Sony CDX-L300 Installation/Connections
Fm/am compact disc player
Hide thumbs
Also See for CDX-L300:
- Service manual (58 pages) ,
- Operating instructions manual (36 pages) ,
- Owner's record (24 pages)
Advertisement
Available languages
Available languages
Quick Links
FM/AM
Compact Disc
Player
Installation/Connections
Installation/Connexions
CDX-L300
Sony Corporation © 2002
1
1
4
Equipment used in illustrations (not supplied)
Appareils utilisés dans les illustrations (non fournis)
Front speaker
Haut-parleur frontal
Rear speaker
Haut-parleur arrière
3-237-525-11 (1)
Printed in Korea
2
3
4
5
6
Power amplifier
Amplificateur de puissance
2
A
B
Parts Iist (1)
The numbers in the list are keyed to those in the
instructions.
Caution
Handle the bracket 1 carefully to avoid injuring
2
your fingers.
Cautions
• This unit is designed for negative ground 12 V
DC operation only.
• Do not get the wires under a screw, or caught
in moving parts (e.g. seat railing).
• Before making connections, turn the car
ignition off to avoid short circuits.
• Connect the yellow and red power input leads
only after all other leads have been connected.
• Run all ground wires to a common ground
point.
• Be sure to insulate any loose unconnected
wires with electrical tape for safety.
•The use of optical instruments with this
product will increase eye hazard.
Notes on the power supply cord (yellow)
• When connecting this unit in combination with
other stereo components, the connected car
circuit's rating must be higher than the sum of
each component's fuse.
• When no car circuits are rated high enough,
connect the unit directly to the battery.
Connection example (2)
Notes (2-B)
• Be sure to connect the ground cord before
connecting the amplifier.
• If you connect an optional power amplifier and do
not use the built-in amplifier, the beep sound will
be deactivated.
AUDIO OUT
Connection diagram (3)
1
To a metal surface of the car
First connect the black ground lead, then
connect the yellow and red power input
leads.
2
To the power antenna control lead or power
supply lead of antenna booster amplifier
Notes
• It is not necessary to connect this lead if
there is no power antenna or antenna
booster, or with a manually-operated
telescopic antenna.
• When your car has a built-in FM/AM
antenna in the rear/side glass, see "Notes
on the control and power supply leads."
3
To AMP REMOTE IN of an optional power
amplifier
This connection is only for amplifiers.
Connecting any other system may damage
the unit.
4
To the +12 V power terminal which is
energized in the accessory position of the
ignition key switch
Notes
• If there is no accessory position, connect to
the +12 V power (battery) terminal which is
energised at all times.
Be sure to connect the black ground to it
first.
• When your car has a built-in FM/AM
antenna in the rear/side glass, see "Notes
on the control and power supply leads."
5
To the +12 V power terminal which is
energised at all times
Be sure to connect the black ground to it
first.
Notes on the control and power supply leads
• The power antenna control lead (blue) supplies
+12 V DC when you turn on the tuner.
• When your car has built-in FM/AM antenna in
the rear/side glass, connect the power antenna
control lead (blue) or the accessory power
input lead (red) to the power terminal of the
existing antenna booster. For details, consult
your dealer.
• A power antenna without relay box cannot be
used with this unit.
Advertisement
Related Manuals for Sony CDX-L300
Summary of Contents for Sony CDX-L300
- Page 1 FM/AM Compact Disc Player Installation/Connections Installation/Connexions CDX-L300 Sony Corporation © 2002 Printed in Korea Equipment used in illustrations (not supplied) Appareils utilisés dans les illustrations (non fournis) Front speaker Haut-parleur frontal Rear speaker Haut-parleur arrière 3-237-525-11 (1) Parts Iist (1) The numbers in the list are keyed to those in the instructions.
- Page 2 from car antenna de l’antenne de la voiture Left Gauche Right Droit Left Gauche Right Droit Memory hold connection When the yellow power input lead is connected, Liste des composants (1) power will always be supplied to the memory circuit even when the ignition key is turned off.
- Page 3 1 8 2 TOYOTA max. size to dashboard/center console 8 mm au tableau de bord/console centrale in.) Dimension max. 8 mm po.) Bracket Support Existing parts supplied with your car Pièces existantes fournies avec la voiture 5 3 m NISSAN max.
- Page 4 Installation de l’appareil dans une voiture japonaise (5) Cet appareil ne peut pas être installé dans certaines voitures japonaise. Consultez, dans ce cas, votre concessionnaire Sony. Remarque Pour éviter tout dysfonctionnement, utilisez uniquement les vis 2 pour le montage. Avertissement en cas d’installation dans une voiture...