Table of Contents
Advertisement
Pilot Control Shut-Off Lever
Pilot control shut-off lever (1) functions to prevent the
machine from being mistakenly operated when the operator
accidentally touches the control lever or pedals when getting
on or off the machine.
d
WARNING:
Always pull pilot control shut-off lever (1) into the
full LOCK position. Unless pilot control shut-off lever
(1) is fully moved to the LOCK position, the control
lever is not locked, possibly creating a hazardous
situation.
When leaving the machine, always stop the engine.
Then, pull pilot control shut-off lever (1) up to the
LOCK position.
Always pull pilot control shut-off lever (1) up to the
LOCK position before transporting the machine and
leaving the machine.
Confirm that pilot control shut-off lever (1) is in the
LOCK position before starting the engine. The engine
will not start in any position other than the LOCK
position.
Engine Stop Switch
In case the engine does not stop even if the key switch is
turned OFF due to failure of the machine, move switch (2)
located at the front-left side of the seat stand downward to
stop the engine.
After operating switch (2), be sure to return switch (2) back to
the upward position.
OPERATOR'S STATION
1-105
1
LOCK position
1
UNLOCK Position
2
MDAA-01-295
MDAA-01-296
MDAA-01-290
Advertisement
Table of Contents
Troubleshooting
