Related Manuals for Bosch 480 Series
Summary of Contents for Bosch 480 Series
- Page 1 Digital Video Recorder 440/480 Series DVR 440 / DVR 480 Installation and Operation manual...
-
Page 2: Table Of Contents
Digital Video Recorder 440/480 Series Table of Contents | en Table of Contents Safety Safety precautions Important safety instructions Important Notices FCC and UL Bosch notices Introduction Digital video recorder applications 2.1.1 Versions 2.1.2 Manuals 2.1.3 Features Unpacking 2.2.1 Package contents Installation environment 2.3.1... - Page 3 | Table of Contents Digital Video Recorder 440/480 Series 4.10 Maintenance Operating instructions Front panel controls 5.1.1 Keys 5.1.2 Indicators Mouse Controls Viewing pictures 5.4.1 Monitor A 5.4.2 Monitor B 5.4.3 Viewing Live and playback 5.5.1 Live mode 5.5.2...
- Page 4 Digital Video Recorder 440/480 Series Table of Contents | en Event 6.4.1 Input 6.4.2 Motion Network 6.5.1 TCP/IP 6.5.2 Streaming to mobile devices 6.5.3 Connecting using a smart mobile phone 6.5.4 DDNS 6.5.5 Notification 6.5.6 Mail System 6.6.1 Date/Time 6.6.2 6.6.3...
- Page 5 | Table of Contents Digital Video Recorder 440/480 Series Menu default values Technical specifications 10.1 Electrical 10.1.1 Mechanical 10.1.2 Environmental 10.1.3 Electromagnetic and Safety 10.2 USB memory sticks Appendix Software licenses A.1.1 Bosch software A.1.2 Other licenses — copyright notices A.1.3...
-
Page 6: Safety
Digital Video Recorder 440/480 Series Safety | en Safety Safety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death. - Page 7 17. Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to operate the equipment.
-
Page 8: Important Notices
Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. - Page 9 SELV - All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV circuits should only be connected to other SELV circuits. Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information.
-
Page 10: Fcc And Ul
Digital Video Recorder 440/480 Series Safety | en FCC and UL FCC Information (U.S.A. and Canadian Models Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 11: Bosch Notices
| Safety Digital Video Recorder 440/480 Series Bosch notices Copyright This manual is the intellectual property of Bosch Security Systems and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly. -
Page 12: Introduction
2.1.1 Versions The DVR 440 Series models have 4 video channels and 4 alarm inputs; the DVR 480 Series models have 8 video channels and 4 alarm inputs. Both versions operate in a similar manner. The illustrations in this manual show the 4-channel version. The 8-channel version has 4 additional video channels and 4 additional alarm inputs. -
Page 13: Features
If any items are missing, notify your customer service representative or Bosch Security Systems sales representative. The shipping carton is the safest container in which to transport the unit. Save it and all packing materials for future use. -
Page 14: Installation Environment
Introduction | en Installation environment 2.3.1 Mounting The DVR 440/480 Series is supplied as a desktop unit. 2.3.2 Ventilation Ensure that the location planned for the installation of the unit is well ventilated. Take note of the locations of the cooling vents in the unit's enclosure and ensure that they are not obstructed. -
Page 15: Quick Install
Connect the ALARM OUT output (via the supplied terminal blocks). Connect a pan/tilt/zoom control unit to the RS-485 port (via the supplied terminal block). Connect to your network via the RJ-45 Ethernet port. Connect a “Bosch RS232 to Bi-phase converter” to the RS-232 port if required. 3.1.3 Powering up Switch on all connected equipment. -
Page 16: First-Time Use
Digital Video Recorder 440/480 Series Quick install | en First-time use The Quick install menu opens the first time the unit is used. Fill in the basic settings in the three tabs to get the unit operational. The unit begins recording automatically when the Quick install menu is closed. -
Page 17: Quick Install Menu
| Quick install Digital Video Recorder 440/480 Series Quick install menu The Quick install menu contains three tabs: International, Continuous Recording, and Network. Click the Exit button to exit the Quick install menu. Changing Quick install settings overwrites customized settings. -
Page 18: Continuous Recording
Digital Video Recorder 440/480 Series Quick install | en 3.3.2 Continuous Recording Figure 3.3 Quick install - Continuous Recording Set the Continuous Recording Resolution, Quality, Frame rate, Covert, and Audio for each profile in the table. Bosch Security Systems Installation and Operation manual... -
Page 19: Network
| Quick install Digital Video Recorder 440/480 Series 3.3.3 Network Figure 3.4 Quick install - Network Fill in the settings that control the behavior of the unit with respect to a network. DVR ID Enter a unique DVR ID to be used in the network. -
Page 20: Hardware Setup
