Installing The Battery; Solid State Drive - Optional; Removing The M.2 Solid State Drive - Ssd - Dell Precision 3530 Service Manual
Hide thumbs
Also See for Precision 3530:
- Setup and specifications manual (37 pages) ,
- Installation manual (15 pages) ,
- Owner's manual (136 pages)
Table of Contents
Advertisement
Installing the battery
NOTE:
the 92Whr battery requires the use of a M.2 card and a 68Whr battery can be used with either a M.2 or 7mm SATA drive.
1
Insert the battery into the slot on the laptop.
NOTE:
Route the battery cable below the battery routing channels to enable proper connection to the connector.
2
Connect the battery cable to the connector on the system board.
3
Tighten the M2.5x5 screw (2) to secure the battery to the laptop.
4
Install the
base
cover.
5
Follow the procedure in
Solid State Drive — optional
Removing the M.2 Solid State Drive - SSD
1
Follow the procedure in
2
Remove the:
a
base cover
b
battery
3
To remove the SSD:
a
Remove the one M2x3 screw [1] that secures the SSD bracket to the laptop and lift the SSD frame [2] that secures the SSD
card to the system board. .
b the SSD that secures the SSD card to the system board .
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
17
Advertisement
Table of Contents
