Table of Contents
Advertisement
Figure 11. Remove four screws and then separate the HDD bracket and the HDD
Screw specifications
M3 x L3
Go to
https://support.lenovo.com/partslookup
replacement parts:
HDD
HDD cable
HDD bracket
Remove the memory module
Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 30
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove the memory shielding.
Figure 12. Remove the memory shielding
Step 3.
Open the buckles and then remove the memory.
Number of screws
4
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
35
Advertisement
Chapters
Table of Contents
