Related Manuals for Beko CM 7107
Summary of Contents for Beko CM 7107
- Page 1 Washing Machine User Manual CM 7107 Document Number: 2820530914_EN/ 25-01-23.(11:01)
-
Page 2: General Safety Instructions
1 General safety instructions • Do not force open the locked loading door. The door will This section includes security open immediately after the instructions which may help prevent washing cycle has ended. If the the injuries and material damage risks. door does not open, apply the All kinds of warranties shall be invalid if solutions provided for “Loading... -
Page 3: Children's Safety
1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used room where the product is by children at and above 8 located. years old and by persons •... -
Page 4: Important Instructions For Environment
This product has been manufactured with high DANGER quality parts and materials which can be reused and are suitable for recycling. Do not dispose • Do not wash the product by of the waste product with normal domestic spraying or pouring water onto and other wastes at the end of its service life. -
Page 5: Technical Specifications
4 Technical specifications Supplier name or trademark Beko CM 7107 Model name 7158641800 Rated capacity (kg) Maximum spin speed (rpm) 1000 Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet • / - • Available... -
Page 6: Appropriate Installation Location
4.1 Installation • Leaving a gap at the sides of the machine is suggested to reduce vibration and noise INFORMATION • On a graduated floor, do not place the product next to the edge or on a platform. • Your washing machine automatically •... -
Page 7: Connecting Water Supply
4.1.4 Connecting water supply INFORMATION • It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher. CAUTION! •... -
Page 8: Electrical Connection
1 Loosen the lock nuts on the feet by hand. and Environment Instructions” and the instructions in the “Installation” section. 2 Adjust the feet until the product stands in a stable and balanced way. To prepare the product for washing laundry, perform first operation in Drum Cleaning 3. -
Page 9: Loading The Laundry
4.2.5 Correct load capacity • Only use the dyes / colour changers and descaling agents which are appropriate The maximum load capacity depends on the for machine wash. Always follow the type of laundry, the degree of soiling and the instructions on the package. - Page 10 Using softeners • Do not select a programme with prewash if you are using a detergent bag or dispensing Pour the softener into the softener ball. Place the detergent bag or the dispensing compartment of the detergent drawer. ball directly among the laundry in the product. •...
- Page 11 If the product does not contain a liquid Using bleaches detergent cup: • Select a programme with prewash and add the • Do not use liquid detergent for the prewash bleach at the beginning of the prewash. Do not in a programme with prewash. put detergent in the prewash compartment.
-
Page 12: Tips For Efficient Washing
4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woollens/Silks (Recommended (Recommended (Recommended temperature (Recommended temperature temperature range temperature range range based on soiling level: range based on soiling level: based on soiling based on soiling 40-90 oC) cold-40 oC) level: cold -40 oC) -
Page 13: Operating The Product
4.3 Operating the product 1 - Programme Selection Knob (Uppermost position On / Off) 4.3.1 Control panel 2 - Display 3 - End Time Adjustment Button 4 - Programme Follow-up Indicator 5 - Start/Pause Button 6 - Auxiliary Function Button 3 7 - Auxiliary Function Button 2 8 - Auxiliary Function Button 1 9 - Spin Speed Adjustment Button... - Page 14 • : Selectable * : Automatically selected, cannot be cancelled. ***: Eco 40-60 with 40 °C temperature selection is the test programme in accordance with EN 60456:2016/A11:2020 and energy label with Commission Delegated Regulation (EU) 2019/2014 - : See the programme description for maximum load. INFORMATION •...
-
Page 15: Main Programmes
4.3.5 Main programmes ( היגיינהHygiene+) • + Depending on the type of fabric, use the Applying a steam step at the beginning of the following main programmes. programme allows to soften the dirt easily. • ( כותנהCottons) Use this programme for your laundry (baby clothes, bed sheets, bedlinen, underwear, etc. -
Page 16: Special Programmes
40 ( מעורבתMix 40) • When the quick function is selected: You can use this programme to wash cottons and Blood Fruit juice synthetics together without the need to sort them. Chocolate Ketchup Pudding Red Wine Curry • ( חולצותShirts) This programme is used to wash the shirts Coffee Coal... - Page 17 4.3.10 Auxiliary function selection If you only want to drain the water without spinning the laundry, select the “Spin+Pump programme, Select the desired auxiliary functions before and use the Spin Speed Adjustment button to starting the programme. You can also select select the No Spin function.
-
Page 18: Functions/Programmes Selected By Pressing The Function Buttons For 3 Seconds
4.3.10.2 Functions/Programmes To disable Child Lock: Selected by Pressing the Function Press and hold the Auxiliary Function button 2 for 3 seconds while the programme is running. Buttons for 3 Seconds While you’re holding the button pressed for 3 seconds, C03, C02 and C01 will be displayed respectively. - Page 19 4.3.13 Progress of programme 4. Press the Start/Pause button. The delayed end time you have set will be displayed. Countdown Progress of a running programme can be will start for delayed end. On the display, “_” will followed from the Programme Follow-up move up and down next to the delayed end time.
-
Page 20: Cancelling The Programme
Opening the loading door in case of power 4.3.15 Changing the selections failure: after programme has started Switching the machine to pause mode INFORMATION Press the Start/Pause to switch the machine to pause mode while a programme is running. • In case of a power failure, you can use the The light of the current programme will flash on loading door emergency handle under the pump the Programme Follow-up indicator, indicating... -
Page 21: Maintenance And Cleaning
4.4 Maintenance and cleaning When you turn the Programme Selection knob, the machine will end the programme but will not Service life of product extends and frequently discharge the water inside. When you select experienced problems will be reduced if it is and start a new programme, the newly selected cleaned at regular intervals. -
Page 22: Cleaning The Body And Control Panel
4.4.5 Draining remaining water INFORMATION and cleaning the pump filter The filter system in your machine prevents • Foreign metal substances will cause rust solid items such as buttons, coins and fabric stains in the drum. Clean the stains on the fibres clogging the pump impeller during drum surface by using cleaning agents for discharge of washing water. -
Page 23: Troubleshooting
5 Troubleshooting 3 Follow the below procedures in order to drain water. Programmes do not start after the loading door is The product has an emergency water draining closed. hose, in order to drain the water: • Start / Pause / Cancel button is not pressed. >>>Press Start / Pause / Cancel button. - Page 24 Loading door cannot be opened. Washing performance is poor: Laundry turns gray. (**) • Loading door lock is activated because of the water level in • Insufficient amount of detergent has been used over a long the product. >>>Drain the water by running the Pump or period of time.
- Page 25 Washing machine does not rinse well. Too much foam forms inside the product. (**) • The amount, brand and storage conditions of the detergent • Improper detergents for the washing machine is used. used are inappropriate. >>>Use a detergent appropriate >>>Use detergents appropriate for the washing machine.
- Page 26 Beko, and will void the warranty of the product. Therefore, it is highly recommended that end-users refrain from the attempt to carry out repairs falling outside the mentioned list of spare parts, contacting in such cases authorized professional repairers or registered professional repairers.