hit counter script
Asus RS700-E8-RS4 V2 User Manual
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Server
  5. RS700-E8-RS4 V2
  6. User manual
Asus RS700-E8-RS4 V2 User Manual

Asus RS700-E8-RS4 V2 User Manual

1u rackmount server
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
RS700-E8-RS4 V2
1U Rackmount Server
User Guide

Advertisement

Table of Contents
loading

Related Manuals for Asus RS700-E8-RS4 V2

Summary of Contents for Asus RS700-E8-RS4 V2

  • Page 1 RS700-E8-RS4 V2 1U Rackmount Server User Guide...
  • Page 2 ASUSTeK COMPUTER INC. (“ASUS”). ASUS provides this manual “as is” without warranty of any kind, either express or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no...

  • Page 3: Table Of Contents

    Expansion slot ..................2-16 2.5.1 Installing an expansion card to the PCIE1 slot......2-16 2.5.2 Installing an ASUS PIKE II card to the PCIE2 slot ....2-17 2.5.3 Configuring an expansion card ..........2-23 2.5.4 Installing Mezzanine cards ............2-24 2.5.5...
  • Page 4 Internal connectors .................. 4-10 Internal LEDs .................... 4-19 Chapter 5: BIOS Setup Managing and updating your BIOS ............5-2 5.1.1 ASUS CrashFree BIOS 3 utility........... 5-2 5.1.2 ASUS EZ Flash Utility ..............5-3 5.1.3 BUPDATER utility ............... 5-4 BIOS setup program .................. 5-6 5.2.1...
  • Page 5 Contents Advanced menu ..................5-10 5.4.1 ACPI Settings ................5-11 5.4.2 Smart Settings................5-11 5.4.3 NCT6779D Super IO Configuration .......... 5-12 5.4.4 Onboard LAN I350 IO Configuration ........5-13 5.4.5 Serial Port Console Redirection ..........5-14 5.4.6 APM ..................5-17 5.4.7 Advanced Power Management Configuration......
  • Page 6 Contents Chapter 6: RAID Configuration Setting up RAID ..................6-2 6.1.1 RAID definitions ................6-2 6.1.2 Installing hard disk drives ............6-3 6.1.3 Setting the RAID item in BIOS ............ 6-3 6.1.4 RAID configuration utilities ............6-3 LSI Software RAID Configuration Utility ..........6-4 6.2.1 Creating a RAID set ..............
  • Page 7 X540-BT2 Gigabit Adapters driver ............7-19 VGA driver installation ................7-22 ® Intel Rapid Storage Technology enterprise 4.0 installation ....7-24 Appendix Z10PP-D24 block diagram ..................A-2 Notices ........................A-3 REACH ....................A-4 ASUS Recycling/Takeback Services ............A-4 Australia statement notice ................A-4 ASUS contact information ..................A-5...

  • Page 8: Safety Information

    Safety information Electrical Safety • Before installing or removing signal cables, ensure that the power cables for the system unit and all attached devices are unplugged. • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
  • Page 9 Lithium-Ion Battery Warning CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Heavy System CAUTION! This server system is heavy. Ask for assistance when moving or carrying the system.

  • Page 10: About This Guide

    About this guide Audience This user guide is intended for system integrators, and experienced users with at least basic knowledge of configuring a server. Contents This guide contains the following parts: Chapter 1: Product Introduction This chapter describes the general features of the server, including sections on front panel and rear panel specifications.
  • Page 11 Refer to the following sources for additional information, and for product and software updates. ASUS Server Web-based Management (ASWM) user guide This manual tells how to set up and use the proprietary ASUS server management utility. ASUS websites The ASUS websites worldwide provide updated information for all ASUS hardware and...

  • Page 13: Chapter 1: Product Introduction

    Chapter 1: Product Introduction Product Introduction This chapter describes the general features of the chassis kit. It includes sections on front panel and rear panel specifications.

  • Page 14: System Package Contents

    System package contents Check your system package for the following items. Model Name RS700-E8-RS4 V2 Chassis ASUS R12D 1U Rackmount Chassis Motherboard ASUS Z10PP-D24 Server Board 1 x 800W 80PLUS Platinum Power Supply 1 x SAS 3.5-inch HDD Backplane 4 x Hot-swap 3.5-inch HDD trays...

  • Page 15: System Specifications

    System specifications The ASUS RS700-E8-RS4 V2 features the ASUS Z10PP-D24 server board. The server ® ® supports Intel Socket-R3 LGA2011-3 Xeon series processors plus other latest technologies through the chipsets onboard. Model Name RS700-E8-RS4 V2 2 x Socket R3 (LGA 2011-3) ®...
  • Page 16 Enterprise Linux ® SuSE Linux Enterprise Server OS Support CentOS Ubuntu VMware Citrix XenServer * Refer to http://www.asus.com/ for the latest OS support. Out of Band Remote On-Board ASMB8-iKVM for KVM-over-IP Management Hardware Solution Software ASUS ASWM Enterprise Dimension (HH x WW x DD) 686 mm x 444 mm x 44 mm (1U) Net Weight Kg (CPU, DRAM &...

  • Page 17: Front Panel Features

    I/O shield with openings for the rear panel connectors on the motherboard. Expansion slots LAN port 1 Serial port USB ports LAN port 2 PS/2 keyboard/mouse port Mezzanine 10G LAN card port (optional) *This port is for ASUS ASMB8-iKVM only. ASUS RS700-E8-RS4 V2...

  • Page 18: Internal Features

    Internal features The barebone server includes the basic components as shown. Power supply and power ASUS Z10PP-D24 Server Board System fans 4 x HDD trays SATA/SAS backplane (hidden) Slim type optical drive (hidden) PCI-E x8 slot (Gen3 x8 link) (OCP Mezzanine) (hidden)

  • Page 19: Led Information

    LAN connection is present 1.7.2 LAN (RJ-45) LEDs ACT/LINK LED SPEED LED ACT/LINK LED SPEED LED Status Description Status Description No link 10 Mbps connection GREEN Linked ORANGE 100 Mbps connection BLINKING Data activity GREEN 1 Gbps connection ASUS RS700-E8-RS4 V2...

  • Page 20: Hdd Status Led

    1.7.3 HDD status LED HDD status LED HDD Activity LED SATA/SAS HDD LED Description GREEN SATA/SAS HDD power ON HDD has failed and should be swapped immediately HDD Status GREEN/ Blinking RAID rebuilding GREEN/ HDD not found HDD Activity GREEN Blinking Read/write data from/into the SATA/SAS HDD Chapter 1: Product Introduction...

  • Page 21: Chapter 2: Hardware Information

    Chapter 2: Hardware Information Hardware Information This chapter lists the hardware setup procedures that you have to perform when installing or removing system components.

  • Page 22: Chassis Cover

    Chassis cover Removing the rear cover To remove the rear cover: Loosen the thumbscrew on the rear panel to release the rear cover from the chassis. Firmly hold the cover and slide it toward the rear panel for about half an inch until it is disengaged from the chassis.

  • Page 23: Central Processing Unit (Cpu)

    The motherboard comes with a surface mount LGA 2011-3 socket designed for the Intel Xeon E5-2600 V3/V4 family processor. • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related. • Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA 2011-3 socket. • The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap. 2.2.1 Installing the CPU and heatsink To install a CPU: Remove the rear cover. For more information, see the section Chassis cover. Remove the air duct. ASUS RS700-E8-RS4 V2...
  • Page 24 Locate the CPU socket on the motherboard. Before installing the CPU, ensure that the socket box is facing toward you and the triangle mark is on the top-right position. Triangle mark Chapter 2: Hardware Information...
  • Page 25 Press down the load lever with your thumb (A), move it to the right until it is released from the retention tab (B), then gently lift the load lever (C). To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. Load lever Press down the right load lever with your thumb (D), move it to the left until it is released from retention tab (E), then gently lift the load lever (F). ASUS RS700-E8-RS4 V2...
  • Page 26 Push the left load lever to slightly lift the load plate (G). edge of the Load plate Do not insert the load lever into the retention tab. Hold the edge then gently lift the load plate (H). Load plate Triangle mark Get the CPU. Align and position the CPU over the socket ensuring that the triangle mark on the CPU matches the triangle mark on the socket box. 10. Install the CPU into the slot. The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the CPU pins on the socket.
  • Page 27 12. Push down the right load lever (I) ensuring that the edge of the load plate is fixed and tucked securely under the lever (J) then insert the right load lever under the retention tab (K). The PnP cap pops out of the load plate when the right load lever is inserted into the retention tab. Keep the PnP cap. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the PnP cap on the LGA 2011 socket. PnP cap 13. Push down the left load lever (L) then Retention tab insert it under the retention tab (M). ASUS RS700-E8-RS4 V2...
  • Page 28 14. Apply some Thermal Interface Material to the exposed area of the CPU that the heatsink will be in contact with. • Ensure that the Thermal Interface Material is spread in an even thin layer. • Some heatsinks come with pre-applied Thermal Interface Material. If so, skip this step. The Thermal Interface Material is toxic and inedible. DO NOT eat it. If it gets into your eyes or touches your skin, wash it off immediately, and seek professional medical help. 15. Prepare the CPU heatsink. 16. Place the heatsink on top of the installed CPU ensuring that the four fasteners matches the holes on the motherboard. 17. Twist each of the four screws with a Phillips (cross) screwdriver just enough to attach the heatsink to the motherboard. When the four screws are attached, tighten them one by one in a diagonal sequence to completely secure the heatsink.
  • Page 29 18. Replace the air duct. ASUS RS700-E8-RS4 V2...

