Table of Contents
Advertisement
CONNECTION
REMOTE CONTROLLER CIRCUIT CONNECTIONS
Use the layout below to make a remote controller and make the connections to the remote input pins (RC, C) of the
CONTROL terminal as indicated. This will permit remote controlled operation of this unit. (make contact LOW input)
CONTROL
RC C SW C AL C 1 2 3 4 5 6 7 8
RS232C
INSTALLING THE RACK MOUNTING BRACKETS (SOLD SEPARATELY)
To mount this unit onto a rack, please use the rack mount hardware (model VA-RACMK 1) sold separately.
1
Insert the head of two of the supplied bolts into the
keyhole opening on the side of the unit.
Insert the head of the bolt in the larger side, then slide it to
the smaller side of the opening.
2
Align the slot on the mounting bracket with the two
bolts.
Make sure the bolts have not moved from their position,
then place a flat washer, a locking washer, and fix with a
nut.
NOTE:
Make sure to use the bolts provided with this unit, as the
bolts provided with the rack mount hardware are too short.
3
Install the second mounting bracket on the opposite
side, then attach the unit onto the rack using the rack
mount bolts.
220
SW 1: Camera 1
220
SW 2: Camera 2
300
SW 3: Camera 3
360
SW 4: Camera 4
470
SW 5: Camera 5
680
SW 6: Camera 6
820
SW 7: Camera 7
1.2k
SW 8: Camera 8
SW: switch
1
2
3
6
1.8k
SW 9
: Still image
2.2k
SW 10
: Zoom
3.3k
SW 11
: Camera sequential
display
4.7k
SW 12
: Quad screen
7.5k
SW 13
: VCR playback
13k
SW 14
: Live picture
27k
SW 15
: Menu selection
English
Advertisement
Table of Contents
