Related Manuals for Beko CM 8100 B
Summary of Contents for Beko CM 8100 B
- Page 1 Washing Machine User Manual CM 8100 B Document Number : 2820529688_EN/ 16-02-22.(16:12)
-
Page 2: Explanation Of Symbols
Please read this user manual first! Dear Customer, Thank you for selecting a Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product. -
Page 3: General Safety Instructions
General safety instructions This section contains safety instructions that will help protect from risk of personal injury or property damage. Our company shall not be liable for any damages that may arise in case of failure to follow these instructions. Always have the installation and repairing procedures carried out by the Authorised Service Agent. -
Page 4: Electrical Safety
Children should not perform cleaning and user maintenance works without an adult’s supervision. Keep packaging materials away from children. Danger of injury and drowning. Keep all detergents and additives used for the product away from children’s reach. Cut the power cable and break and deactivate the locking mechanism of the loading door before disposing of the product for children’s safety. -
Page 5: Installation Safety
1.5 Installation Safety Check the information on the manual and installation instructions to prepare the product for installation and make sure the electrical mains, clean water mains and water outlet are suitable. If not, call a qualified electrician and plumber to have them make the necessary arrangements. These operations are the responsibility of the customer. -
Page 6: Usage Safety
Do not install the product behind a door, a sliding door or at another location that will prevent the door from opening completely. If a drier is to be placed on the product, fix with a suitable connection apparatus obtained from the authorized service. There is a risk of contact with electrical pieces when the upper trays is removed. - Page 7 Do not place your hand or a metal object under the washing machine. If washing laundry at high temperatures, the discharged washing water would burn your skin if in contact with your skin, for ex. When the discharge hose is connected to the tap. Do not touch the discharge water. Take the following precautions to prevent formation of biofilm and malodours: - Make sure the room where the washing machine is placed is well ventilated.
-
Page 8: Important Instructions For Environment
Important instructions for environment 2.1 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. -
Page 9: Technical Specifications
Technical specifications Supplier name or trademark Beko CM 8100 B Model name 7131820300 Rated capacity (kg) Maximum spin speed (rpm) 1000 Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet • / - • Available... -
Page 10: Appropriate Installation Location
4.1 Installation Please read the “Safety Instructions” section first! Your washing machine automatically detects the amount of laundry placed inside when selecting a program. While installing the product, before the first use, calibration should be done to ensure that the laundry amount is detected in the most accurate way. -
Page 11: Removing Transportation Safety Bolts
4.1.2 Assembly of bottom panel covers • In order to increase the sound comfort of the product, attach cover A after removing the package foam. Tilt the machine back slightly. Rest the tabs of Cover A against the Cover A lower panel. -
Page 12: Connecting To Water Supply
4.1.4 Connecting to water supply Models with a single water inlet shall not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate. WARNING Do not use old or used water inlet hoses on a new product. -
Page 13: Adjusting The Feet
hose and the drain hose of the product with a suitable clamp so that it does not come off and cause leaks. 4.1.6 Adjusting the feet In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced on its feet. Ensure that the product is balanced by adjusting the feet. -
Page 14: Preparing Laundry For Washing
4.2 Preparation Please read the “Safety Instructions” section first! 4.2.1 Sorting the laundry • Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature. • Always observe the instructions given on the garment care labels. 4.2.2 Preparing laundry for washing •... -
Page 15: Using Detergent And Softener
4.2.6 Using detergent and softener Read the manufacturer instructions on the package while using detergents, softeners, starch, bleach and decolourants, anti- WARNING limescale and follow the dosage information provided. Use a measuring cup, if any. The detergent drawer comprises of three compartments: –... -
Page 16: Using Liquid Detergents
Using liquid detergents If the product has a liquid detergent apparatus • Press and rotate the apparatus at where it is shown when you want to use liquid detergents. The part falling below will serve as a barrier for liquid detergent. •... -
Page 17: Tips For Efficient Washing
4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woollens/Silks (Recommended (Recommended (Recommended temperature (Recommended temperature temperature range temperature range range based on soiling level: range based on soiling level: based on soiling level: based on soiling level: 40-90 oC) cold -40°C) cold -40°C) -
Page 18: Operating The Product
4.3 Operating the product Please read the “Safety Instructions” section first! 4.3.1 Control panel 1 - Programme Selection knob 7 - End Time Setting button 2 - Temperature level lights 8 - Auxiliary Function button 3 3 - Spin level indicator lights 9 - Auxiliary Function button 2 4 - Display 10 - Auxiliary Function button 1... -
Page 19: Programme And Consumption Table
4.3.3 Programme and consumption table Auxiliary functions Selectable temperature Programme (°C) range °C Cold - 90 2,75 1000 • • • • • Pamuklu Cold - 90 2,00 1000 • • • • • Cold - 90 1,10 1000 • •... -
Page 20: Programme Selection
The auxiliary functions in the table may vary according to the model of your machine. Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage. You can see the washing duration on the display of your machine while selecting a programme. - Page 21 4.3.5 Programmes • Eko 40-60 (Eco 40-60) The Eco 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle, and that this programme is used to assess the compliance with the EU ecodesign legislation.