  • Page 30: System Memory

    System memory 2.3.1 Overview The motherboard comes with 24 Double Data Rate 4 (DDR4) Dual Inline Memory Modules (DIMM) sockets. The figure illustrates the location of the DDR4 DIMM sockets: Chapter 2: Hardware Information 2-10...

  • Page 31: Memory Configurations

    DIMM_C3 DIMM_C2 DIMM_C1 DIMM_D3 DIMM_D2 DIMM_D1 2 DIMMs 4 DIMMs 8 DIMMs • • • • 12 DIMMs 16 DIMMs • • • • 20 DIMMs • • • • • • • • • • 24 DIMMs ASUS RS700-E8-RS4 V2 2-11...
  • Page 32 2 CPU Configuration DIMM_E3 DIMM_E2 DIMM_E1 DIMM_F3 DIMM_F2 DIMM_F1 2 DIMMs • 4 DIMMs • • • • 8 DIMMs 12 DIMMs • • • • 16 DIMMs • • • • 20 DIMMs • • • • • • •...

  • Page 33: Installing A Dimm

    A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket in the wrong direction to avoid damaging the DIMM. Hold the DIMM by both of its ends then insert the DIMM vertically into the socket. Apply force to both ends of the DIMM simultaneously until the retaining clips snaps back into place. Ensure that the DIMM is sitting firmly on the DIMM slot. Locked Retaining Clip Always insert the DIMM into the socket VERTICALLY to prevent DIMM notch damage. 2.3.4 Removing a DIMM Simultaneously press the retaining clips outward to unlock the DIMM. Remove the DIMM from the socket. Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force. ASUS RS700-E8-RS4 V2 2-13...

  • Page 34: Hard Disk Drives

    Hard disk drives The system supports four (4) hot-swap SATA/SAS hard disk drives. The hard disk drive installed on the drive tray connects to the motherboard SATA/SAS ports via the SATA/SAS backplane. To install a hot-swap SATA/SAS HDD: Push the spring lock to the right (A) then pull the tray lever outward (B) to release the drive tray. The drive tray ejects slightly after you pull out the lever. tray lever spring lock Firmly hold the tray lever and pull the drive tray out of the bay.
  • Page 35 When installed, the SATA/SAS connector on the drive connects to the SATA/SAS interface on the backplane. Push the tray lever until it clicks and secures the drive tray in place. The drive tray is correctly placed when its front edge aligns with the bay edge. Repeat steps 1 to 7 to install the other SATA/SAS HDDs. ASUS RS700-E8-RS4 V2 2-15...

  • Page 36: Expansion Slot

    Expansion slot The barebone server comes with two PCIE slots - PCIE1 and PCIE2. These slots are pre- installed with a riser card bracket and a butterfly riser card bracket for installing PCIE expansion cards. You need to remove these expansion card brackets if you want to install PCIE expansion cards. 2.5.1 Installing an expansion card to the PCIE1 slot The pre-installed riser card bracket on the PCIE1 slot supports Full-Height (FH), Half-Length (HL) PCIE x16 expansion cards. To install a PCIE x16 (Gen3 x16 link), FH, HL card on the riser card bracket: Firmly hold the riser card bracket then pull it up to detach it from the PCIE x16 slot on the motherboard. PCIE x16 slot Remove the screw from the metal cover (A) then remove the metal cover (B) from riser card bracket. Get the PCIE expansion card. Install the PCIE expansion card to the riser card bracket (A) then secure the expansion card with a screw (B). Chapter 2: Hardware Information 2-16...

  • Page 37: Installing An Asus Pike Ii Card To The Pcie2 Slot

    Install the riser card bracket and the PCIE expansion card assembly into the PCIE connector on the motherboard. Ensure that the golden connectors of the riser card bracket is firmly seated in place. golden connector 2.5.2 Installing an ASUS PIKE II card to the PCIE2 slot The pre-installed butterfly riser card bracket on the PCIE2 slot has one PCIE x8 slot and one PCIE x16 slot. Although the PCIE x16 slot is physically longer than the PCIE x8 slot, both of these slots provides x8 Gen3 links. The PCIE x8 slot supports proprietary cards such as ASUS PIKE II series cards. Install your proprietary cards into this slot to maximize its use. To install a PCI-E x8 (Gen3 x8 link), proprietary card to the PCIE x8 slot: Remove the three screws that secure the butterfly riser card bracket to the chassis. Carefully remove the butterfly riser card bracket. ASUS RS700-E8-RS4 V2 2-17...
  • Page 38 Place the butterfly riser card on a flat and stable surface. metal cover Remove the metal cover then set it PCIE x8 slot aside. The default metal cover on the PCIE x8 slot of the butterfly riser card is an ASUS proprietary card bracket. It is screwless by design allowing for easy installation or removal. Prepare the ASUS PIKE II card. If your expansion card is pre-installed card bracket with a proprietary card bracket, proceed to step 9. Remove the two screws on the ASUS PIKE II card (A) then remove the card bracket (B). Get the metal cover (proprietary card...
  • Page 39 Install the ASUS PIKE II card and the metal cover assembly to the PCIE x8 slot as shown. Ensure that the metal cover is inserted and firmly seated in place. 10. Connect the mini-SAS HD cables to the ASUS PIKE II card. Cable 1 ASUS RS700-E8-RS4 V2 2-19...
  • Page 40 Remove the two screws from each side of the HDD module and remove the metal cover. Remove the default cable from the motherboard and the backplane. Cable 1 Chapter 2: Hardware Information 2-20...
  • Page 41 13. Connect the mini-SAS HD cable to the backplane. Cable 1 Cable 1 14. Replace the metal cover and secure it with the screws removed before. 15. Reinstall the riser card bracket and secure it with two screws. Cable 1 ASUS RS700-E8-RS4 V2 2-21...
  • Page 42 To install a PCI-E x8 (Gen3 x8 link), LP, HL card to the PCIE x16 slot: Place the butterfly riser card on a flat and stable surface. Remove the screw (A) from the metal metal cover cover then remove the metal cover (B). PCIE x16 slot Install the expansion card to PCIE x16 slot. Secure the expansion card with a screw. To replace or install the butterfly riser card bracket: Align and place the butterfly riser card bracket into the chassis as shown. Ensure that the screw holes on the riser card bracket matches the screw holes on the chassis. Secure the riser card bracket with three screws as shown. Chapter 2: Hardware Information 2-22...

  • Page 43: Configuring An Expansion Card

    Turn on the system and change the necessary BIOS settings, if any. See Chapter 5 for information on BIOS setup. Assign an IRQ to the card. Refer to the following tables. Install the software drivers for the expansion card. Standard Interrupt assignments Priority Standard function System Timer Keyboard Controller Programmable Interrupt Communications Port (COM2) Communications Port (COM1) Floppy Disk Controller System CMOS/Real Time Clock ACPI Mode when used IRQ Holder for PCI Steering IRQ Holder for PCI Steering PS/2 Compatible Mouse Port Numeric Data Processor Primary IDE Channel Secondary IDE Channel * These IRQs are usually available for ISA or PCI devices. ASUS RS700-E8-RS4 V2 2-23...

  • Page 44: Installing Mezzanine Cards

    2.5.4 Installing Mezzanine cards To install a Mezzanine card: Locate the Mezzanine card connector on your motherboard. Prepare the Mezzanine card. Insert the port of the Mezzanine card into the mounting hole on the chassis then insert the golden connector of the Mezzanine card into the OCP connector on the motherboard. Ensure that the stand screws on the motherboard is aligned and matched to the screw holes of the Mezzanine card. port mounting hole OCP connector stand screws Secure the Mezzanine card with four bundled screws. Chapter 2: Hardware Information 2-24...

  • Page 45: Installing M.2 (Ngff) Cards

    2.5.5 Installing M.2 (NGFF) cards To install an M.2 (NGFF) card: Locate the M.2 (NGFF) connector on your motherboard. Prepare the M.2 card. Remove the screw on the stand Align and insert the M.2 card into the M.2 connector on the motherboard. Ensure that the golden connector of the M.2 card is inserted firmly in place and that the screw hole on the M.2 card matches the stand screw on the motherboard. Secure the M.2 card with a screw. screw stand • Please pay attention when removing the screw, the stand screw might be removed together with it. • Ensure that the M.2 card is positioned between the screw and the stand screw before securing it. ASUS RS700-E8-RS4 V2 2-25...

