1
GETTING STARTED
This chapter provides basic information for using the copier.
INTRODUCTION
This copier has been designed to provide intuitive operating ease while requiring a minimum
amount of space. To get full use of all copier features, be sure to familiarize yourself with this
manual and the copier.
For quick reference during copier use, keep this manual in a handy location.
The AL-1041 can be used as a laser printer. The AL-1200 can also be used as
a laser printer if an optional printer upgrade kit is installed. This manual describes
only the copier features. For description of the printer features, see the printer
manual.
Conventions used in this manual
In this manual, the following icons are used to provide the user with information pertinent to the
use of the copier.
Warns the user that injury to the user or damage to the copier may result if the
contents of the warning are not properly followed.
Cautions the user that damage to the copier or one of its components may
result if the contents of the caution are not properly followed.
Notes provide information relevant to the copier regarding specifications,
functions, performance, operation and such, that may be useful to the user.
Indicates a letter displayed in the display.
CAUTIONS
Follow the cautions below when using this copier.
Place the copier on a firm, level surface.
Do not install the copier in a humid or dusty location.
When the copier is not used for long time, for example for consecutive holidays,
turn the power switch off and remove the power cord from the outlet.
The fusing area is hot. Exercise care in this area when removing misfed
paper.
When moving the copier, be sure to turn the power switch off and remove the
power cord from the outlet.
Do not look directly at the light source. Doing so may damage your eyes.
Do not cover the copier with a dust cover, cloth or plastic film while the power
is on. Doing so may prevent heat radiation, damaging the copier.
1
3