English 18V CORDLESS IMPACT WRENCH DCF900 Congratulations! hands warm (relevant for vibration), organisation of work patterns. You have chosen a D WALT tool. Years of experience, thorough EC‑Declaration of Conformity product development and innovation make D WALT one of the most reliable partners for professional power tool users. Machinery Directive Technical Data DCF900...
English d ) Do not abuse the cord. Never use the cord for c ) Disconnect the plug from the power source and/ carrying, pulling or unplugging the power tool. Keep or remove the battery pack, if detachable, from cord away from heat, oil, sharp edges or moving the power tool before making any adjustments, parts.
Page 8
English improperly or at temperatures outside the specified range power input of your charger (see Technical Data). The minimum may damage the battery and increase the risk of fire. conductor size is 1 mm ; the maximum length is 30 m. 6) Service When using a cable reel, always unwind the cable completely. a ) Have your power tool serviced by a qualified repair Important Safety Instructions for All Battery Chargers person using only identical replacement parts.
English • Do not operate charger if it has received a sharp blow, charging until the battery pack has reached an appropriate been dropped, or otherwise damaged in any way. Take it temperature. The charger then automatically switches to the pack to an authorised service centre.
English charger as battery pack may rupture causing serious Goods; International Air Transport Association (IATA) Dangerous personal injury. Goods Regulations, International Maritime Dangerous Goods (IMDG) Regulations, and the European Agreement Concerning • Charge the battery packs only in D WALT chargers. The International Carriage of Dangerous Goods by Road •...
English battery performance and life, store battery packs at room DCB547G, DCB548, DCBP034. Refer to Technical Data for temperature when not in use. more information. 2. For long storage, it is recommended to store a fully charged Package Contents battery pack in a cool, dry place out of the charger for The package contains: optimal results.
English Battery pack illuminate designating the level of charge left. When the level of charge in the battery is below the usable limit, the fuel gauge Worklight will not illuminate and the battery will need to be recharged. Mode selector nOTE: The fuel gauge is only an indication of the charge left on Main handle the battery pack.
English greater control and reducing the chance of overtightening or 1. Place the accessory on the fastener head. Keep the tool damaging material. pointed straight at the fastener. When set in reverse, the tool will impact at a normal speed and 2. Press variable speed trigger switch to start operation.
English Optional Accessories WARNING: Since accessories, other than those offered by D WALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only D WALT recommended accessories should be used with this product.
Page 16
Belgique et WALT ‑ Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be luxembourg België en luxemburg enduser.BE@sBDinc.com Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)