  • Page 46: Cable Connections

    Cable connections • The bundled system cables are pre-connected before shipment. You do not need to disconnect these cables unless you will remove pre-installed components to install additional devices. • Refer to Chapter 4 for detailed information on the connectors. Pre-connected system cables 8-pin BPPWR1 power connector (from power supply to backplane) Auxiliary panel connector (from motherboard to front I/O board) Panel connector (from motherboard to front I/O board) System fan connectors (from motherboard FAN1-8 to system fans) USB connectors (from motherboard to front I/O board) SATA connector (from motherboard to SATA/SAS backplane board to connect ODD) ISATA connector (from motherboard to SATA/SAS backplane board to connect HDD 1 - HDD 4) Chapter 2: Hardware Information 2-26...

  • Page 47: Sata/Sas Backplane Cabling

    SATA/SAS backplane cabling Connects a 8-pin plug Connects the data cable from power supply connected to the motherboard Connect the SATA/SAS HDDs ASUS RS700-E8-RS4 V2 2-27...

  • Page 48: Removable/Optional Components

    Removable/optional components This section explains how to install optional components into the system and covers the following components: System fans Redundant power supply module Slim type optical drive (optional) Ensure that the system is turned off before removing any components. You may need to remove previously installed component or factory shipped components when installing optional components. 2.8.1 System fans To uninstall the system fans: Disconnect the system fan cable from the fan connector on the motherboard.
  • Page 49 To reinstall the system fans: Insert the fan to the fan cage. The airflow directional arrow on the fan side should point towards the system rear panel. Connect the system fan cable to the fan connector on the motherboard. ASUS RS700-E8-RS4 V2 2-29...

  • Page 50: Redundant Power Supply Module

    2.8.2 Redundant power supply module To replace a failed redundant power supply module: Lift up the power supply module lever. module lever Hold the power supply module lever and press the PSU latch then pull the power supply module out of the system chassis. module lever PSU latch Get the replacement power supply module.

  • Page 51: Replacing Optical Drive (Optional)

    Push the tray lever until it clicks, and secure the drive tray in place. The drive tray is correctly placed when its front edge aligns with the bay edge. Secure the optical drive with the screw that you removed in step 1. ASUS RS700-E8-RS4 V2 2-31...
  • Page 52 Chapter 2: Hardware Information 2-32...

  • Page 53: Chapter 3: Installation Options

    Chapter 3: Installation Options Installation Options This chapter describes how to install the optional components and devices into the barebone server.

  • Page 54: Tool-Less Friction Rail Kit

    Tool-less Friction Rail Kit The tool less design of the rail kit allows you to easily install the rack rails into the server rack without the need for additional tools. The kit also comes with a metal stopping bracket that can be installed to provide additonal support and stability to the server.
  • Page 55 Press the spring lock then insert the studs into the selected square mounting holes on the rack post. Press the spring lock on the other end of rail then insert the stud into the mounting hole on the rack post. Extend the rack rail, if necessary. Perform steps 3 to 4 for the other rack rail. Ensure that the installed rack rails (left and right) are aligned, secured, and stable in place. ASUS RS700-E8-RS4 V2...
  • Page 56 Lift the server chassis and insert into the rack rail. • Ensure that the rack rail cabinet and the rack posts are stable and standing firmly on a level surface. • We strongly recommend that at least two able-bodied persons perform the steps described in this guide. • We recommend the use an appropriate lifting tool or device, if necessary. Ensure to include the side knots on the two sides of the server in the rack rail holders. The illustrations shown above are for reference only.

  • Page 57: Chapter 4: Motherboard Information

    Chapter 4: Motherboard Information Motherboard Information This chapter includes the motherboard layout and brief descriptions of the jumpers and internal connectors.

  • Page 58: Motherboard Layout

    Motherboard layout Chapter 4: Motherboard Information...
  • Page 59 VGA connector (10-1 pin VGA_HDR1) 4-16 Baseboard Management Controller setting (3-pin BMC_EN1) ME firmware force recovery setting (3-pin ME_RCVR1) Mezzanine PCI card connector (MEZZPCIE1) 4-16 DDR4 thermal event setting (3-pin DIMMTRIP1) LAN controller setting (3-pin LAN_SW1, LAN_SW2) ASUS RS700-E8-RS4 V2...

  • Page 60: Jumpers

    Jumpers Clear RTC RAM (3-pin CLRTC1) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords.
  • Page 61 1–2 to activate the VGA feature. LAN controller setting (3-pin LAN_SW1, LAN_SW2) ® These jumpers allow you to enable or disable the onboard Intel I350-AM2 Gigabit LAN1/2 controller. Set to pins 1–2 to activate the Gigabit LAN feature. ASUS RS700-E8-RS4 V2...
  • Page 62 RAID configuration utility selection (3-pin RAID_SEL1) This jumper allows you to select the RAID configuration utility to use when you create disk arrays. Place the jumper caps over pins 1–2 if you want to use the LSI MegaRAID software RAID Setup Utility (default); otherwise, place the jumper caps to pins 2–3 to ®...
  • Page 63 Baseboard Management Controller setting (3-pin BMC_EN1) This jumper allows you to enable (default) or disable on-board BMC. DDR4 thermal event setting (3-pin DIMMTRIP1) This jumper allows you to enable or disable DDR4 DIMM thermal sensing event pin. ASUS RS700-E8-RS4 V2...
  • Page 64 Smart Ride Through (SmaRT) setting (3-pin SMART_PSU1) This jumper allows you to enable or disable the Smart Ride Through (SmaRT) function. This feature is disabled by default. Set to pins 1-2 to enable it. When enabled, SmaRT allows uninterrupted operation of the system during an AC loss event. SATA DOM power setting (3-pin DOM1_PWR1, DOM2_PWR2) This jumper allows you to configure the DOM power setting.
  • Page 65 PCH_MFG1 setting (3-pin PCH_MFG1) This jumper allows you to update the BIOS ME block select. ASUS RS700-E8-RS4 V2...

  • Page 66: Internal Connectors

    Internal connectors Serial ATA connectors (7-pin SATA1–2 [Blue]) ® These connectors, controlled by Intel C612 chipset, are for the Serial ATA signal cables for Serial ATA hard disk drives (SATA 5 connector for optical drive use by default). If the M.2 slot is occupied, the SATA6G_6 slot will be disabled. USB 2.0 connectors (10-1 pin USB56, USB78, Type A USB10) The USB56 and USB78 connectors are for USB 2.0 ports.
  • Page 67 USB-chargeable devices, optimized power efficiency, and backward compatibility with USB 2.0. LAN Activity LED connector (5-1 pin LAN34_LED1) These leads are for 10G LAN activity LEDs on the front panel. Connect the LAN LED cable to the backplane for LAN activity indication. ASUS RS700-E8-RS4 V2 4-11...
  • Page 68 ISATA and ISSATA connectors (ISATA, ISSATA) The ISATA connector (AHCI) supports 4 SATA 6Gb/s ports and Intel RAID/LSI MegaRAID. The ISSATA connector (AHCI) supports 4 SATA 6Gb/s ports and Intel RAID. Hard disk activity LED connector (4-pin HDLED1) This connector is used to connect to a hard disk drive active LED connector on the SCSI or RAID card.
  • Page 69 TPM connector (20-1 pin TPM1) This connector supports a Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity. ASUS RS700-E8-RS4 V2 4-13...
  • Page 70 System panel connector (20-pin PANEL1) This connector supports several chassis-mounted functions. • System power LED (3-pin PLED) This 3-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
  • Page 71 Locator LED cables to these 2-pin connector. The LEDs will light up when the Locator button is pressed. Locator Button/Swich (2-pin LOCATORBTN) These leads are for the locator button on the front panel. This button queries the state of the system locator. ASUS RS700-E8-RS4 V2 4-15...
  • Page 72 Power connectors (8-pin BPPWR1) These connectors are for the power supply plugs that connects to the bayplane. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. VGA connector (10-1 pin VGA_HDR1) This connector supports the VGA High Dynamic-Range interface.
  • Page 73 This connector allows you to install an M.2 device. • This connector supports type 2242 devices on both PCI-E and SATA interface. • If the M.2 slot is occupied, the SATA6G_6 slot will be disabled. The M.2 (NGFF) device is purchased separately ASUS RS700-E8-RS4 V2 4-17...
  • Page 74 Chassis Intrusion (2-pin INTRUSION1) These leads are for the intrusion detection feature for chassis with intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high level signal to these leads to record a chassis intrusion event. The default setting is to short the CHASSIS# and the GND pin by a jumper cap to disable the function.