Digital Video Recorder 440/480 Series Hardware setup | en Hardware setup This chapter contains detailed information about the hardware installation and connection of external equipment to the unit. The connector types and their pin signals are described. Most of the connectors are located at the rear panel of the unit. For convenience, one USB port is located on the front of the unit to connect a mouse or memory device. -
Page 21: Monitor Connections
| Hardware setup Digital Video Recorder 440/480 Series Monitor connections Up to two monitors can be connected through the VGA and CVBS connections. 4.3.1 VGA (Monitor A) Connect the unit to one VGA monitor using standard VGA cable. It is advised to use 17”... -
Page 22: Rs-232 Com Port Connections
The RS-232 COM port is used to connect a PC to the unit for service purposes or to connect a Bosch “RS-232 to Bi-Phase Converter”. For service purposes, use a null-modem cable to connect the serial port of the PC to the unit. The Baud rate can be selected in the menu system. -
Page 23: Ethernet Connection
| Hardware setup Digital Video Recorder 440/480 Series Ethernet connection The standard RJ-45 Ethernet socket is used to connect the unit directly to a PC or to a network. To connect directly to a network hub, use a straight-through network cable. To connect directly to a PC, use a cross-over network cable. -
Page 24: Usb Connectors
USB memory device. (Recording to a USB-drive is not supported.) Figure 4.7 USB connector (on front and on rear) RS485 port Connect Bosch or third-party controllable cameras to the unit for pan, tilt, and zoom control. The Bosch protocol is supported with the following baud settings: –... -
Page 25: External Alarm I/O Connection
| Hardware setup Digital Video Recorder 440/480 Series External alarm I/O connection Alarm inputs and outputs are supplied screw down terminal blocks. The screw terminal blocks are supplied with the unit. Connecting the inputs Each (alarm) input line can be switched by a contact from external devices. Wire them as either Normally Open (N/O) or Normally Closed (N/C). -
Page 26: Power Supply
Digital Video Recorder 440/480 Series Hardware setup | en Power supply DC power is supplied to the unit from an AC/DC power supply unit delivered with the unit. For operational reasons, the unit has no on/off switch. This means that the unit is always powered as long as the power cable from the power supply unit is connected to the 12VDC socket. -
Page 27: Operating Instructions
| Operating instructions Digital Video Recorder 440/480 Series Operating instructions These instructions explain the purpose of the front panel keys. The functions available can be limited by setting passwords. Access to the unit’s functions are determined by the user level of the user logged in. -
Page 28: Front Panel Controls
Digital Video Recorder 440/480 Series Operating instructions | en Front panel controls 400 series Figure 5.1 Front panel controls - 4-channel model 400 series Figure 5.2 Front panel controls - 8-channel model 5.1.1 Keys The keys on the front panel control all functions. Symbols on the keys show the functions. - Page 29 | Operating instructions Digital Video Recorder 440/480 Series Exit key – press to return to previous level or to exit the menu system Alarm indicator / acknowledge key – flashes when an alarm is detected – press to acknowledge an alarm event; an indicator light is located on the key Camera keys (1-4)/(1-8) –...
-
Page 30: Indicators
Digital Video Recorder 440/480 Series Operating instructions | en 5.1.2 Indicators The indicators on the front panel display light or flash to alert of various operating conditions. Power - lights green when the unit is powered Network - lights green when a remote user is connected to the unit... -
Page 31: Mouse Controls
| Operating instructions Digital Video Recorder 440/480 Series Mouse Controls All functions controlled by the front panel can, alternatively, be accessed using a USB mouse. All main DVR functions are accessible via the System Control Bar. To display the panel (monitor A only), move the mouse pointer to the bottom left of the screen or press the menu key. -
Page 32: Viewing Pictures
Digital Video Recorder 440/480 Series Operating instructions | en Viewing pictures The unit has two monitor outputs, A and B. The way in which these monitors display pictures depends on how the system is configured. 5.4.1 Monitor A Monitor A is the main monitor. It shows full-screen, quad or multiscreen live or playback camera pictures. -
Page 33: Viewing
| Operating instructions Digital Video Recorder 440/480 Series From the pop-up menu, select the display for Monitor B – Select the quad key to select the quad mode – Select the sequence key to sequence the quad mode 5.4.3 Viewing The tables show all possible views for monitor A. - Page 34 Digital Video Recorder 440/480 Series Operating instructions | en Use the arrow keys to select a camera number (4 or 8) to put in the cameo and press the enter key. Alternatively, right click a cameo with the mouse and choose a video input from the Cameo Menu.
