Realignment - Kenwood TK-7189 Service Manual
Vhf fm transceiver, uhf fm transceiver
Hide thumbs
Also See for TK-7189:
- Instruction manual (196 pages) ,
- Service manual (91 pages) ,
- Manual de instrucciones (32 pages)
Advertisement
1. Modes
User mode
Panel test mode
PC mode
Firmware
programming mode
Transceiver information mode
Firmware version information
Clock adjustment mode
Mode
User mode
For normal use.
Panel test mode
Used by the dealer to check the funda-
mental characteristics.
Panel tuning mode
Used by the dealer to tune the transceiver.
PC mode
Used for communication between the
transceiver and PC (IBM compatible).
Data programming
Used to read and write frequency data
mode
and other features to and from the
transceiver.
PC test mode
Used to check the transceiver using the PC.
This feature is included in the FPU.
See panel test.
PC tuning mode
Used to tune the transceiver using the PC.
This feature is included in the FPU.
See panel tuning.
Firmware
Used when changing the main program
programming mode
of the flash memory.
Transceiver
Used to confirm the MPT ESN, firmware
information mode
version and transceiver serial number.
Firmware version
Used to confirm the internal firmware
information
version.
Clock adjustment
Used by the dealer to adjust date and
mode
time.
REALIGNMENT
Panel tuning mode
Data programming mode
PC tuning mode
PC test mode
Function
TK-7180/7189/7180H/8180/8189/8180H
2. How to Enter Each Mode
Mode
User mode
Panel test mode
PC mode
Panel tuning mode
Firmware programming mode
Transceiver information mode
Firmware version information
Clock adjustment mode
3. Panel Test Mode
Setting method refer to ADJUSTMENT.
4. Panel Tuning Mode
Setting method refer to ADJUSTMENT.
5. PC Mode
5-1. Preface
The transceiver is programmed by using a personal com-
puter, programming interface cable (KPG-46) and program-
ming software (KPG-96D).
The programming software can be used with an IBM PC
or compatible. Figure 1 shows the setup of an IBM PC for
programming.
IBM PC
KPG-96D
Fig. 1
Operation
Power ON
[A] + Power ON
Received commands from PC
[Panel test mode] + [S]
[S] + Power ON
[B] + Power ON
[
] + Power ON
[C] + Power ON
KPG-46 or
KPG-46 +
Tuning cable
(E30-3383-05)
3
Advertisement
