hit counter script
AEG FSK94858P User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Dishwasher
  5. FSK94858P
  6. User manual
AEG FSK94858P User Manual

AEG FSK94858P User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
aeg.com/register
EN User Manual | Dishwasher
FSK94858P
aeg.com\register

Advertisement

Table of Contents
loading

Related Manuals for AEG FSK94858P

Summary of Contents for AEG FSK94858P

  • Page 1 EN User Manual | Dishwasher FSK94858P aeg.com\register...

  • Page 2: Table Of Contents

    FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 My AEG Kitchen app ENGLISH...

  • Page 4: Safety Information

    SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 5: Safety Instructions

    similar accommodation where such use does not exceed (average) domestic usage levels. • Do not change the specification of this appliance. • The operating water pressure (minimum and maximum) must be between 0.05 (0.5) / 1 (10) MPa (bar). • Follow the maximum number of 14 place settings. •...
  • Page 6 • Warning: this appliance is designed to be installed / connected to a grounding connection in the building. • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. • Always use a correctly installed shockproof socket.

  • Page 7: Installation

    Refer to Safety chapters. 3.1 Building in min. 560 www.youtube.com/electrolux www.youtube.com/aeg How to install your AEG/Electrolux 60 cm Sliding Door Dishwasher 1240 3.2 Safety caps If the furniture panel is not installed, open the appliance door carefully to avoid the risk of injury.
  • Page 8 appliance and may cause an injury. If the plastic cover is damaged, contact the Authorized Service Centre to replace it with the new one. 5 mm ENGLISH...

  • Page 9: Product Description

    Scan the QR code with the camera on your mobile device to be redirected to My AEG The lamp goes off when you close the door or Kitchen app in the app store. Follow the switch the appliance off.

  • Page 10: Control Panel

    5. CONTROL PANEL On/Off button / Reset button Option buttons (EXTRAS) Delay start button / Remote start button AUTO Sense program button Display MY TIME program selection bar 5.1 Display The ECOMETER indicates how the programme selection impacts energy and The display shows the following information: water consumption.

  • Page 11: Programme Selection

    45 °C. 6.2 AUTO Sense 6.4 Extras in the app The AUTO Sense programme automatically My AEG Kitchen app provides additional adjusts the dishwashing cycle to the type of dishwashing options. To access all options, load.
  • Page 12 connect your dishwasher to the app. See chapter "Wireless connection". 6.5 Programmes overview Programme Dishwasher Degree of Programme phases EXTRAS load soil Quick Crockery, cutlery Fresh • Dishwashing 50 °C • ExtraPower • Intermediate rinse • GlassCare • Final rinse 45 °C •...

  • Page 13: Basic Settings

    Intermediate rinse • Final rinse • AirDry Automatic door opening during the drying phase. Refer to "Basic settings". Available only through My AEG Kitchen app. Available only through My AEG Kitchen app. Consumption values Water (l) Energy (kWh) Duration (min)
  • Page 14 Settings Values Description End sound Activate or deactivate the acoustic signal for the end of a OFF (default) programme. Auto door open ON (default) Activate or deactivate AirDry. Key tones ON (default) Activate or deactivate the sound of the buttons when pressed.
  • Page 15 Use OK to enter the selected setting and to 4. Press OK to confirm the setting. confirm changing its value. • The new setting is saved. • The appliance returns to the basic settings list. How to enter setting mode 5.
  • Page 16 Regardless of the type of detergent used, additional 4 litres and the total energy set the proper water hardness level to consumption of a programme by additional 2 keep the salt refill indicator active. Wh. The rinsing of the softener ends with a complete drain.

  • Page 17: Wireless Connection

    It 8. WIRELESS CONNECTION You can connect your dishwasher to the functionality allows you to remotely control home wireless network and then link it to your and monitor your dishwasher. mobile devices in My AEG Kitchen app. This ENGLISH...
  • Page 18 • Mobile device connected to the wireless network. 8.4 How to reset the network credentials 1. Launch My AEG Kitchen app on your mobile device and follow the instructions If you want to connect to a different wireless in the app. When prompted in the app,...