  • Page 75: Internal Leds

    Internal LEDs CPU Error LED (ERRCPU1, ERRCPU2) The CPU Error LEDs light up to indicate failure of the corresponding CPU. BMC LED (BMCLED1) The BMC LED lights up to indicate that the on-board BMC is enabled. ASUS RS700-E8-RS4 V2 4-19...
  • Page 76 DIMM warning LED (MEMERRA1-A3, MEMERRB1-B3, MEMERRC1-C3, MEMERRD1-D4, MEMERRE1-E3, MEMERRF1-F3, MEMERRG1-G3, MEMERRH1-H3) The DIMM warning LEDs light up to indicate that an impending failure of the corresponding DIMM. Location LED (LOCLED2) This onboard LED lights up when the Location button on the server is pressed or when triggered by a system management software.
  • Page 77 CATT LED (CATTERR1) The CATT LED indicates that the system has experienced a fatal or catastrophic error and cannot continue to operate. OCPLAN Activity LED connector (4-pin OCP_LED1) OCPLAN LED connector supports ASUS MCB-10G-2S OCP card Active LED. ASUS RS700-E8-RS4 V2 4-21...
  • Page 78 Q-Code LEDs (LED1) The Q-Code LED provides a 2-digit display that shows the status of your system. Refer to the Q-Code table of this user guide for more information about the 2-digit codes. Q-Code table Code Description Not used Power on. Reset type detection (soft/hard). AP initialization before microcode loading System Agent initialization before microcode loading PCH initialization before microcode loading...
  • Page 79 F5 – F7 Recovery PPI is not available Recovery capsule is not found Invalid recovery capsule Reserved for future AMI error codes FB – FF DXE Core is started NVRAM initialization Installation of the PCH Runtime Services ASUS RS700-E8-RS4 V2 4-23...
  • Page 80 Q-Code table (continued) Code Description CPU DXE initialization is started 63 – 67 PCI host bridge initialization System Agent DXE initialization is started System Agent DXE SMM initialization is started System Agent DXE initialization (System Agent module specific) 6B – 6F PCH DXE initialization is started PCH DXE SMM initialization is started PCH devices initialization...
  • Page 81 System is waking up from the S4 sleep state 0x40 System has transitioned into ACPI mode. Interrupt controller is in PIC mode. 0xAC System has transitioned into ACPI mode. Interrupt controller is in APIC mode. 0xAA ASUS RS700-E8-RS4 V2 4-25...
  • Page 82 4-26 Chapter 4: Motherboard Information...

  • Page 83: Chapter 5: Bios Setup

    Chapter 5: BIOS Setup BIOS Setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.

  • Page 84: Managing And Updating Your Bios

    BIOS in the future. Copy the original motherboard BIOS using the BUPDATER utility. 5.1.1 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using a USB flash drive that contains the updated BIOS file.

  • Page 85: Asus Ez Flash Utility

    5.1.2 ASUS EZ Flash Utility The ASUS EZ Flash Utility feature allows you to update the BIOS without having to use a DOS-based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com. To update the BIOS using EZ Flash Utility: Insert the USB flash disk that contains the latest BIOS file into the USB port. Enter the BIOS setup program. Go to the Tool menu then select ASUS EZ Flash Utility.

  • Page 86: Bupdater Utility

    The succeeding BIOS screens are for reference only. The actual BIOS screen displays may not be the same as shown. The BUPDATER utility allows you to update the BIOS file in the DOS environment using a bootable USB flash disk drive with the updated BIOS file. Updating the BIOS file To update the BIOS file using the BUPDATER utility: Visit the ASUS website at www.asus.com and download the latest BIOS file for the motherboard. Save the BIOS file to a bootable USB flash disk drive. Copy the BUPDATER utility (BUPDATER.exe) from the ASUS support website at www.asus.com/support to the bootable USB flash disk drive you created earlier. Boot the system in DOS mode, then at the prompt, type: BUPDATER /i[filename].CAP where [filename] is the latest or the original BIOS file on the bootable USB flash disk drive, then press <Enter>. A:\>BUPDATER /i[file name].CAP Chapter 5: BIOS Setup...
  • Page 87 The utility verifies the file, then starts updating the BIOS file. ASUS Tek. EzFlash Utility New Platform Current Platform Platform : Z10PP-D24 Platform : Z10PP-D24 Version : 0022 Version : 0020 Build Date :05/05/2014 Build Date :04/25/2014 System Volume Information <DIR> Z10PP-D24 BIOS <DIR> Windows <DIR> [Up/Down/Left/Right]:Switch [Enter]:Choose [q]:Exit DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! The utility returns to the DOS prompt after the BIOS update process is completed.

  • Page 88: Bios Setup Program

    If the system becomes unstable after changing any BIOS settings, load the default settings to ensure system compatibility and stability. Press <F5> and select Yes to load the BIOS default settings. • The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. Chapter 5: BIOS Setup...

  • Page 89: Bios Menu Screen

    For changing the Server Mgmt settings Event Logs For changing the event log settings Monitor F or displaying the system temperature, power status, and changing the fan settings Security For changing the security settings Boot For changing the system boot configuration Tool For configuring options for special functions Exit For selecting the exit options To select an item on the menu bar, press the right or left arrow key on the keyboard until the desired item is highlighted. ASUS RS700-E8-RS4 V2...

  • Page 90: Menu Items

    5.2.3 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Event Logs, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items. 5.2.4 Submenu items A solid triangle before each item on any menu screen means that the item has a submenu. To display the submenu, select the item then press <Enter>. 5.2.5 Navigation keys At the bottom right corner of a menu screen are the navigation keys for the BIOS setup program. Use the navigation keys to select items in the menu and change the settings.

  • Page 91: Main Menu

    Main menu When you enter the BIOS Setup program, the Main menu screen appears. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. 5.3.1 System Date [Day xx/xx/xxxx] Allows you to set the system date. 5.3.2 System Time [xx:xx:xx] Allows you to set the system time. ASUS RS700-E8-RS4 V2...

  • Page 92: Advanced Menu

    Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. 5-10 Chapter 5: BIOS Setup...

  • Page 93: Acpi Settings

    Allows you to enable or disable the ability of the system to hibernate (OS/Sleep State). Configuration options: [Disabled] [Enabled] This option may be not effective with some OS. 5.4.2 Smart Settings SMART Self Test [Enabled] Allows you to run SMART Self Test on all HDDs during POST. Configuration options: [Disabled] [Enabled] ASUS RS700-E8-RS4 V2 5-11...

  • Page 94: Nct6779D Super Io Configuration

    5.4.3 NCT6779D Super IO Configuration Serial Port 1 / Serial Port 2 Configuration Allows you to set the parameters of Serial Port 1 / Serial Port 2. Serial Port [Enabled] Allows you to enable or disable Serial Port. Configuration options: [Disabled] [Enabled] Change Settings [Auto] Allows you to choose the setting for Super IO device.

  • Page 95: Onboard Lan I350 Io Configuration

    Allows you to enable or disable the Intel LAN. Configuration options: [Disabled] [Enabled] The following items appear only when Intel LAN I350 LAN3 / LAN4 Enable is set to [Enabled]. LAN3/ LAN4 Option ROM Support [Enabled] Allows you to load the Intel LAN ROM. Configuration options: [Disabled] [Enabled] ASUS RS700-E8-RS4 V2 5-13...

  • Page 96: Serial Port Console Redirection

    5.4.5 Serial Port Console Redirection COM1/COM2 Console Redirection [Enabled] Allows you to enable or disable the console redirection feature. Configuration options: [Disabled] [Enabled] The following item appears only when you set Console Redirection to [Enabled]. Console Redirection Settings This item becomes configurable only when you enable the Console Redirection item. The settings specify how the host computer and the remote computer (which the user is using) will exchange data.
  • Page 97 This setting allows you to specify if Bootloader is selected than Legacy console redirection. Configuration options: [Always Enable] [Bootloader] Serial Port for Out-of-Band Management/Windows Emergency Management Services (EMS) Console Redirection [Disabled] Allows you to enable or disable the console redirection feature. Configuration options: [Disabled] [Enabled] ASUS RS700-E8-RS4 V2 5-15...
  • Page 98 The following item appears only when you set Console Redirection to [Enabled]. Console Redirection Settings Out-of-Band Mgmt Port [COM1] Microsoft Windows Emergency Management Services (EMS) allow for remote management of a Windows Server OS through a serial port. Configuration options: [COM1] [COM2] Terminal Type [VT-UTF8] Microsoft Windows Emergency Management Services (EMS) allow for remote management of a Windows Server OS through a serial port. Configuration options: [VT100] [VT100+] [VT-UTF8] [ANSI] Bits per second [115200] Microsoft Windows Emergency Management Services (EMS) allow for remote management of a Windows Server OS through a serial port. Configuration options: [9600] [19200] [57600] [115200] Flow Control [None] Microsoft Windows Emergency Management Services (EMS) allow for remote management of a Windows Server OS through a serial port. Configuration options: [None] [Hardware RTS/CTS] [Software Xon/Xoff] 5-16 Chapter 5: BIOS Setup...

  • Page 99: Apm

    Configuration options: [Power Off] [Power On] [Last State] Power On By PCIE [Disabled] [Disabled] Disables the PCIE devices to generate a wake event. [Enabled] Enables the PCIE devices to generate a wake event. Power On By Ring [Disabled] [Disabled] Disables the PCIE devices to generate a wake event. [Enabled] Enables the PCIE devices to generate a wake event. Power On By RTC [Disabled] [Disabled] Disables RTC to generate a wake event. [Enabled] W hen set to [Enabled], the items RTC Alarm Date (Days) and Hour/Minute/Second will become user-configurable with set values. ASUS RS700-E8-RS4 V2 5-17...

