Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG IKE63471FB
Summary of Contents for AEG IKE63471FB
- Page 1 EN User Manual | Hob IKE63471FB aeg.com\register...
-
Page 2: Table Of Contents
Products must be used, installed and operated in accordance with this manual. You may not be able to claim on the AEG manufacturer’s warranty in the event that your product fault is due to failure to adhere to this manual. - Page 3 1.1 Children and vulnerable people safety • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- Page 4 • Smoke is an indication of overheating. Never use water to extinguish the cooking fire. Switch off the appliance and cover flames with e.g. a fire blanket or lid. • WARNING: The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.
-
Page 5: Safety Instructions
2. SAFETY INSTRUCTIONS 2.1 Installation • The appliance must be earthed. • Before carrying out any operation make sure that the appliance is disconnected WARNING! from the power supply. Only a qualified person must install this • Make sure that the parameters on the appliance. - Page 6 2.3 Use • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. WARNING! WARNING! Risk of injury, burns and electric shock. Risk of damage to the appliance. • Do not change the specification of this appliance.
-
Page 7: Installation
2.6 Disposal • Disconnect the appliance from the mains supply. • Cut off the mains electrical cable close to WARNING! the appliance and dispose of it. Risk of injury or suffocation. • Contact your local authority for information on how to dispose of the appliance. 3. -
Page 8: Product Description
min. 28 mm min. 60mm If the appliance is installed above a min. drawer, the hob ventilation can warm up 12 mm the items stored in the drawer during the cooking process. 4. PRODUCT DESCRIPTION 4.1 Cooking surface layout Induction cooking zone Control panel Flexible induction cooking area consisting of four sections... - Page 9 4.2 Control panel layout 1 2 3 4 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor Function Comment field ON / OFF To activate and deactivate the hob. Lock / Child Safety Device To lock / unlock the control panel.
-
Page 10: Daily Use
Display Description Automatic Heat Up operates. PowerBoost operates. There is a malfunction. + digit OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / resid‐ ual heat. Lock / Child Safety Device operates. Incorrect or too small cookware or no cookware on the cooking zone. Automatic Switch Off operates. - Page 11 5.6 PowerBoost Heat setting The hob deactivates This function makes more power available to after the induction cooking zones. The function can be activated for the induction cooking zone 6 hours , 1 - 3 only for a limited period of time. After this time the induction cooking zone automatically sets 4 - 7 5 hours...
- Page 12 CountUp Timer (The count up timer) You can use this function to monitor how long the cooking zone operates. When you deactivate the hob, you also deactivate this function. To set the cooking zone: touch again and again until the indicator of a necessary 5.9 Child Safety Device cooking zone comes on.
- Page 13 • Each phase has a maximum electricity Automatic modes loading of 3700 W. • The function divides the power between Automat‐ Boiling 1) Frying 2) cooking zones connected to the same ic light phase. Mode H0 • The function activates when the total electricity loading of the cooking zones Mode H1 connected to a single phase exceeds...
-
Page 14: Flexible Induction Cooking Area
Operating the fan speed manually Activating the light You can also operate the function manually. You can set the hob to activate the light automatically whenever you activate the hob. To do that touch when the hob is active. To do so set the automatic mode to H1 – H6. This deactivates automatic operation of the function and allows you to change the fan speed manually. - Page 15 Incorrect cookware position: 100-160mm Place the cookware with the bottom diameter larger then 160 mm centrally between two sections. 6.3 FlexiBridge Big Bridge mode To activate the mode press until you see the correct mode indicator . This mode connects three rear sections into one cooking zone.
- Page 16 Incorrect cookware position: Incorrect cookware position: 6.4 FlexiBridge Max Bridge mode To activate the mode press until you see the correct mode indicator . This mode connects all sections into one cooking zone. PowerSlide function To set the heat setting use any of the two This function allows you to adjust the control bars on the left side.
-
Page 17: Hints And Tips
General information: • 160 mm is the minimum bottom diameter of the cookware for this function. You can change the heat settings for each • Heat setting display for the left rear control position separately. The hob will bar shows the position of the cookware on remember your heat settings next time you activate the function. - Page 18 • water boils very quickly on a zone set to made of different materials (sandwich the highest heat setting. construction). • a magnet pulls on to the bottom of the • humming: you use high power level. cookware. • clicking: electric switching occurs. •...
-
Page 19: Care And Cleaning
See the work with this function refer to our consumer picture. website. The AEG cooker hoods that work The hood in the picture is only exemplary. with this function must have the symbol 8. CARE AND CLEANING •... -
Page 20: Troubleshooting
the hob. Take care to avoid burns. Use a special hob scraper on the glass surface at an acute angle and move the blade on The printing on the flexible induction the surface. cooking area may become dirty or • Remove when the hob is sufficiently change its colour from sliding the cool: limescale rings, water rings, fat cookware. - Page 21 Problem Possible cause Remedy Automatic Heat Up does not oper‐ The zone is hot. Let the zone become sufficiently ate. cool. The highest heat setting is set. The highest heat setting has the same power as the function. The heat setting changes between Power management operates.
-
Page 22: Technical Data
10. TECHNICAL DATA 10.1 Rating plate Model IKE63471FB PNC 949 597 421 00 Typ 62 B3A 05 AA 220 - 240 V / 400 V 2N 50 - 60 Hz Induction 7.35 kW Made in Germany Ser.Nr. -
Page 23: Warranty - Australia And New Zealand
3. Warranty Period: Subject to these terms serviced centres; and conditions, this warranty continues d) ‘AEG’ is the brand controlled by for in Australia for a period of 60 months Electrolux Home Products Pty Ltd of and in New Zealand for a period of 60 163 O’Riordan Street, Mascot NSW... - Page 24 months, following the date of original – failure to comply with any purchase of the Appliance. additional instructions supplied 4. Repair or replace warranty: During the with the Appliance; Warranty Period, Electrolux or its ASC In addition, Electrolux is not liable will, at no extra charge if your Appliance under this warranty if: is readily accessible for service, without...
-
Page 25: Environmental Concerns
Important Notice Before calling for service, please ensure that the steps listed in clause 8 above have been followed. SERVICE AUSTRALIA aeg.com/au FOR SERVICE FOR SPARE PARTS or to find the address of your nearest authorised serv‐... - Page 28 867358222-D-312023...