hit counter script
Sanyo PLC-XF70 Owner's Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Projector
  5. PLC-XF70
  6. Owner's manual
Sanyo PLC-XF70 Owner's Manual

Sanyo PLC-XF70 Owner's Manual

Sanyo plc-xf70: user guide
Hide thumbs Also See for PLC-XF70:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual
Multimedia Projector
PLC-XF70
MODEL
Projection lens is optional.
✽
Owner's Manual

Advertisement

Table of Contents
loading

Related Manuals for Sanyo PLC-XF70

Summary of Contents for Sanyo PLC-XF70

  • Page 1 Multimedia Projector PLC-XF70 MODEL Projection lens is optional. ✽ Owner’s Manual...

  • Page 2: Features And Design

    This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology. Functionally Rich ◆ This projector has many useful functions such...

  • Page 3: Table Of Contents

    Safety Instructions . . . . . . . . . . . . . . . . . 5 Air Circulation Installing the Projector in Proper Directions Moving the Projector Compliance .

  • Page 4: To The Owner

    This symbol and recycle system are applied only to EU countries and not applied to the countries in the other area of the world. Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused.

  • Page 5: Safety Instructions

    The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.

  • Page 6: Air Circulation

    – Do not put any flammable object or spray can near the projector, hot air is exhausted from the air vents. – Keep the exhaust vent at least 3’ (1 m) away from any objects.

  • Page 7: Installing The Projector In Proper Directions

    Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane.

  • Page 8: Moving The Projector

    – Do not put the projector in a case before it is cooled enough. – Do not transport the projector with a replacement lens installed.

  • Page 9: Compliance

    This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Power Cord for the United States and Canada: AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).

  • Page 10: Part Names And Functions

    !2 Main On/Off Switch !3 Power Cord Connector !4 Air Intake Vent !5 Air Filter ✽Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector. * Kensington is a registered trademark of ACCO Brands Corporation.

  • Page 11: Terminals And Connectors

    Terminals and Connectors q SERIAL PORT IN TERMINAL If you control the projector by computer, you must connect a cable (not supplied) from your computer to this terminal. w SERIAL PORT OUT TERMINAL This terminal outputs signal from SERIAL PORT IN.

  • Page 12: Side Control And Indicators

    Part Names and Functions Side Control and Indicators INDICATORS Side Controls ON/STAND-By button Turn the projector on or off. (pp.23,24) ZOOM button Zoom in and out the images. (p.27) MENU button Open or close the On-Screen MENU. (pp.25, 26) POINT buttons - Select an item or adjust the value in the On- Screen MENU.

  • Page 13: Indicators

    Indicators Part Names and Functions q LAMP Indicator This indicator is dim when the projector is turned on. And bright when the projector is in stand-by mode. (pp.72-74) w READy indicator This indicator lights green when the projector is ready to be turned on. And it flashes green in Power Management mode.

  • Page 14: Remote Control

    • For cleaning, use a soft dry cloth. Do not apply benzene, thinner, splay, or any other chemical materials. q ON/STAND-By button Turn the projector on or off. (pp.23-24) w AUTO PC button Automatically adjust the computer image to its optimum setting (pp.29, 35).

  • Page 15: Remote Control Battery Installation

    The remote control can be used as a wired remote control. Wired remote control helps you use the remote control outside of the operating range (16.4’/ 5 m). Connect the remote control and the projector with the remote control cable (sold separately).

  • Page 16: Remote Control Code

    Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 52.

  • Page 17: Installation

    - When setting the projector after lens installation, be sure to replace a Lens Cap to protect a surface. - When carrying or holding up the projector, be careful not to put your hands on lens part. It may damage lens, cabinet, or mechanical parts.

  • Page 18: Lens Shift Adjustment

    . To raise the projector, rotate the feet clockwise. To lower the projector or to retract the adjustable feet, rotate the feet counterclockwise. To correct keystone distortion, press the KEYSTONE button on the remote control or select Keystone from the menu (see pages 14, 30, 40, 44).

  • Page 19: Terminals Of Projector

    Terminals of Projector The projector has two replaceable Interface board slots. The projector's functions can be extended by installing the optional interface boards into the terminal slots. 2 vacant slots (Input 3 and 4) are provided in your purchasing the projector. For the Optional Interface Boards, contact sales dealer where you purchased the projector.

  • Page 20: Connecting To Computer

    Cables used for connection • VGA Cable (D-sub 15 pin) * • DVI Cable • BNC Cable (BNC x 5) ( *One cable is supplied; Other cables are not supplied with this projector.) Laptop type Monitor Output DVI Cable DIGITAL...