-
Page 35: Live And Playback
| Operating instructions Digital Video Recorder 440/480 Series Live and playback 5.5.1 Live mode The live mode is the normal operating mode of the unit where live pictures are viewed from the cameras. From live mode, switch to playback mode or the system menu. -
Page 36: Overview Of The Menu System
Digital Video Recorder 440/480 Series Operating instructions | en Overview of the menu system The Main menu gives access to several functions to help use the unit. Access to the Main menu is only possible with a User Account at the Administrator User Level. Access the Main menu via: –... -
Page 37: Main Menu
| Operating instructions Digital Video Recorder 440/480 Series 5.6.3 Main menu Camera The Camera menu is used to configure recording settings for the unit. The menu contains eight submenus: – Camera - per camera Enable, Name of the camera, Covert, and Audio –... -
Page 38: Search
Digital Video Recorder 440/480 Series Operating instructions | en – Configuration - Import and Export configuration, reset to Factory defaults, Update firmware and Quick install – Hard Disk - set Overwrite, Disk full warning, Event partition, Auto delete, and format the disk –... -
Page 39: Date/Time Search
| Operating instructions Digital Video Recorder 440/480 Series 5.7.1 Date/time search Select the start date. Once the start date has been selected, the timeline will update to show the full 24 hour period. Use the Zoom In button to magnify the timeline. -
Page 40: Event Search
Digital Video Recorder 440/480 Series Operating instructions | en 5.7.2 Event search From a Date/Time search, press the exit key to select the Search Tabs. Press the left/right arrow keys to select Event Search. Press the enter key to activate the search. -
Page 41: Smart Search
| Operating instructions Digital Video Recorder 440/480 Series 5.7.3 Smart search From a Date/Time search, press the exit key to select the Search Tabs. Press the left/right arrow keys to select Smart Search. Press the enter key to activate the search. -
Page 42: Export
Digital Video Recorder 440/480 Series Operating instructions | en Export The export menu is accessed by pressing the Export key on the Front Panel or from the System Control Bar. It allows writing segments of recorded video and audio to a USB storage device. -
Page 43: System Information
| Operating instructions Digital Video Recorder 440/480 Series System information The System information screen is accessed from the System Control Bar by pressing the System Information icon. The System information menu contains: – Model Name – Serial Number –... - Page 44 Digital Video Recorder 440/480 Series Operating instructions | en Figure 5.12 System Control Bar - Video signals information The video information menu shows the video system that has been set and the inputs on which video signals have been detected.
- Page 45 The Disk info menu provides information on the size and usage data of the hard drives. Note: Only Bosch hard disks with a signature can be used. If the hard disk is not certified, it cannot be used for recording.
-
Page 46: Log
Digital Video Recorder 440/480 Series Operating instructions | en 5.10 The Log displays historic system events and is accessed from the System Control Bar by pressing the Log icon. Logbook filter From the Log display, make a selection of which system events to show. -
Page 47: Triggers And Alarms
| Operating instructions Digital Video Recorder 440/480 Series 5.11 Triggers and alarms Various types of events change the way the unit works. These events are: – an alarm input signal applied to the unit – motion detection in a camera signal –... -
Page 48: Motion Events
Digital Video Recorder 440/480 Series Operating instructions | en Acknowledging an input alarm Press the acknowledge key to acknowledge the alarm. – The beeper is silent. – The alarm indicators are no longer lit. – The alarm status message disappears. -
Page 49: Configuration Menu
| Configuration menu Digital Video Recorder 440/480 Series Configuration menu Access all the parameters that are used to configure the unit via the menu system. The large number of available parameters gives the opportunity to program extensive functionality. Administrator rights are required to access the configuration menus. - Page 50 Digital Video Recorder 440/480 Series Configuration menu | en Top tabs Submenus Camera Camera Video Adjustment Continuous Recording Input Recording Motion Recording Network Live Streaming Video Format Schedule Sunday Monday Tuesday Wednesday Thursday Friday Saturday Exception Days Display Language Monitor A...
