Table of Contents
Troubleshooting
Related Manuals for Toro Recycler 21060
Summary of Contents for Toro Recycler 21060
- Page 1 Electric - Recycler ® 34 cm / 40 cm Model Model 34 cm 34 cm 21060, 21061, 21062 21060, 21061, 21062 40 cm 40 cm 21070, 21071, 21072 21070, 21071, 21072 Operator's Manual Operator's Manual © 1998 by The Toro Company...
- Page 2 General Maintenance and Upkeep Safety Spare Parts and Troubleshooting Assembly and Start-up Hints on Tending the Lawn Operation © 1998 by TORO Company...
- Page 3 2800 min The TORO lawn mower has been designed for the private use in vibrations on the the garden. Lawn mowers for the private garden are units which are - as a rule - in use for not more than 50 hours per year, and...
- Page 4 EC Declaration of Conformity to Directives Certificate of Conformity 89/392, 91/368, 93/44, 93/68, 89/336, 73/23 (EN60335) Conforms to the Specifications of Directive 84/538/EEC Manufacturer The Toro Company, 8111 Lyndale Ave.So., Bloomington, MN 55420-1196, USA ® Product Name Toro Recycler Serial Number...
- Page 5 5. With a wheeled rotary mower you should always mow TORO cables conform to this requirement. Check the cable 3. Do not start the mower in close proximity to children and sideways to the slope, never up and down.
- Page 6 Keep hands and feet off Warning! Danger of electric shock Keep dry Disconnect mains plug before servicing the cutting tool If the blade catches or cuts the cord, immediately unplug the cable from the outlet. © 1998 by The Toro Company...
-
Page 7: Assembly And Start-Up
For mowing with the grass collecting device or if a deposition ® of the grass is desired, remove the Recycler plug Cable strain relief Protects plug-in socket and socket connection from extreme pull 10 Carrying handles © 1998 by The Toro Company... - Page 8 4. Fasten the upper part of the handlebar by screwing down the butterfly nut fingertight. 5. Adjust the height of the handlebar with the tommy nuts on the mower housing - asdjusting range approx. 10 cm (Fig.7). © 1998 by The Toro Company...
- Page 9 1. First push the mower onto the lawn - the scale must be parallel to the ground. 2. Now you can read the length of the uncut grass on the scale and choose the recommended adjustment. setting height-of-cut B - F © 1998 by The Toro Company...
- Page 10 If using a cable drum, unwind the cable completely, otherwise the cable drum might heat up to an unacceptable extent. Disconnect the mains plug when leaving the mower. Do not take the mains plug of the socket by pulling on the cable. © 1998 by The Toro Company...
-
Page 11: Operation
The cutter will coast for a short time. Do not touch underneath the mower. Turn the mower off when driving off the lawn. Wait until the cutters stand still and disconnect the mains plug before transporting or lifting the mower. © 1998 by The Toro Company... - Page 12 Then mow with the usual adjustment. Lumpy grass and chockings inside the mowing channel effect a throttling or stop of the motor. In such cases, you should mow at least one step higher. © 1998 by The Toro Company...
- Page 13 Disconnect the mains plug when leaving the mower. Remove the grass-collecting device and tilt it a bit to the back so that no grass will fall out. Dump the full grass-collecting device by shaking it slightly (Fig. 23). © 1998 by The Toro Company...
- Page 14 - danger of injury! Mowing without the grass-collecting device is recommended for mowing high grass or if no grass collection is desired. Remove the grass-collecting device and the Recycler-plug (Fig. 24 + 25). © 1998 by The Toro Company...
-
Page 15: Maintenance And Upkeep
Operate the mower only with perfect cutters! Only use original TORO spare parts or parts released by TORO. © 1998 by The Toro Company... - Page 16 Clean the mower. Check all bolts, screws and nuts. Replace damaged parts. Use only original TORO spare parts resp. go to a specialized TORO-dealer. Store the mower in a clean, dry place. The handlebar may be folded down for this purpose (Fig. 29).
-
Page 17: Spare Parts And Troubleshooting
6.4.3 Bag & Recycling Parts 6.4.4 Handle Parts Hints on spare parts ordering Use only original TORO spare parts or parts released by the manufacturer. This is the only way to guarantee for your safety and the safety of others. -
Page 18: Troubleshooting
1. Tighten the cutter screw with 15 Nm. Motor vibrates or runs erratically. 1. Cutter screw is loose. 2. Have the cutter balance checked at a TORO customer service station. 2. Cutter is not balanced. 1. Increase cutting height. Mow at a slower walking pace. - Page 19 95-6767 Retainer-Blade 95-6767 Retainer-Blade 95-6743 Screw-Blade 95-6743 Screw-Blade 95-6619 Snap on Nut- 95-6619 Snap on Nut- shroud shroud 95-6623 Screw 95-6623 Screw 92-2289 Plate-Logo 92-2289 Plate-Logo 95-6532 Screw 95-6532 Screw 95-6692 Release-Cable 95-6692 Release-Cable © 1998 by The Toro Company...
-
Page 20: Chassis Parts
95-6560 Srew 95-6560 Srew 95-6521 Decal 95-6527 Decal Recycler 34cm Recycler 40cm 95-6666 Smartwheel 95-6666 Smartwheel Assy. (incl. Ref. Assy. (incl. Ref. 6 & 7) 6 & 7) * not illustrated * not illustrated © 1998 by The Toro Company... - Page 21 95-6555 Ramp-Bag 95-6554 Ramp-Bag 95-6572 Decal-Safety 95-6572 Decal-Safety 95-6774 Manual-GB 95-6770 Bushing- 65-6773 Manual- Rear Door German/ Dutch/ 95-6774 Manual-GB French/ Italien 65-6773 Manual- German/ Dutch/ French/ Italien * not illustrated * not illustrated © 1998 by The Toro Company...
-
Page 22: Handle Parts
95-6598 Srew Switch 65-6684 Cord-Power Assy. 95-6598 Srew Switch Assy. 95-6596 Mount-Bail 95-6598 Screw-Mount 95-6596 Mount-Bail 95-6535 95-6598 Screw-Mount 95-6529 Bail 95-6607 95-6606 Bail 95-6602 Clamp-Bail 95-6597 Cable Holder 95-6602 Clamp-Bail 95-6597 Cable Holder © 1998 by The Toro Company... -
Page 23: Hints On Tending The Lawn
This are available, which are also manufactured by TORO. These fertilization is to be repeated according to the demands you make sprinkling systems work automatically, however, they are also on your lawn. - Page 24 The Toro Company, 8111 Lyndale Ave. So. , Bloomington, MN 55420 - 1196, USA 95-6774...