  • Page 21: Connecting To Video Equipment

    Cables used for connection • Video Cable (BNC x 3, BNC x 1) • SCART-VGA Cable • DVI Cable • S-Video Cable ( Cables are not supplied with the projector.) Video Source (example) Video Cassette Recorder Digital Output RGB SCART...

  • Page 22: Connecting The Ac Power Cord

    NOTE ON THE POWER CORD AC power cord must meet the requirements of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If the supplied AC power cord does not match your AC outlet, contact your sales dealer.

  • Page 23: Basic Operation

    After the countdown, the input source that was selected the last time and the Lamp mode icon (see page 60) appear on the screen. If the projector is locked with a PIN code, PIN code Input Dialog Box will appear. Enter the PIN code as instructed below.

  • Page 24: Turning Off The Projector

    IN EVERY 24 HOURS. ✔ Note: • When the On start function is set to “On, ” the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.53). • The running speed of cooling fans is changed according to the temperature inside the projector.

  • Page 25: How To Operate The On-Screen Menu

    How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. Press the MENU button on the side control or the remote control to display the On-Screen Menu.

  • Page 26: Menu Bar

    Screen Menu Used to adjust the size of the image. [Normal/True/Wide/ Full screen/Custom/Keystone/Ceiling/Rear/Reset/Digital zoom +/–] (pp.39-40). Setting Menu Used to set the projector’s operating configurations (pp. 48-56). Information Menu Display the input source information(p. 28). Image Adjust Menu Used to adjust the picture image. [Contrast/Brightness/ Color/Tint/Color management/ Auto picture control/Color temp./White balance (R/G/B)/ Offset (R/G/B)/Sharpness/...

  • Page 27: Operating With Projector Control

    Shutter function allows you to completely block out light to the screen. Press the SHUTTER button to close the shutter inside the projector. To open up the shutter, press the SHUTTER button again. Refer to p.55 for detail of setting for the Shutter function.

  • Page 28: Information Menu

    Basic Operation Information Information Menu Information display can be used to confirm the current operating condition of the projector and the signal being projected through the projector. Information Menu Press the INFORMATION button to display the information window on the screen. To hide the...

  • Page 29: Operating With Remote Control

    Operating with Remote Control Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. AUTO PC button Press the AUTO PC button on the remote control to operate the Auto PC Adj.

  • Page 30: Keystone Button

    Basic Operation SHUTTER button See page 27 for details. FILTER button Press and hold the FILTER button for more than five seconds to replace the filter mechanically. ✔ Note: • The filter cannot be rewound. • When the filter is replaced, the total accumulated time of the filter use is automatically set to 0.

  • Page 31: Input Selection

    Input Side Control Side Control Operation Press the INPUT button on the side control. It switches to INPUT 1, INPUT 2, INPUT 3 and INPUT 4 as you press the INPUT button. Before using the INPUT button on the side control, you must select a correct input source by On-Screen Menu and the latest input source will be displayed.

  • Page 32: Computer Input Source Selection

    Input Selection Computer Input Source Selection Menu Operation When Selecting the INPUT 1 with DVI/D-sub 15 terminals Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the INPUT Menu icon. Use the Point ed buttons to move the red arrow pointer to the desired input and then press the SELECT button.

  • Page 33: Video Input Source Selection

    The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP . • When a slot is empty, the input is displayed in grayout.

  • Page 34: Computer Input

    WXGA, or UXGA (refer to “Compatible Computer Specifications” on pages 75-76). If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Some computers need to be set manually.)

  • Page 35: Auto Pc Adjustment

    To store the adjusted parameters . The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting Mode in PC SYSTEM Menu (p.34). See MANUAL PC ADJUSTMENT on pages 36-37 .

  • Page 36: Manual Pc Adjustment

    Computer Input Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.
  • Page 37 Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. Mode free To clear the adjusted data, select Mode free and then press the SELECT button.

  • Page 38: Image Level Selection

    Use the Point ed buttons to move the red frame pointer to the desired image level and then press the SELECT button. Standard Normal picture level preset on the projector. Real Picture level with improved halftone for graphics. IMAGE 1–10 User preset picture adjustment in the Image Adjust Menu.

  • Page 39: Screen Size Adjustment

    True Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point ed7 8 buttons to pan the image. When adjusted, the arrows will turn red.
  • Page 40 When this function is set to “On, ” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to “On, ” the picture is left/right reversed.

  • Page 41: Video Input

    When the Video System is 1035i or 1080i, select the system manually. COMPONENT VIDEO SIGNAL FORMAT If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.

  • Page 42: Image Level Selection

    Use the Point ed buttons to move the red frame pointer to the desired image level and then press the SELECT button. Standard Normal picture level preset on the projector. Cinema Picture level adjusted with fine tone. IMAGE 1–10 User preset picture adjustment in the Image Adjust Menu.