  • Page 19: Before First Use

    9. BEFORE FIRST USE 1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4.

  • Page 20: Daily Use

    9.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid designed specifically for dishwashers. 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation.
  • Page 21 How to activate the remote start 10.2 Using the detergent Make sure that the indicator is on and your dishwasher is added in My AEG Kitchen app. If not, refer to "Wireless connection". 1. Press • The light related to the button is on.
  • Page 22 How to deactivate the remote start Not all options are compatible with each Press until the display shows 0h. other. • The light related to the button is off. • The indicator is off. • The indicator is on. Activating options often increases the •...

  • Page 23: Hints And Tips

    10.10 How to cancel a running progress of the wash cycle. The length of the programme bar decreases along with the programme duration. After closing the door, the wash cycle resumes from the point of interruption. Press and hold for about 3 seconds. The appliance returns to the programme Opening the door while the remote start is selection.
  • Page 24 • Do not pre-rinse dishes by hand. It hard-water filming or spotting on the items. increases the water and energy Using too much detergent with soft or consumption. When needed, select a softened water results in detergent programme with a prewash phase. residues on the dishes.

  • Page 25: Care And Cleaning

    11.5 Loading the baskets • Move the upper basket upwards to accommodate large items in the lower • Always use the whole space of the basket. baskets. • Make sure that the spray arms can move • Use the appliance to wash dishwasher- freely before you start a programme.
  • Page 26 12.2 Internal cleaning • Clean the appliance interior with a soft damp cloth. • Do not use abrasive products, abrasive cleaning pads, sharp tools, strong chemicals, scourer or solvents. • Wipe clean the door, including the rubber gasket, once a week. •...
  • Page 27 CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 12.6 Cleaning the lower spray arm We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results.
  • Page 28 4. To install the spray arm back, press the spray arm upwards and simultaneously turn it counterclockwise until it locks into place. 12.7 Cleaning the upper spray arm We recommend to clean the upper spray arm regularly to prevent soil from clogging the holes.

  • Page 29: Troubleshooting

    5. To install the spray arm (C) back, insert the mounting element (B) in the spray arm and fix it in the delivery tube (A) by turning it clockwise. Make sure that the mounting element locks into place. 13. TROUBLESHOOTING Refer to the below table for information on WARNING! possible problems.
  • Page 30 Problem and alarm code Possible cause and solution The anti-flood device is on. • Close the water tap and contact an Authorised Service Centre. The display shows , Error i30 and Risk of flood detected. Malfunction of the water level detec‐ •...
  • Page 31 Problem and alarm code Possible cause and solution The appliance door opens during • The AirDry function is activated. You can deactivate the function. Refer the wash cycle. to "Basic settings". Rattling or knocking sounds from • The tableware is not properly arranged in the baskets. Refer to basket the inside of the appliance.
  • Page 32 Problem Possible cause and solution Poor drying results. • Tableware was left for too long inside the closed appliance. Activate the function AirDry to set the automatic opening of the door and to improve the drying performance. • There is no rinse aid or the dosage of rinse aid is not sufficient. Fill the rinse aid dispenser or set the dosage of rinse aid to a higher lev‐...
  • Page 33 Problem Possible cause and solution Limescale deposits on the tableware, • The level of salt is low, check the refill indicator. on the tub and on the inside of the • The cap of the salt container is loose. door. •...

  • Page 34: Technical Information

    Problem Possible cause and solution The app cannot connect to the dish‐ • There is a trouble with the wireless network signal. Check your wire‐ washer. less network and router. Restart the router. • Check if your mobile device is connected to the network. •...
  • Page 35 your local recycling facility or contact your appliances marked with the symbol with municipal office. the household waste. Return the product to ENGLISH...
  • Page 36 My AEG Kitchen app The software in this product contains components that are based on free and open source software. AEG gratefully acknowledges the contributions of the open software and robotics communities to the development project. To access the source code of these free and open source software components whose license conditions require publishing, and to see their full copyright information and applicable license terms, please visit: http://aeg.opensoftwarerepository.com (folder NIUS)

Table of Contents