-
Page 51: Camera
| Configuration menu Digital Video Recorder 440/480 Series Camera Use the Camera menu to configure the recording set up for each of the three profiles. Configure the settings for Continuous, Input, and Motion recording. – Continuous recording - the default recording mode –... -
Page 52: Maximum Frame Rates Dvr 440
Digital Video Recorder 440/480 Series Configuration menu | en 6.1.2 Maximum frame rates DVR 440 Channels Enabled 2CIF 4CIF 25/30 25/30 12.5/15 25/30 25/30 12.5/15 25/30 25/30 25/30 25/30 25/30 25/30 Table 6.2 Maximum Frame Rates (PAL/NTSC IPS) by Resolutions for enabled Channels 6.1.3... -
Page 53: Ptz
| Configuration menu Digital Video Recorder 440/480 Series 6.1.5 Figure 6.4 Camera - PTZ Select a COM Port, Control ID, and Protocol for PTZ when a controllable camera is connected. – Pan and Tilt can be tested within the menu. -
Page 54: Continuous Recording
Digital Video Recorder 440/480 Series Configuration menu | en 6.1.6 Continuous Recording Figure 6.5 Camera - Continuous Recording Continuous recording mode: – Resolution - set the video resolution to 4CIF (704x576/480 PAL/NTSC), 2CIF (704x288/ 240 PAL/NTSC), or CIF (352x288/240 PAL/NTSC). -
Page 55: Input Recording
| Configuration menu Digital Video Recorder 440/480 Series 6.1.7 Input Recording Figure 6.6 Camera - Input Recording Use the same procedure as in Continuous Recording. Pre-event Pre-event recording can be switched off or to a displayed pre-event recording time by input and motion recording. -
Page 56: Motion Recording
Digital Video Recorder 440/480 Series Configuration menu | en 6.1.8 Motion Recording Figure 6.7 Camera - Motion Recording Use the same procedure as in Input Recording. Bosch Security Systems Installation and Operation manual AM18-Q0605 | v2.0 | 2012.04... -
Page 57: Network Live Streaming
| Configuration menu Digital Video Recorder 440/480 Series 6.1.9 Network Live Streaming Figure 6.8 Camera - Network Live Streaming Use the same procedure as Continuous Recording to set the values for cameras that will be streamed over the network. -
Page 58: Video Format
Digital Video Recorder 440/480 Series Configuration menu | en Channels Enabled (8) 6.25/7.5 6.25/7.5 6.25/7.5 6.25/7.5 12.5/15 12.5/15 25/30 25/30 Table 6.5 Maximum Frame Rates (PAL/NTSC IPS) by Resolutions for enabled Channels (8) 6.1.10 Video format Figure 6.9 Camera - Video format Select the Video format, NTSC, PAL, or Auto detect, that the unit will operate with. -
Page 59: Schedule
| Configuration menu Digital Video Recorder 440/480 Series Schedule Setting the dynamic characteristics The settings in the Schedule menu provide the opportunity to tap the powerful functionality of the unit. By spending some time in planning and setting up the schedules, efficient use of resources is achieved while effectively covering most types of working situations. -
Page 60: Display
Digital Video Recorder 440/480 Series Configuration menu | en Move to the next chronological mode change and press the enter key to cycle to the next mode. – Use Day copy to copy the settings of the schedule to another day. -
Page 61: Event
| Configuration menu Digital Video Recorder 440/480 Series Event Use the Event menu to specify the desired behavior for an Input, detected Motion, or System failures; also define how alarms are acknowledged. 6.4.1 Input Figure 6.12 Event - Input Inputs are always active on the unit. -
Page 62: Motion
Digital Video Recorder 440/480 Series Configuration menu | en 6.4.2 Motion The motion detection feature can be configured by selecting the camera channel for each individual video input. Figure 6.13 Event - Motion Adjust the Sensitivity to set the theshold at which Motion is detected. - Page 63 | Configuration menu Digital Video Recorder 440/480 Series 6.4.3 Alarm acknowledge The alarm acknowledge feature can be configured for automatic or manual operation. Figure 6.14 Event - Alarm acknowledge Select the Post-event time to enable the unit to automatically acknowledge alarms when the post-event time is expired.
