Table of Contents
Advertisement
USE & OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)
TEMPERATURE / TIMER SET CONTROLS
•
Used for adjusting the timer and thermostat.
•
The default display is setting temperature.
•
In cooling mode, when + or - button is pressed, the set temperature is displayed and may be
adjusted. After 10 seconds the display will revert back to room temperature. Temperature is only
adjustable in cool mode. The time is adjustable between 1 - 24 hours.
Note: By pressing both + or - buttons at the same time, the display will toggle between
Celsius(°C) and Fahrenheit(°F).
WARNING LIGHT
Condensation may accumulate in the unit.
If the internal tank becomes full, the Power Control light will flash and the unit will not operate until
the unit has been drained (refer to Water Condensation Drainage).
After switching the air conditioner off, you must wait 3 minutes before switching it back on again.
EN
8
Advertisement
Table of Contents
