2 volume buttons 1 freely programmable pen button Slots Fujitsu...

  • Page 104: Port Replicator (Optional)

    4 x USB 3.0 Audio Headphone port Docking port 54-pin Security Lock Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature 5℃ ..35℃ / 41°F ..95°F Transport temperature –15°C ..60°C / 5°F ..140°F Fujitsu...

  • Page 105: Rechargeable Battery

    Technical data Rechargeable battery You will find information on the batteries used in your device on the Internet at "http://www.fujitsu.com/fts/support/". Rated voltage 14.4 V Rated capacity 45 Wh Nominal power 3150 mAh The operating time depends on the device configuration, the active applications and the energy-saving settings.

  • Page 106: Manufacturer's Notes

    Declarations of Conformity Declarationofconformity The "Declarations of Conformity" for the device can be found on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx". Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Fujitsu...

  • Page 107: Ce Marking

    CE nnnn (!) ; nnnn: For digits and exclamation mark (!), see label on the product. The product complies with the legal limits for SAR in the EU. You can find more information and declarations of conformity on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates". This equipment can be used in the following countries: Belgium...
  • Page 108 Other certification markings Certification markings Any other certification markings are listed in the "Manual Appendix - Additional Certifications" supplement. If such markings are available, you can find the supplement on the Internet at "http://support.ts.fujitsu.com/Manuals/" with the Operating Manual for your device. Fujitsu...
  • Page 109 Deactivating 41 correction 90 Dragging items 37 Fingerprint sensor 62 Executing commands 36 configure 62 Moving the pointer 36 First-time setup Selecting an item 36 Fn key 39 Clickpad buttons 41 Fn+F10 42 Components Fn+F2 41 installing / removing 86 Fujitsu...
  • Page 110 64 Line feed 39 protecting with password 64 Loudspeakers 51 switch off 41 switch on 41 Low voltage directive 103 Packaging 16 Password changing 64 entering 63 Mains adapter removing 64 connecting 17 Password protection 63 Fujitsu...
  • Page 111 SmartCard 66 access rights 67 VGA connection socket 82 PIN 67 Virtual numeric keypad 40 PUK 67 Volume user groups 68 decrease 41 Status indicators 19 increase 41 Strg+Alt+Entf / Ctrl+Alt+Del 42 Volume control 51 Summer time 91 Supervisor password Fujitsu...
  • Page 112 Index Switching the module off 52 Windows key 39 Switching the module on 52 Wireless component: Wireless LAN: safety notes 13 safety notes 13 Wireless components 41 Wireless LAN Fujitsu...

Table of Contents