- Page 64 Digital Video Recorder 440/480 Series Configuration menu | en 6.4.4 System menu The relay outputs can be configured to react to system events. Figure 6.15 Event - System menu For each system event, select relay number 1 to activate an output relay when an events occurs, or select None for no activation.
-
Page 65: Network
| Configuration menu Digital Video Recorder 440/480 Series Network 6.5.1 TCP/IP Figure 6.16 Network - TCP/IP Enable DHCP to have the IP address, subnet mask, and default gateway assigned automatically by the network server. – If DHCP is disabled, fill in the IP address, the Subnet mask, the default Gateway, and the Primary DNS server address. -
Page 66: Connecting Using A Smart Mobile Phone
Digital Video Recorder 440/480 Series Configuration menu | en 6.5.3 Connecting using a smart mobile phone Your smart phone should support RTSP network protocol and includes a RTSP capable player application that can display H.264 video streams. The RTSP transports the remote (network) stream or the local recording stream if the remote stream is disabled. -
Page 67: Ddns
| Configuration menu Digital Video Recorder 440/480 Series 6.5.4 DDNS Figure 6.17 Network - DDNS Select a DDNS provider from the list and complete the details with the configuration information assigned by the provider. The providers supported are: dyndns.org, tzo.com, and sitessolutions.com. -
Page 68: Mail
Digital Video Recorder 440/480 Series Configuration menu | en 6.5.6 Mail Figure 6.19 Network - Mail Enable Send Mail to have an e-mail sent out from the system according to the settings in the Notification Menu. Use More E-mail Settings to set the From, Subject, and up to three recipients. -
Page 69: System
| Configuration menu Digital Video Recorder 440/480 Series System 6.6.1 Date/Time Figure 6.20 System -Date/Time Enter the actual Date. Fill in the actual Time. Select a Date format which shows either the month (MM), the day (DD), or the year (YYYY) first. -
Page 70: Users
Digital Video Recorder 440/480 Series Configuration menu | en 6.6.4 Users Figure 6.21 System -User General The system contains a permanent Admin account with Administrator permissions. This user is logged in by default, e.g. after powering up the unit. Admin Enter a Password that can be up to 12 characters. -
Page 71: Configuration
| Configuration menu Digital Video Recorder 440/480 Series 6.6.5 Configuration Figure 6.23 System - Configuration – Import configuration will load previously saved system settings from a USB memory device. – Export configuration saves a copy of the system settings to a USB memory device. -
Page 72: Hard Disk
Digital Video Recorder 440/480 Series Configuration menu | en 6.6.6 Hard Disk Figure 6.24 System - Hard disk The Hard Disk menu gives access to settings that affect video retention as well as a means to format the hard disk. -
Page 73: System
| Configuration menu Digital Video Recorder 440/480 Series 6.6.7 System Figure 6.25 System - System The System menu contains miscellaneous settings for the unit. – IR remote control allows for up to nine units to recieve commands from a single remote control without interfering with one another. -
Page 74: Web Client Software
Digital Video Recorder 440/480 Series Web Client Software | en Web Client Software The Web Client Software gives full remote control of the DVR 400 Series using a PC. Up to four remote users can access and control the unit. Remote live viewing, search, playback, and system configuration are provided. -
Page 75: How To Log On
| Web Client Software Digital Video Recorder 440/480 Series How to log on When establishing a new connection to the unit, the Log on window appears. Figure 7.1 Web Client - Log on window via a network Type the User ID and Password. -
Page 76: Introducing The Browser Window
Digital Video Recorder 440/480 Series Web Client Software | en Introducing the browser window The browser window has three main areas: – A mode bar across the top, with buttons for changing between live and playback, export, system settings, and buttons to toggle video between full screen, quad, or sequence. -
Page 77: Camera Views
| Web Client Software Digital Video Recorder 440/480 Series Click and hold the left and right arrows to pan. Release the mouse button to stop camera movement controls. Zoom, focus, and iris To control the zoom, focus, and iris of PTZ cameras: Select the cameo of the camera to be controlled. -
Page 78: Playback Mode
Digital Video Recorder 440/480 Series Web Client Software | en Playback mode Click the Playback button to show the playback window. On this screen, the user can: – jump to a specific date and time to view playback video; –... -
Page 79: Export Mode