  • Page 43: Screen Size Adjustment

    Screen Size Adjustment Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. Use the Point ed buttons to move the red frame pointer to the desired function and then press the SELECT button.
  • Page 44 When this function is set to “On, ” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to “On, ” the picture is left/right reversed.

  • Page 45: Picture Image

    Image Adjustment Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box.
  • Page 46 Picture Image COLOR SELECTION MODE (continued) COLOR M . Return to the COLOR MANAGEMENT POINTER. (If you press the MENU button on the side control or the remote control, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color.) MENU Return to the IMAGE ADJUST Menu.
  • Page 47 Off ..Progressive scan mode is “Off. ” On ..Progressive scan mode is “On. ” Film . . . For watching a film. With this function, the projector reproduces pictures faithful to the original film quality.

  • Page 48: Setting

    Setting This projector has a Setting menu that allows you to set up other various functions. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon.
  • Page 49 After capturing the projected image, go to the Logo select function and set it to “User” . Then the captured image will be displayed the next time you turn on the projector. To cancel the Capture function, select [No]. ✔...
  • Page 50 Setting Logo PIN code lock This function prevents an unauthorized person from changing the screen logo. Off ..The screen logo can be changed freely from the Logo Menu. On ..The screen logo cannot be changed without a Logo PIN code.
  • Page 51 Lamp mode This Projector is equipped with 2 Projection Lamps and the number of using lamps can be switched to 2 lamps or 1 lamp. Using 1 lamp maintains the life of Projection Lamps. To change over Lamp Mode Set "2 lamps mode" or "1 lamp mode" by pressing the Point buttons.
  • Page 52 (Code 1) and the other seven codes (Code 2 to Code 8). The same code should be set on both the projector and the remote control. For example, operating the projector in “Code 7”...
  • Page 53 • Make sure that the MAIN ON / OFF switch is ON, otherwise the On start function does not work. • Be sure to turn off the projector properly (see “Turning Off the Projector” on page 24). If the projector is turned off in the incorrect sequence, the On start function does not work properly.
  • Page 54 RS-232C terminal (serial port) of the projector. Use the Point buttons to adjust the Projector ID. Projector ID ... 1 - 999. (Factory default setting : Projector ID ● Enter a PIN code After a correct Logo PIN code is entered, the following dialog box appears.
  • Page 55 Management The Shutter Management function turns off the projection lamp when the projector is left with the shutter closed and the set time has passed away. The count-down time can be set between 5 and 180 minutes. When the count-down time has elapsed, the shutter will be opened up automatically and the lamp will be turned off to cool itself down.
  • Page 56 (Fig. 1) appears on the screen and the total accumulated time turns red, indicating that the filter replacement is necessary. If the filter is out of scroll and the projector reaches a time set in the timer setting, Fig. 2 appears on the screen, indicating that the filter cartridge replacement is necessary.

  • Page 57: Maintenance And Care

    This projector has an electrically operated filter which helps you to replace the filter easily. The projector monitors the condition of the filter at all time and replaces a filter with a new one automatically when it detects the clogging.

  • Page 58: Replacing The Filter Cartridge

    Turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet. First, clean up the dust on the projector and around the air vents. Slide and open the Filter cover. (See the right figure.) Pull out the filter cartridge by holding the finger grip.

  • Page 59: Resetting The Filter Counter

    Resetting the Filter Counter Be sure to reset the Filter counter after replacing the filter cartridge. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. Use the Point ed buttons to move the red frame pointer to Filter counter and then press the SELECT button.

  • Page 60: Lamp Management

    The Lamp Management Function automatically changes the lighting lamp (Lamp Mode) by detecting the status of lamp. When either of the 2 lamps is out, the projector operates with 1 lamp. The Lamp Mode can be switched to 2 lamps or 1 lamp manually.

  • Page 61: Lamp Replacement

    Lamp Replacement When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP 1/2 REPLACE indicator lights orange. Replace the lamp with a new one promptly. The timing when the LAMP 1/2 REPLACE indicators should light is depending on the lamp mode.

  • Page 62: Resetting The Lamp Counter

    Replacement Lamp Type No . ● Lamp counter Select a lamp and the “Lamp replacement counter Reset?” appears. Select [Yes], then another confirmation box appears. PLC-XF70 POA-LMP104 (Service Parts No. 610 337 0262) Select [Yes] again to reset the lamp counter.

  • Page 63: Lamp Handling Precautions

    Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service.

  • Page 64: Cleaning The Projection Lens

    Maintenance and Care Cleaning the Projection Lens Turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet before cleaning. Gently wipe the projection lens with a cleaning cloth that...

  • Page 65: Warning Indicators

    Warning Indicators The WARNING indicators show the state of the function which protects the projector. Check the state of the WARNING TEMP . indicator and the LAMP indicator to take proper maintenance. The projector is shut down and the WARNING TEMP.