  • Page 100: Advanced Power Management Configuration

    5.4.7 Advanced Power Management Configuration Allows you to configure the system's ACPI parameters. Power Boost [Normal] This item increases extra power input to processor(s) and computing performance depending on applications. Make sure your thermal solution and power supply are able to handle this circumstacnes. Configuration options: [Normal] [High] [Extreme] 5-18 Chapter 5: BIOS Setup...

  • Page 101: Pci Subsystem Settings

    Allows you to enable or disable 64-bit capable devices to be decoded in above 4G address space. It only works if the system supports 64-bit PCI decoding. Configuration options: [Disabled] [Enabled] SR-IOV Support [Disabled] This option enables or disables SIngle Root IO Virtualization Support if the system has SR- IOV capable PCIe devices. Configuration options: [Disabled] [Enabled] ASUS RS700-E8-RS4 V2 5-19...

  • Page 102: Network Stack Configuration

    5.4.9 Network Stack Configuration Network stack [Disabled] Enables or disables the network stack feature. Configuration options: [Disable] [Enable] The following item appears only when Network stack is set to [Enabled]. Ipv4 PXE Support [Enabled] Enables or disables the Ipv4 PXE Boot Support. If disabled, Ipv4 PXE boot option will not be created. Configuration options: [Disabled] [Enabled] Ipv6 PXE Support [Enabled] Enables or disables the Ipv6 PXE Boot Support. If disabled, Ipv6 PXE boot option will not be created. Configuration options: [Disabled] [Enabled] PXE boot wait time [0] Wait time to press ESC key to abort the PXE boot.

  • Page 103: Csm Configuration

    This allows you to set the display mode for option ROM. Configuration options: [Force BIOS] [Keep Current] Boot Option filter [Legacy only] This option allows you to control the Legacy/UEFI ROMs priority. Configuration options: [UEFI and Legacy] [Legacy only] [UEFI only] Network / Storage / Video [Legacy] This option allows you to control the execution of UEFI and Legacy PXE / Storage / Video OpROM. Configuration options: [UEFI] [Legacy] Other PCI devices [Legacy] This item determines the OpROM execution policy for devices other than Network, Storage, or Video. Configuration options: [UEFI] [Legacy] ASUS RS700-E8-RS4 V2 5-21...

  • Page 104: Trusted Computing

    5.4.11 Trusted Computing Configuration Security Device Support [Disabled] Allows you to enable or disable the BIOS support for security device. Configuration options: [Disabled] [Enabled] 5-22 Chapter 5: BIOS Setup...

  • Page 105: Usb Configuration

    USB Mass Storage Driver Support [Enabled] Allows you to enable or disable the USB Mass Storage driver support. Configuration options: [Disabled] [Enabled] Port 60/64 Emulation [Enabled] This allows you to enable the I/O port 60h/64h emulation support. This should be enabled for the complete USB keyboard legacy support for non-USB aware OSes. Configuration options: [Disabled] [Enabled] ASUS RS700-E8-RS4 V2 5-23...

  • Page 106: Iscsi Configuration

    USB hardware delays and time-outs USB transfer time-out [20 sec] The time-out value for control, bulk, and interrupt transfer. Configuration options: [1 sec] [5 sec] [10 sec] [20 sec] Device reset time-out [20 sec] USB mass storage device start unit command time-out. Configuration options: [10 sec] [20 sec] [30 sec] [40 sec] Device power-up delay [Auto] This is the maximum time the device will take before it properly reports itself to the host controller. Configuration options: [Auto] [Manual] Mass Storage Devices Generic 8.07 [Auto] Allows you to select the mass storage device emulation type. Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CD-ROM] 5.4.13 iSCSI Configuration...

  • Page 107: Intelrcsetup Menu

    IntelRCSetup menu The IntelRCSetup menu items allow you to change the processor and chipset settings. ASUS RS700-E8-RS4 V2 5-25...

  • Page 108: Processor Configuration

    5.5.1 Processor Configuration Per Socket Configuration Allows you to set the number of cores to enable. 0 means all cores. Total of 14 cores available. Hyper Threading [Enabled] ® Allows you to enable or disable the Intel Hyper-Threading Technology function. When disabled, only one thread per activated core is enabled. Configuration options: [Disabled] [Enabled] Execute Disable Bit [Enabled] XD can prevent certain classes of malicious buffer overflow attacks when combined with a supporting OS (Windows Server 2003 SP1, Windows XP SP2, SuSE Linux 9.2, Redhat...
  • Page 109 This Item allows you to enable or disable the extended APIC support. Configuration options: [Disabled] [Enabled] AES-NI [Enabled] This Item allows you to enable or disable the AES-NI support. Configuration options: [Disabled] [Enabled] Down Stream PECI [Disabled] This Item allows you to enable the PCIe Down Stream PECI writer. Configuration options: [Disabled] [Enabled] ASUS RS700-E8-RS4 V2 5-27...

  • Page 110: Advanced Power Management Configuration

    5.5.2 Advanced Power Management Configuration Power Technology [Energy Efficient] This item allows you to enable power management features. Configuration options: [Disabled] [Energy Efficient] [Custom] Config TDP [Disabled] This item allows you to enable/disable the Config TDP. Configuration options: [Disabled] [Enabled] CPU Advanced PM Turning Energy Perf BIAS Energy Performance Tuning [Disabled] Allows you to select whether BIOS or Operating System chooses energy performance bias tuning.

  • Page 111: Qpi Configuration

    5.5.4 QPI Configuration QPI General Configuration QPI Status This item displays information about the QPI status. Link Speed Mode [Fast] This item allows you to select the QPI link speed as either the fast mode or slow mode. Configuration options: [Slow] [Fast] Link Frequency Select [Auto] This item allows for selecting the QPI link frequency. Configuration options: [Auto] [6.4 GT/s] [8.0 GT/s] [9.6 GT/s] QPI Link0p [Enable] Configuration options: [Disable] [Enable] QPI Link1 [Enable] Configuration options: [Disable] [Enable] ASUS RS700-E8-RS4 V2 5-29...

  • Page 112: Memory Configuration

    5.5.5 Memory Configuration Enforce POR [Auto] Allows you to enforce POR restrictions for DDR4 frequency and voltage programming. Configuration options: [Auto] [Enforce POR] [Disabled] [Enforce Stretch Goals] Memory Frequency [Auto] Allows you to select the memory frequency setting. Configuration options: [Auto] [1333] [1600] [1866] [2133] Halt on mem Training Error [Enabled] Allows you to enable or disable halt on mem Training Error. Configuration options: [Disabled] [Enabled] ECC Support [Auto] Allows you to enable or disable the ECC support.
  • Page 113 Memory Rank Sparing [Disabled] Allows you to enable or disable Memory Rank Sparing. Configuration options: [Disabled] [Enabled] Correctable Error Threshold [32767] Allows you to set the Correctable Error Threshold used for sparing, tagging, and leaky bucket. The range is from 1 to 32767. Patrol Scrub [Enabled] Allows you to enable or disable Patrol Scrub. Configuration options: [Disabled] [Enabled] Demand Scrub [Enabled] Allows you to enable or disable Demand Scrub. Configuration options: [Disabled] [Enabled] ASUS RS700-E8-RS4 V2 5-31...

  • Page 114: Iio Configuration

    5.5.6 IIO Configuration EV DFX Features [Disabled] Set this option to allow DFX Lock Bits to remain clear. Configuration options: [Disabled] [Enabled] PCIE Slot Option ROM Configuration PCIE1 / PCIE2 / MEZZPCIE1 Option ROM [Enabled] Allows you to enable or disable the PCIE1 / PCIE2 / MEZZPCIE1 Option ROM. Configuration options: [Disabled] [Enabled] Intel VT for Directed I/O (VT-d) Intel VT for Directed I/O (VT-d) [Enabled] Allows you to enable or disable the Intel Virtualization Technology for Directed I/O.

  • Page 115: Pch Configuration

    SATA Port 1 / SATA Port 2 / SATA Port 3 / SATA Port 4 Port 1 / Port 2 / Port 3 / Port 4 Allows you to enable or disable the SATA port. Configuration options: [Disabled] [Enabled] ASUS RS700-E8-RS4 V2 5-33...
  • Page 116 PCH SATA Configuration SATA Controller [Enabled] Allows you to enable or disable the SATA Controller. Configuration options: [Disabled] [Enabled] Configure SATA as [AHCI] Allows you to identify the SATA port connected to Solid State Drive or Hard Disk Drive. Configuration options: [IDE] [AHCI] [RAID] SATA Mode options SATA LED locate [Enabled] If enabled, LED/SGPIO hardware is attached. Configuration options: [Disabled] [Enabled] Support Aggressive Link Power Management [Enabled] Allows you to enable or disable the Suport Aggressive Link Power (SALP) Management. Configuration options: [Disabled] [Enabled] SATA Port 1~6 Port 1 / Port 2 / Port 3 / Port 4 / Port 5 / Port 6 [Enabled] Allows you to enable or disable the SATA port.