| Web Client Software Digital Video Recorder 440/480 Series Export mode Click the Export button to show the export window. On this screen, the user can: – export a file remotely to the PC; – choose the channel, audio, start and end date/times to export. -
Page 80: Configuration Mode
Digital Video Recorder 440/480 Series Web Client Software | en Configuration mode Click the Configuration button to enter the Configuration menu. This allows set up of all the configuration settings for the unit. Figure 7.5 Web Client - Configuration Bosch Security Systems Installation and Operation manual AM18-Q0605 | v2.0 | 2012.04... -
Page 81: Archive Player
| Archive Player Digital Video Recorder 440/480 Series Archive Player Getting started The Divar Archive Player allows viewing archived video recordings on a PC that have been archived from the DVR or Web Client. It also provides the opportunity to check the authenticity of the archived video. -
Page 82: Introducing The Main Window
Digital Video Recorder 440/480 Series Archive Player | en Introducing the main window The main window appears upon selection of an archive file. The window is built up of three main areas: – A horizontal top bar containing buttons for screen control. -
Page 83: Viewing Images
| Archive Player Digital Video Recorder 440/480 Series Viewing Images 8.4.1 Assigning Cameos A cameo is a single camera picture in a multiscreen display. To assign a camera to a cameo: Click on a Cameo; – the selected cameo has a yellow border. -
Page 84: Capturing A Still Image
Digital Video Recorder 440/480 Series Archive Player | en 8.5.1 Capturing a still image Capture still images from the full screen display of a camera and save them to the PC hard disk in a bitmap format. To save an image from the active cameo to the PC hard disk: Click the Capture button;... -
Page 85: Menu Default Values
| Menu default values Digital Video Recorder 440/480 Series Menu default values The following tables list the items of the menu system of the unit. The Default value column shows the values that are restored when the factory defaults item of the System settings menu is selected. - Page 86 Digital Video Recorder 440/480 Series Menu default values | en Table 9.2 Configuration menu default values Navigation Setting Default value Reset Schedule Sunday Continous Monday Continous Tuesday Continous Wednesday Continous Thursday Continous Friday Continous Saturday Continous Exception Days None Display...
- Page 87 | Menu default values Digital Video Recorder 440/480 Series Table 9.2 Configuration menu default values Navigation Setting Default value Reset Network TCP/IP DHCP Enabled IP Address 0.0.0.0 Subnet Mask 0.0.0.0 Gateway 0.0.0.0 Primary DNS 0.0.0.0 Secondary DNS 0.0.0.0 HTTP Port No.
- Page 88 Digital Video Recorder 440/480 Series Menu default values | en Table 9.2 Configuration menu default values Navigation Setting Default value Reset System Date/Time Date 2010-01-01 Time 12:00:00 AM Date Format YYYY/MM/DD Time Format 12 hour Time Zone GMT+0 Daylight Savings...
-
Page 89: Technical Specifications
| Technical specifications Digital Video Recorder 440/480 Series Technical specifications 10.1 Electrical Voltage and Power External power adapter AC input 100-240 VAC; 50/60 Hz; 1.8 A External power adapter DC output 12 VDC; 3 A DVR power input 12 VDC; 3 A; 145 BTU/h... -
Page 90: Mechanical
Digital Video Recorder 440/480 Series Technical specifications | en RS485 Screw terminal output, cable cross section AWG 28-16 (0.08-1.5 mm2) Type A connector (2) USB 2.0 on front and rear for mouse and USB memory device Storage Hard Disks 1 SATA hard drive Record Rate (IPS) PAL: 25 total, configurable per camera: 25, 12.5,... -
Page 91: Electromagnetic And Safety
| Technical specifications Digital Video Recorder 440/480 Series 10.1.3 Electromagnetic and Safety EMC requirements FCC Part 15, Class B EMC directive2004/108/EC Immunity EN50130-4 Emission EN55022 Class B Harmonics EN61000-3-2 Voltage fluctuations EN61000-3-3 Safety UL60950-1 CE, EN60950-1 Canada CAN/CSA - C22.2 no. 60950-1... -
Page 92: A Appendix
– CDDL v1.0 — http://www.openssl.org/source/license.html Bosch is committed to comply with the relevant terms of any open source license included in its products. To this effect, Bosch has created a web site (www.boschsecurity.com/oss) to enable any licensee of open source software to have access to the relevant source code or other information that such licensee may be entitled to under the terms of a relevant license. -
Page 93: Warranties And Disclaimer Of Warranties
Bosch is entitled to charge fees for any services in relation thereto. - Page 95 Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2012...