- Page 22 • Buharlı Havalandırma ( SteamTherapy) Use this programme to reduce the creases and ironing times of a small amount of unspotted cotton, synthetic or mixed laundry. Curtain) • Perde ( You can use this programme to wash your tulles and curtains. As their meshed texture causes excessive foaming, put little amount of detergent into the main wash compartment.
-
Page 23: Temperature Selection
Below you can find the soil groups that can be selected with the “Quick Wash” setting button: When “Quick Wash” is not When the “Quick Wash” button When the “Quick Wash” button selected is pressed once is pressed twice Sweat Blood Collar soil Chocolate... -
Page 24: Spin Speed Selection
You can also change the temperature after the washing starts. This change can be made if the washing steps allow it. Changes cannot be made if the steps do not allow it. If you scroll to cold wash option and press Temperature Adjustment button again, the recommended maximum temperature for the selected programme appears on the display. -
Page 25: Auxiliary Functions
When an auxiliary function button that cannot be selected with the current programme is pressed, the washing machine will make a warning sound. Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before starting the machine, the function selected first will be cancelled and the second auxiliary function selection will remain active. -
Page 26: Functions/Programmes Selected By Pressing The Function Keys For 3 Seconds
4.3.8.2 Functions/Programmes Selected by Pressing the Function Keys for 3 Seconds • Drum Clean Press and hold the auxiliary function button 1 for 3 seconds to select the programme. Use regularly (once in every 1-2 months) to clean the drum and provide the required hygiene. Steam is applied before the programme to soften the residues in the drum. -
Page 27: Time Display
To deactivate bluetooth connection: Press and hold Remote Control function button for 3 seconds. Countdown “3-2-1” will be displayed, and then Bluetooth icon will disappears on the display. First setup of the HomeWhiz application must be complete for the bluetooth connection to be activated. After setup, pressing the remote control function button while the knob is at Download Programme/Remote Control position will automatically activate the bluetooth connection. -
Page 28: Loading Door Lock
4 Programme follow-up indicator lights on the display will show the current programme step. 4.3.11 Loading door lock There is a locking system on the loading door of the machine that prevents opening of the loading door in cases when the water level is unsuitable. "Door Locked"... -
Page 29: Switching The Machine To Pause Mode
4.3.12 Changing the selections after programme has started Adding laundry after the programme has started If the water level in the machine is suitable when you press Start/Pause button, the door lock will be deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off when the door lock is deactivated. -
Page 30: End Of Programme
4.3.14 End of programme End symbol appears on the display when the programme is completed. If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all indicators are turned off. Completed programme steps will be displayed if you press On/Off button. 4.3.15 HomeWhiz Feature and Remote Control Function HomeWhiz allows you to use your smart device to check your washing machine and get information about its status. - Page 31 • Return to the HomeWhiz application and wait until the setup is complete. When setup is complete, give your washing machine a name. Now, you can tap and see the product you have added in the HomeWhiz Aplication. If you cannot successfully perform the setup within 5 minutes, your washing machine will turn off automatically. In this case, you will have to start over the setup procedure.
- Page 32 When the Remote Control is on, you can only manage, turn-off and status follow-up operations through your washing machine. And all functions except child lock can be managed through the application. You can follow whether the Remote Control function is On or Off through the function indicator on the button. If the Remote Control function is Off, all the operations are handled on the washing machine and only status follow-up is allowed on the application.
-
Page 33: Maintenance And Cleaning
4.4 Maintenance and cleaning Please read the “Safety Instructions” section first! Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals. 4.4.1 Cleaning the detergent drawer Clean the detergent drawer at regular intervals (every 4-5 washing cycles) as shown below in order to prevent accumulation of powder detergent in time. -
Page 34: Draining Remaining Water And Cleaning The Pump Filter
4.4.5 Draining remaining water and cleaning the pump filter The filter system in your machine prevents solid items such as buttons, coins and fabric fibres clogging the pump impeller during discharge of washing water. Thus, the water will be discharged without any problem and the service life of the pump will extend. -
Page 35: Troubleshooting
Troubleshooting Please read the “Safety Instructions” section first! Problem Cause Solution Programmes do not start after the Start / Pause / Cancel button is not pressed. • Press Start / Pause / Cancel button. loading door is closed. It may be difficult to close the loading door in case of •... - Page 36 Problem Cause Solution Washing takes longer than Water pressure is low. • Product waits until taking in adequate amount specified in the user manual.(*) of water to prevent poor washing quality due to the decreased amount of water. Therefore, the washing time extends.
- Page 37 Problem Cause Solution Washing performance is poor: Insufficient amount of detergent is used. • Use the recommended amount of detergent Stains persist or the laundry is not appropriate for water hardness and the laundry. whitened. (**) Excessive laundry is loaded in. •...
- Page 38 Problem Cause Solution Detergent residue in the detergent Detergent was put in wet drawer. • Dry the detergent drawer before putting in drawer. (**) detergent. Detergent has gotten damp. • Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.