  • Page 117: Miscellaneous Configuration

    Allows you to enable or disable the PCH Thermal Device (D31:F6). Configuration options: [Auto] [Disabled] [Enabled] Alert Enable Lock [Disabled] Allows you to lock all Alert Enable settings. Configuration options: [Disabled] [Enabled] 5.5.8 Miscellaneous Configuration Active Video [Offboard Device] Allows you to select the video type. Configuration options: [Onboard Device] [Offboard Device] 5.5.9 Server ME Configuration Displays the Server ME Technology parameters on your system. ASUS RS700-E8-RS4 V2 5-35...

  • Page 118: Runtime Error Logging Support

    5.5.10 Runtime Error Logging Support Runtime Error Logging S/W Error Injection Support [Disabled] This item, when enabled, is supported by unlocking MSR 0x790. Configuration options: [Disabled] [Enabled] Whea Settings Whea Support [Disabled] This item allows you to enable or disable the WHEA support. Configuration options: [Disabled] [Enabled] Memory Error Enabling Memory corrected Error enabling [Disabled] This item allows you to enable or disable the WHEA Memory corrected errors. Configuration options: [Disabled] [Enabled] 5-36 Chapter 5: BIOS Setup...

  • Page 119: Server Mgmt Menu

    This item allows you to start a BIOS timer which can only be shut off by Intel Management Software after the OS loads. Configuration options: [Disabled] [Enabled] The following items is configurable only when the OS Watchdog Timer is set to [Enabled]. OS Wtd Timer Timeout [10 minutes] Allows you to configure the length fo the OS Boot Watchdog Timer. Configuration options: [5 minutes] [10 minutes] [15 minutes] [20 minutes] OS Wtd Timer Policy [Reset] This item allows you to configure the how the system should respond if the OS Boot Watch Timer expires. Configuration options: [Do Nothing] [Reset] [Power Down] Serial Mux [Disabled] This item allows you to enable or disable Serial Mux configuration. Configuration options: [Disabled] [Enabled] ASUS RS700-E8-RS4 V2 5-37...
  • Page 120 System Event Log Allows you to change the SEL event log configuration. SEL Components [Enabled] Allows you to enable or disable all features of system Event Logging during boot. Configuration options: [Disabled] [Enabled] • The following items appears only when you set SEL Components to [Enabled]. • All values changed here do not take effect until computer is restarted. Erase SEL [No] Allows you to choose options for erasing SEL. Configuration options: [No] [Yes, On next reset] [Yes, On every reset] When SEL is Full [Do Nothing] Allows you to choose options for reactions to a full SEL.
  • Page 121 Configuration options: [Lower Case] [Upper Case] IPv6 BMC Lan Option [Enable] This item allows you to enable or disable the IPv6 BMC LAN channel function. Disabling this item will not modify any BMC network during BIOS phase. Configuration options: [Disable] [Enable] IPv6 BMC LAN IP Address source [Previous State] Select to configure LAN channel parameters statically or dynamically(by BIOS or BMC). Configuration options: [ Previous State] [Static] [Dynamic-Obtained by BMC running DHCP] ASUS RS700-E8-RS4 V2 5-39...
  • Page 122 The following items appear only when you set IP BMC Lan IP Address Source to [Static]. IPv6 BMC LAN IP Address Allows you to input IPv6 BMC Lan IP address. IPv6 BMC LAN IP Prefix Length Allows you to input IPv6 BMC Lan IP Prefix Length. IPv6 BMC LAN Default Gateway Allows you to input IPv6 BMC Lan Default Gateway.

  • Page 123: Event Logs Menu

    Choose options for erasing Smbios Event Log. Erasing is done prior to any logging activation during reset. Configuration options: [No] [Yes, Next reset] [Yes, Every reset] When Log is Full [Do Nothing] Allows you to choose options for reactions to a full Smbios Event Log. Configuration options: [Do Nothing] [Erase Immediately] ASUS RS700-E8-RS4 V2 5-41...

  • Page 124: View Smbios Event Log

    Smbios Event Log Standard Settings Log System Boot Event [Disabled] Allows you to choose options to enable/disable logging of System boot event. Configuration options: [Enabled] [Disabled] MECI [1] Mutiple Event Count Increment (MECI). The number of occurrences of a duplicate event that must pass before the multiplt-event counter associated with the log entry is updated, specified as a numeric value in the range 1 to 255.

  • Page 125: Monitor Menu

    Voltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. CPU FAN1&2 FRNT FAN1 mode [Generic Mode] Allows you to configure the ASUS Smart Fan feature that smartly adjusts the fan speeds for more efficient system operation. Configuration options: [Generic Mode] [High Speed Mode] [Full Speed Mode] [Manual Mode] Duty % [50] This item appears only when CPU FAN1&2 FRNT FAN1 mode is set to [Manual Mode]. This item allows you to configure the fan duty setting from 10% to 100%. FAN2&3/1&4/6&7/5&8 [Generic Speed] Allows you to configure the ASUS Smart Fan feature that smartly adjusts the fan speeds for more efficient system operation. Configuration options: [Generic Speed] [High Speed] [Full Speed] [Manual] ASUS RS700-E8-RS4 V2 5-43...

  • Page 126: Security Menu

    Security menu This menu allows a new password to be created or a current password to be cchanged. The menu also enables or disables the Secure Boot state and lets the user configure the System Mode state. Administrator Password To set an administrator password: Select the Administrator Password item and press <Enter>. From the Create New Password box, key in a password, then press <Enter>. Confirm the password when prompted. To change an administrator password: Select the Administrator Password item and press <Enter>.
  • Page 127 Secure Boot can be enabled if the system is running in User mode with enrolled platform Key (EPK) or if the CSM function is disabled. Configuration options: [Disabled] [Enabled] Secure Boot Mode [Custom] Allows you to set the Secure Boot selector. Configuration options: [Custom] [Standard] ASUS RS700-E8-RS4 V2 5-45...
  • Page 128 Key Management This item only appears when the item Secure Boot Mode is set to [Custom]. The Key Management item allows you to modify Secure Boot variables and set Key Management page. Default Key Provision [Disabled] Configuration options: [Disabled] [Enabled] Enroll All Factory Default Keys This item will ask you if you want to Install Factory Default secure keys. Select Yes if you want to load the default secure keys, otherwise select No. Save All Secure Boot Variables This item will ask you if you want to save all secure boot variables. Select Yes if you want to save all secure boot variables, otherwise select No. Platform Key (PK) / Key Exchange Key (KEK) / Authorized Signatures (DB) / Authorized TimeStamps (DBT) / Forbidden Signatures (DBX) Configuration options: [Delete] [Set New] [Append] 5-46...

  • Page 129: Boot Menu

    Configuration options: [Warning] [Halt] Boot Option Priorities These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. ASUS RS700-E8-RS4 V2 5-47...

  • Page 130: Tool Menu

    Tool menu The Tool menu items allow you to configure options for special functions. Select an item then press <Enter> to display the submenu. ASUS EZ Flash Allows you to run ASUS EZ Flash BIOS ROM Utility when you press <Enter>. Refer to the ASUS EZ Flash Utility section for details. 5-48 Chapter 5: BIOS Setup...

  • Page 131: Exit Menu

    Discard Changes & Reset Reset system setup without saving any changes. Save Options Save Changes Save changes done so far to any of the setup options. Discard Changes Discard changes done so far to any of the setup options. ASUS RS700-E8-RS4 V2 5-49...
  • Page 132 Restore Defaults Restore/load default values for all the setup options. Save as User Defaults Save the changes done so far as User Defaults. Restore User Defaults Restore the User Defaults to all the setup options. Boot Override These items displays the available devices. The device items that appears on the screen depends on the number of devices installed in the system. Click an item to start booting from the selected device.

  • Page 133: Chapter 6: Raid Configuration

    Chapter 6: RAID Configuration RAID Configuration This chapter provides instructions for setting up, creating, and configuring RAID sets using the available utilities.

  • Page 134: Setting Up Raid

    Setting up RAID The motherboard supports the following SATA RAID solutions: • LSI MegaRAID software RAID Configuration Utility with RAID 0, RAID 1, and RAID 10 support (for both Linux and Windows OS). ® • Intel Rapid Storage Technology enterprise Option ROM Utility with RAID 0, RAID 1, RAID 10, and RAID 5 support (for Windows OS only).

  • Page 135: Installing Hard Disk Drives

    Rapid Storage Technology if you installed Serial ATA ® hard disk drives on the Serial ATA connectors supported by the Intel C612 chipset. ® Refer to the succeeding section for details on how to use the RAID configuration utility. ASUS RS700-E8-RS4 V2...

  • Page 136: Lsi Software Raid Configuration Utility

    LSI Software RAID Configuration Utility The LSI MegaRAID software RAID configuration utility allows you to create RAID 0, RAID 1, or RAID 10 set(s) from SATA hard disk drives connected to the SATA connectors supported by the motherboard southbridge chip. To enter the LSI MegaRAID software RAID configuration utility: Turn on the system after installing all the SATA hard disk drives.