  • Page 66: Appendix

    A problem may be noticed with your graphics controller rather than with the projector. (When you reconnect the projector, be sure to turn the computer and monitor off before you turn on the projector. Turn on equipment in the order of the projector and computer.) 6.
  • Page 67 – Adjust the focus of the projector. – Check Projection Lens to see if it needs cleaning. Note: Moving the projector from a cool temperature location to a warm temperature ✔ The image is out of focus.
  • Page 68 Security PIN code. WARNING: High voltages are used to operate this projector . Do not attempt to open the cabinet . If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service.

  • Page 69: Menu Tree

    Y, Pb/Cb,Pr/Cr Go to System Video Go to System S-video Go to System Image Adjust Image Adjust Remote Control Projector 5 - 180 Min Key lock PIN code lock Displayed in grayout in the computer Input. ✽ Appendix Contrast 0–63 Brightness 0–63...
  • Page 70 Appendix Computer Input System ✽ System displayed in the System Menu varies depending on the input signal. PC Adjust Auto PC adj. Fine sync. Total dots Position H Position V Current mode Clamp Display area - H Display area - V Reset Mode free Store...
  • Page 71 Display Background Logo Lamp mode Lamp control Filter control Fan control Remote Control RC sensor Power management On start Security Projector ID 1–999 Shutter Protection Management Quit Lamp counter Hour(s) Filter counter Test pattern Factory default Quit 12 languages provided.

  • Page 72: Indicators And Projector Condition

    SHUTTER FILTER REP . blue orange orange The projector is off. (The main On/Off switch is OFF position or the AC power cord is unplugged.) The projector is in stand-by mode. Press the ON/ ✽ ✽ ✽ STAND-BY button to turn on the projector.
  • Page 73 READY indicator ✽ ✽ lights green and the projector can be turned on. (The WARNING TEMP . indicator keeps blinking.) Check and replace the filter. The projector has been cooled down enough and the temperature returns to normal.
  • Page 74 The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center. Do not leave the projector on.

  • Page 75: Compatible Computer Specifications

    Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 230 MHz of Dot Clock. PC Adjustment can be limited when these modes are selected. ON-SCREEN RESOLUTION H-Freq .(kHz) V-Freq .(Hz)
  • Page 76 Appendix When an input signal is digital from the DVI terminal, refer to the chart below. ON-SCREEN RESOLUTION H-Freq .(kHz) V-Freq .(Hz) DISPLAy D-VGA 640x480 D-480p 720x480 D-575p 720x575 D-SVGA 800x600 D-XGA 1024x768 D-WXGA 1 1366x768 D-WXGA 2 1360x768 D-WXGA 3 1376x768 D-WXGA 4 1360x768...

  • Page 77: Technical Specifications

    Technical Specifications Mechanical Information Projector Type Dimensions (W x H x D) Net Weight Feet Adjustment Panel Resolution LCD Panel System Panel Resolution Number of Pixels Signal Compatibility Color System High Definition TV Signal Scanning Frequency Optical Information Projection Lamp...

  • Page 78: Optional Parts

    (0.01% or less) may be ineffective by the characteristics of the LCD panels. ● Each projector has its own characteristics. When projecting with several projectors on the same screen or side by side, you may recognize different white balance and color uniformity on each projector.

  • Page 79: Configurations Of Terminals

    Configurations of Terminals ANALOG (Mini D-sub 15 pin) DIGITAL DVI-D (DVI 4 PIN) USB CONNECTOR (Series B) CONTROL PORT CONNECTOR (D-sub 9 pin) +5V Power Red Input Green Input Ground (Vert. sync.) Blue Input Ground DDC Data No Connect Ground (Horiz.sync.) Horiz.

  • Page 80: Pin Code Number Memo

    PIN Code Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No.

  • Page 81: Dimensions

    Appendix Dimensions Unit: inch (mm) Screw Holes for Ceiling Mount Screw: M8 Depth: 0.393 (10.0) 20.87(530) 8.66(220) 8.46(215) 1.18(30) 200.0 234.0 20.65(524.5) 1.14(29) 9.25(235) 9.25(235)

  • Page 82: Serial Control Interface

    Appendix Serial Control Interface This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port. Operation Connect a RS-232C serial cross cable to SERIAL PORT IN on the projector and serial port on the PC.

  • Page 83: Status Read Command

    'Character string' with the format below; Command Function Status Read Temperature Read The tables on page 82 and 83 show the typical command lists for controlling the projector. Please consult your local dealer for further information of other commands. Projector Projector status Return...
  • Page 84 SANyO Electric Co ., Ltd . KS3A...

Table of Contents