Table of Contents
Advertisement
CONTROL PANEL
SETTING THE TIMEOUT TIME
1
In the Keypad settings submenu, find the Timeout
time subpage (P6.6.3) with the Browser buttons.
2
To go to the Edit mode, push the Menu button
Right.
3
To set the timeout time, use the Browser buttons.
4
To accept the change, push the Enter button.
NOTE!
If the Default page value is 0, the Timeout time setting has no effect.
7.9.6.4
Contrast adjustment (P6.6.4)
If the display is not clear, you can adjust its contrast with the same procedure as that for the
timeout time setting (see Chapter 7.9.6.3 Timeout time (P6.6.3)).
7.9.6.5
Backlight time (P6.6.5)
You can set the time the backlight stays on until it goes off. You can select a value between 1
and 65535 minutes or 'Forever'. For the value setting procedure, see Chapter 7.9.6.3 Timeout
time (P6.6.3).
7.9.7
HARDWARE SETTINGS
NOTE!
Use a password to go the Hardware settings submenu (see Chapter 7.9.5.1
Password (S6.5.1)). Keep the password in a safe location!
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
READY
I/O term
Timeout time
90 s
READY
I/O term
Timeout time
90 s.
READY
I/O term
Timeout time
60 s.
VACON · 107
7
Advertisement
Table of Contents