  • Page 137: Creating A Raid Set

    Configure View/Add Configuration Initialize Clear Configuration Objects Select Boot Drive Rebuild Check Consistency Defines Physical Arrays. An Array Will Automatically Become A VD Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option ASUS RS700-E8-RS4 V2...
  • Page 138 The ARRAY SELECTION MENU displays the available drives connected to the SATA ports. Use the up/down arrow keys to select the drives you want to include in the RAID set, and then press <Space>. When selected, the drive indicator changes from READY to ONLIN A[X]-[Y], where X is the array number, and Y is the drive number.
  • Page 139 RAID = 1 READY RAID 1 Units= MB Size = 152146MB = OFF = On Accept SPAN = NO Choose RAID Level For This VD Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option ASUS RS700-E8-RS4 V2...
  • Page 140 Select Units from the Virtual Drive sub-menu, and then press <Enter>. Select the units for virtual drive size from the menu, and then press <Enter>. LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Virtual Drive(s) Configured Easy Configuration - ARRAY SELECTION MENU RAID Size...
  • Page 141 Initialize Select Boot Drive Objects Virtual Drive(s) Configured Rebuild Check Consistency RAID Size #Stripes StripSz Status 148.580GB 64KB ONLINE Select Yes Or No Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option ASUS RS700-E8-RS4 V2...
  • Page 142 Using New Configuration When a RAID set already exists, using the New Configuration command erases the existing RAID configuration data. If you do not want to delete the existing RAID set, use the View/Add Configuration command to view or create another RAID configuration. To create a RAID set using the New Configuration option: From the Management Menu, select Configure >...

  • Page 143: Adding Or Viewing A Raid Configuration

    The information of the selected hard disk drive is displayed at the bottom of the screen. Follow step 3 to 12 of section 6.2.1 Creating a RAID set: Using Easy Configuration to add a new RAID set. ASUS RS700-E8-RS4 V2 6-11...

  • Page 144: Initializing The Virtual Drives

    6.2.3 Initializing the virtual drives After creating the RAID set(s), you must initialize the virtual drives. You may initialize the virtual drives of a RAID set(s) using the Initialize or Objects command on the Management Menu. Using the Initialize command To initialize the virtual drive using the Initialize command: From the Management Menu, select Initialize, and then press <Enter>.
  • Page 145 Size #Stripes StripSz Status Management Menu Configure Init of VD Is In Process 148.580GB 64KB ONLINE Initialize VD 0 Initialization Complete. Press Esc.. Objects Rebuild Check Consistency 100% Completed Virtual Drives Virtual Drive 0 SPACE-(De)Select, F10-Initialize ASUS RS700-E8-RS4 V2 6-13...
  • Page 146 Using the Objects command To initialize the virtual drives using the Objects command: From the Management Menu, select Objects > Virtual Drive, and then press <Enter>. LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Objects Management Menu Adapter Configure Virtual Drive...
  • Page 147 Init Will Destroy Data On Selected VD(s) Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option A progress bar appears on screen. If desired, press <Esc> to abort initialization. When initialization is completed, press <Esc>. ASUS RS700-E8-RS4 V2 6-15...

  • Page 148: Rebuilding Failed Drives

    6.2.4 Rebuilding failed drives You can manually rebuild failed hard disk drives using the Rebuild command in the Management Menu. To rebuild a failed hard disk drive: From the Management Menu, select Rebuild, and then press <Enter>. LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Management Menu...
  • Page 149 FAIL A00-01 Rebuilding of Drive Will Take A Few Minutes. Start Rebuilding Drive (Y/N)? Check Consistency Port # 1 DISK 77247MB HDS72808PLA380 PF20A60A SPACE-(De)Select,F10-Start Rebuild,F2-Drive Information,F3-View Virtual Drives When rebuild is complete, press any key to continue. ASUS RS700-E8-RS4 V2 6-17...

  • Page 150: Checking The Drives For Data Consistency

    6.2.5 Checking the drives for data consistency You can check and verify the accuracy of data redundancy in the selected virtual drive. The utility can automatically detect and/or detect and correct any differences in data redundancy depending on the selected option in the Objects > Adapter menu. The Check Consistency command is available only for virtual drives included in a RAID 1 or RAID 10 set.
  • Page 151 • Continue - Continues the consistency check. • Abort - Aborts the consistency check. When you restart checking, it continues from zero percent. When checking is complete, press any key to continue. ASUS RS700-E8-RS4 V2 6-19...
  • Page 152 Using the Objects command To check data consistency using the Objects command: From the Management Menu, select Objects, and then select Virtual Drive from the sub-menu. Use the arrow keys to select the virtual drive you want to check, and then press <Enter>.

  • Page 153: Deleting A Raid Configuration

    Objects Select Boot Drive Rebuild Check Consistency Clear Existing Configuration Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option The utility clears all the current array(s). Press any key to continue. ASUS RS700-E8-RS4 V2 6-21...

  • Page 154: Selecting The Boot Drive From A Raid Set

    6.2.7 Selecting the boot drive from a RAID set You must have created a new RAID configuration before you can select the boot drive from a RAID set. See section 6.2.1 Creating a RAID set: Using New Configuration for details. To select the boot drive from a RAID set: From the Management Menu, select Configure >...

  • Page 155: Enabling Writecache

    Disk WC = On Check Consistency Read Ahead = On Disk Write Cache Setting of VD Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option When finished, press any key to continue. ASUS RS700-E8-RS4 V2 6-23...

  • Page 156: Intel ® Rapid Storage Technology Enterprise

    ® Intel Rapid Storage Technology enterprise SATA/SSATA Option ROM Utility The Intel Rapid Storage Technology enterprise SATA/SSATA Option ROM utility allows you ® to create RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge.

  • Page 157: Creating A Raid Set

    ]-Prev/Next [TAB]-(M)aster [SPACE]-(R)ecovery [ENTER]-Done Use the up/down arrow keys to move the selection bar then press <Space> to select a disk. A small triangle before the Port number marks the selected drive. Press <Enter> when you are done. ASUS RS700-E8-RS4 V2 6-25...
  • Page 158 Use the up/down arrow keys to select the stripe size for the RAID array (for RAID 0, 10 and 5 only) then press <Enter>. The available stripe size values range from 4 KB to 128 KB. The following are typical values: RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB...

  • Page 159: Deleting A Raid Set

    <N> to return to the DELETE VOLUME menu. DELETE VOLUME VERIFICATION ALL DATA IN THE VOLUME WILL BE LOST! (This does not apply to Recovery volumes) Are you sure you want to delete volume “Volume0”? (Y/N): ASUS RS700-E8-RS4 V2 6-27...

  • Page 160: Resetting Disks To Non-Raid

    6.3.3 Resetting disks to Non-RAID Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a RAID volume hard disk drive deletes all internal RAID structure on the drive. To reset a RAID set: From the utility main menu, select 3. Reset Disks to Non-RAID and press <Enter>. Press the up/down arrow keys to select the drive(s) or disks of the RAID set you want to reset, then press <Space>.

  • Page 161: Exiting The Intel ® Rapid Storage Technology Enterprise Sata/Ssata Option Rom Utility

    Select the port of destination disk for rebuilding (ESC to exit): Port Drive Model Serial # Size XXXXXXXXXXX XXXXXXXX XXX.GB ]-Previous/Next [ENTER]-Select [ESC]-Exit Select a destination disk with the same size as the original hard disk. ASUS RS700-E8-RS4 V2 6-29...
  • Page 162 The utility immediately starts rebuilding after the disk is selected. When done, the status of the degraded RAID volume is changed to “Rebuild”. Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023 Copyright(C) 2003-12 Intel Corporation. All Rights Reserved. MAIN MENU 1.

  • Page 163: Setting The Boot Array In The Bios Setup Utility

    Use up/down arrow keys to select the boot priority and press <Enter>. See the Boot menu section of Chapter 5 for more details. From the Exit menu, select Save Changes & Exit, then press <Enter>. When the confirmation window appears, select Yes, then press <Enter>. ASUS RS700-E8-RS4 V2 6-31...

  • Page 164: Intel ® Rapid Storage Technology Enterprise (Windows)

    ® Intel Rapid Storage Technology enterprise (Windows) The Intel Rapid Storage Technology enterprise allows you to create RAID 0, RAID 1, RAID ® 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge.

  • Page 165: Creating A Raid Set

    Click Next. • If you do not want to keep the data on one of the selected disks, select NO when prompted. • If you want to Enable volume write-back cache or Initialize volume, click Advanced. ASUS RS700-E8-RS4 V2 6-33...
  • Page 166 Confirm the volume creation, than click Create Volume to continue. This process could take a while depending on the number and size of the disks. You can continue using other applications during this time. Wait until the process is completed, then click OK when prompted. You still need to partition your new volume using Windows Disk Management before adding any data.

  • Page 167: Changing A Volume Type

    RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing. ASUS RS700-E8-RS4 V2 6-35...

  • Page 168: Deleting A Volume

    6.4.3 Deleting a volume Be cautious when deleting a volume. You will lose all data on the hard disk drives.Before you proceed, ensure that you back up all your important data from your hard drives. To delete a volume: From the utility main menu, select the volume (ex. Volume_0000) in Volumes field you want to delete.

