Advertisement
Quick Links
SU2000L-(3KTL, 4KTL, 5KTL)-CN
Quick Guide
Issue: 02
Part Number: 31508726
Date: 2018-03-15
1
Overview
(1) LED
(5) Heat sink
(9) COM port (COM)
(13) USB-4G port cover (USB-4G)
For the model without an external WiFi antenna, the antenna port (ANT) is actually a cover and there is no port inside.
1. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure
accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind,
express or implied.
2. Before installing the device, closely read the user manual to get familiar with product information and safety precautions.
3. Only certified electricians are allowed to operate the device. Operation personnel must wear proper personal protective equipment (PPE) all
the time.
4. Before installing the device, check that the package contents are intact and complete against the packing list. If any damage is found or any
component is missing, contact your supplier.
5. Huawei shall not be liable for any consequence caused by violation of the storage, transportation, installation, and operation regulations
specified in this document and the user manual.
2
Installing the Device
Installation Requirements
2.1
Tilt and Space
If multiple inverters need to be installed, see SUN2000L-(3KTL, 4KTL, 5KTL)-CN
User Manual for the installation dimensions.
Installing the Mounting Bracket
2.2
Support-mounted Installation
(2) Front panel
(6) DC switch (DC SWITCH)
(10) Antenna port (ANT)
Dimensions
Prepare M8 stainless bolt assemblies (including flat washers, spring washers, and M8 bolts) with
appropriate lengths as well as matched flat washers and nuts based on the support specifications.
You are advised to
apply anti-rust paint
on the hole
positions for
protection.
1
Copyright © Huawei Technologies Co., Ltd. 2018. All rights reserved.
(3) Mounting plate
(4) Mounting bracket
(8) DC input terminals (PV+/PV–)
(7) Ventilation valve
(11) Ground point
(12) AC output port (AC)
Advertisement
Related Manuals for Huawei SU2000L-CN
Summary of Contents for Huawei SU2000L-CN
- Page 1 4. Before installing the device, check that the package contents are intact and complete against the packing list. If any damage is found or any component is missing, contact your supplier. 5. Huawei shall not be liable for any consequence caused by violation of the storage, transportation, installation, and operation regulations specified in this document and the user manual.
- Page 2 Wall-mounted Installation DANGER Avoid drilling holes in the utility pipes and/or cables attached to the back of the wall. Installing the SUN2000L 1. Install the SUN2000L on the mounting bracket. 2. Tighten screw assemblies. 3. (Optional) Install an anti-theft lock. NOTICE If the bottom of the ...
- Page 3 1. Connect the AC output power cable to the AC connector. Three-Core Cable (L, N, and PE) Click Two-Core Cable (L and N) Click 2. Connect the AC connector to the AC output port. 3. Check the route of the AC output power cable. To remove the AC connector from the SUN2000L, perform the operations in reverse order.
- Page 4 0.1s, then off for 0.1s, then on for 0.1s, and is limited. finally off for 1.7s. Huawei Industrial Base, Bantian, Longgang Blinking: The period is 2s. The LED is on for The SUN2000L has connected to the Shenzhen 518129 People's Republic of China 0.1s and then off for 1.9s.