Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1. Adhere the tape that secures the display cable to the display-panel assembly.
2. Route the display cable through the routing guides on the display-panel assembly.
3. Slide the display cable into the connector on the display panel and close the latch to secure the cable.
4. Adhere the tape on the display-cable connector.
5. Slide the sensor-board cable into the connector on the sensor board and close the latch to secure the cable.
6. Adhere the tape on the sensor-board connector.
Post-requisites
1. Replace the camera.
2. Follow the procedure from step 5 to step 6 in
3. Replace the
display
assembly.
4. Replace the battery.
5. Replace the
base
cover.
72
Replacing the display cable
Replacing the display cable
computer. After working inside your computer, follow the instructions in
"Replacing the display
panel".
42
After
www.dell.com/
Advertisement
Table of Contents