  • Page 169: Preferences

    Allow you to set to show the notification area icon and show system information, warning, or errors here. E-Mail Preferences Allow you to set to sent e-mail of the following events: • Storage system information • Storage system warnings • Storage system errors ASUS RS700-E8-RS4 V2 6-37...
  • Page 170 6-38 Chapter 6: RAID Configuration...

  • Page 171: Chapter 7: Driver Installation

    Chapter 7: Driver Installation Driver Installation This chapter provides the instructions for installing the necessary drivers for different system components in both ® ® Linux and Windows Operating Systems.

  • Page 172: Raid Driver Installation

    RAID driver installation After creating the RAID sets for your server system, you are now ready to install an operating system to the independent hard disk drive or bootable array. This part provides the instructions on how to install the RAID controller drivers during OS installation. 7.1.1 Creating a RAID driver disk The system does not include a floppy drive.

  • Page 173: Installing The Raid Controller Driver

    Boot the computer using the Windows Server 2008 R2 OS installation disc. Follow the ® screen instructions to start installing Windows Server 2008 R2. When prompted to choose a type of installation, click Custom (advanced). Click Load Driver. ASUS RS700-E8-RS4 V2...
  • Page 174 A message appears, reminding you to insert the installation media containing the driver of the RAID controller driver. If you have only one optical drive installed in your system, eject the Windows OS installation disc and replace with the motherboard Support DVD into the optical drive.
  • Page 175 Enterprise RAID driver disk to the USB floppy disk drive, select ® OK, then press <Enter>. Insert Driver Disk Insert your driver disk into /dev/fd0 and press “OK” to continue. Back The drivers for the RAID card are installed to the system. ASUS RS700-E8-RS4 V2...
  • Page 176 When asked if you will load additional RAID controller drivers, select No, then press <Enter>. More Driver Disks? Do you wish to load any more driver disks? Follow the onscreen instructions to finish the OS installation. When the installation is completed, DO NOT click Reboot. Press <Ctrl> + <Alt> + <F2> to switch to the command-line interface from graphic user interface.
  • Page 177 Boot the system from the Red Hat OS installation CD. Press <Tab> to edit options. While booting from DVD, press <ESC> to give the third party driver. Enter the following command at the boot: Linux dd blacklist=isci blacklist=ahci nodmraid, then press <ENTER>. ASUS RS700-E8-RS4 V2...
  • Page 178 Select Yes using the <Tab> key when asked if you have the driver disk, then press <Enter>. Main Menu Do you have a driver disk? You have multiple devices which could serve as source for a driver disk. Choose one you like to use and select OK, then press <Enter>.
  • Page 179 The drivers for the RAID card are installed to the system. When asked if you will load additional RAID controller drivers, select No, then press <Enter>. More Driver Disks? Do you wish to load any more driver disks? Follow the onscreen instructions to finish the OS installation. ASUS RS700-E8-RS4 V2...
  • Page 180 Preparing the Linux Driver Ensure that there is another computer with a Linux-based OS to create the RAID driver. When creating the RAID driver, you may refer to the examples below which uses a 64bit SUSE Linux system to create a 64bit RAID driver for SUSE11 sp1. Copy the image file into the Linux system.
  • Page 181 To install the LSI MegaRAID controller driver when installing SUSE Linux Enterprise Server Boot the system from the SUSE OS installation CD. Use the arrow keys to select Installation from the Boot Options menu. Press <F6>, then select Yes from the menu. Press <Enter>. ASUS RS700-E8-RS4 V2 7-11...
  • Page 182 Use the USB drive to provide the third-party driver during the OS installation. Type the command brokenmodules=ahci in Boot Options field, and press <Enter>. When below screen appears, select the USB floppy disk drive (sda) as the driver update medium. Select OK, then press <Enter>. Please choose the Driver Update medium.

  • Page 183: Management Applications And Utilities Installation

    The contents of the support DVD are subject to change at any time without notice. Visit the ASUS website (www.asus.com) for the latest updates on software and utilities.
  • Page 184 7.3.1 Drivers menu tab The Drivers Menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. 7.3.2 Utilities menu tab The Utilities menu displays the software applications and utilities that the motherboard supports.
  • Page 185 Press the arrow down button in the lower part of the menu to view more items. 7.3.4 Manual menu The Manual menu provides the link to the Broadcom NetXtreme II Network Adapter user guide. You need an internet browser installed in your OS to view the User Guide. ASUS RS700-E8-RS4 V2 7-15...
  • Page 186 7.3.5 Contact information menu The Contact menu displays the ASUS contact information, e-mail addresses, and useful links if you need more information or technical support for your motherboard. 7-16 Chapter 7: Driver Installation...

  • Page 187: Intel ® Chipset Device Software Installation

    ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the support DVD. Click the item Intel Chipset Device Software from the menu. ® ® The Intel Chipset Device Software window appears. Click Next to start installation. ASUS RS700-E8-RS4 V2 7-17...
  • Page 188 Select Yes to accept the terms of the License Agreement and continue the process. Read the Readme File Information and press Next to continue the installation. Toggle Yes, I want to restart the computer now and click Finish to complete the setup process.

  • Page 189: Installing The Intel ® I350-Am1/I350-Am2/I210/ X540-Bt2 Gigabit Adapters Driver

    ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the support DVD. Click Intel I350-AM1/I350-AM2/I210/X540-BT2 Gigabit Adapters Drivers in the ® Drivers menu of the main screen to start the installation. Click Install Drivers and Software option to begin installation. ASUS RS700-E8-RS4 V2 7-19...
  • Page 190 Click Next when the Intel Network Connections–InstallShield Wizard window ® appears. Tick I accept the terms in the license agreement and click Next to continue. From the Setup Options window, click Next to start the installation. ® By default, Intel PROSet for Windows Device Manager and Windows PowerShell Module are ticked.
  • Page 191 Click Install to start the installation. When the installation is done, press Finish to complete the installation. ASUS RS700-E8-RS4 V2 7-21...

  • Page 192: Vga Driver Installation

    VGA driver installation This section provides the instructions on how to install the ASPEED Video Graphics Adapter (VGA) driver. You need to manually install the ASPEED VGA driver on a Windows operating system. ® To install the ASPEED VGA driver: Restart the computer, and then log on with Administrator privileges.
  • Page 193 Click Install to proceed with the installation. Click Finish to complete the installation. ASUS RS700-E8-RS4 V2 7-23...

  • Page 194: Intel ® Rapid Storage Technology Enterprise 4.0 Installation

    ® Intel Rapid Storage Technology enterprise 4.0 installation ® This section provides the instructions on how to install the Intel Rapid Storage Technology enterprise 4.0 on the system. ® You need to manually install the Intel Rapid Storage Technology enterprise 4.0 utility on a ®...
  • Page 195 Read the Warning message and click Next to continue. Read the License Agreement and click Yes to continue. Read the Readme File Information and click Next to continue. ASUS RS700-E8-RS4 V2 7-25...
  • Page 196 After completing the installation, click Next to complete the setup process. Select Yes, I want to restart my computer now and click Finish to restart your computer before using the program. 7-26 Chapter 7: Driver Installation...

  • Page 197: Appendix

    Appendix Appendix...

  • Page 198: Z10Pp-D24 Block Diagram

    Z10PP-D24 block diagram Appendix...

  • Page 199: Notices

    économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. CAN ICES-3(A)/NMB-3(A) ASUS RS700-E8-RS4 V2...

  • Page 200: Reach

    If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at https://www.asus.com/support/.

  • Page 201: Asus Contact Information

    Technical Support Telephone +886-2-2894-3447 (0800-093-456) Online Support https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=zh-tw ASUSTeK COMPUTER INC. (China) Address No. 5077, Jindu Road, Minhang District, Shanghai, China Telephone +86-21-5442-1616 +86-21-5442-0099 Web site https://www.asus.com.cn Technical Support Telephone +86-20-2804-7506 (400-620-6655) Online Support https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=zh-cn ASUS RS700-E8-RS4 V2...
  • Page 202 +1-510-608-4555 Web site https://www.asus.com/us/ Technical Support Support fax +1-812-284-0883 General support +1-812-282-2787 Online support https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=en-us ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, 40880 Ratingen, Germany +49-2102-959911 Web site https://www.asus.com/de/ Technical Support Telephone +49-1805-010923 Support Fax +49-2102-959911 Online support https://www.asus.com/support/Product/ContactUs/Services/...
  • Page 203 Web site https://www.asus.com/nl/ Technical Support Telephone +31-(0)591-5-70292 +31-(0)591-666853 E-mail advance.rma.eu@asus.com Online Support https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=nl-nl ASUS Polska Sp. z o.o. (Poland) Address Ul. Postępu 6, 02-676 Warszawa, Poland Web site https://www.asus.com/pl/ Technical Support Telephone +48-225718033 Online Support https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=pl-pl ASK-Service (Russia and CIS) г.Москва, ул.
  • Page 204 Appendix...

Table of Contents