Page 1
SMART Hi-Fi AUDIO Wireless Multi-room Model : NP8350 / NP8350W NP8350B / NP8350D ENGLISH | SIMPLE MANUAL The actual product may differ from the image. P8350B-M0.BUSALLK_SIM_MFL69154860.indd 1 2015-07-24 8:59:36...
Page 2
Getting Started Getting Started Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of...
Getting Started NOTICE: For safety marking information including product identification and supply ratings, please refer to the main label on the bottom or rear of the apparatus. CAUTION : Only use the AC adapter supplied with this device. Do not use a power supply from another device or another manufacturer.
Getting Started IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Page 5
Getting Started FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 6
CAUTION: Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments. Responsible Party : LG Electronics USA, Inc. 1000 Sylvan Avenue Englewood Cliffs, NJ 07632 TEL. : +1-800-243-0000 P8350B-M0.BUSALLK_SIM_MFL69154860.indd 6 2015-07-24...
Table of Contents Table of Contents Getting Started Safety Information – IMPORTANT SAFETY INSTRUCTIONS Unpacking Product Overview Charging the Unit Basic Operations – Using 1/! button – Changing the mode Using Multi-Room Multi-Room Network Setup – Step 1. Home Network Requirement –...
Page 8
Specification Open source software notice y To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit. y Depending on the region, Music Flow Player application and series of MUSICflow product, some of the content in this manual may differ.
Getting Started Unpacking AC Adapter Simple manual Unit Product Overview a 1/! (Standby/On) b F (Function): Selects the function and input source. c -/+ (Volume) (Play/Pause): Starts playback or pauses playback. e Speaker (Wi-Fi): Connects initial MUSICflow product to your network wirelessly.
Getting Started Charging the Unit This unit uses built-in battery. Before using it, charge the battery by connecting the AC Adapter. Checking the charging Approx. status 3 hours Charging : 1/! button turns red. Fully charged : 1/! button turns white. , Note How to check the battery life: when the unit is turned on, press the 1/!
Using Multi-Room Using Multi-Room Multi-Room Network Setup Step 1. Home Network Requirement a Make sure that wireless network environment using a router is installed at your home. The home router should be connected to the internet. b Connect your smart device to your home network. c Connect the speaker to the power supply.
Using Multi-Room Step 2. Installing “Music Flow Player” App and Media Server Installing “Music Flow Player” App Download “Music Flow Player” on the App store or Google Play Store. Type “Music Flow Player” in the search bar and tap “Search”. Scan the QR code using the scanning application.
Page 13
Media server software allows you to access audio files stored in media server (PC, Mac or Network storage) and enjoy them on your speaker via home networking. On www.lg.com website, type model name in the search bar and find media server software on support tab.
Using Multi-Room Step 3. Initial Multi-Room Setup Wireless connection (Standard Wireless Connection) MUSICflow product offers music streaming service within home router’s Wi-Fi coverage. Connect the one of MUSICflow products (sound bar, speaker or bridge) to the home router wirelessly. (Option) Then you can connect the additional MUSICflow products to your home Wi-Fi network wirelessly.
Page 15
Using Multi-Room Simple Setup Guide (Wireless Connection) 1. Ensure your smart device is connected to your Wi-Fi network. 2. Select the product you want to connect. 3. Launch Music Flow Player App and follow “Wireless Connection” instructions on set-up wizard. 4.
Page 16
Using Multi-Room , Note If you failed for “Wireless connection” configuration. It seems that location is too far from the router, it may not be connected. Place and use it at a location that is close enough to router. m Tip Offers music streaming service in MUSICflow system within home router’s Wi-Fi coverage.
Using Multi-Room Step 4. Adding Speakers (Optional) If you connect the initial MUSICflow product to your home network, you can connect the additional MUSICflow products (sound bar, speaker or bridge) to your home network. Simple Setup Guide (Add Speakers) 1. If you have additional speakers, power on the speaker. 2.
Page 18
Using Multi-Room , Note for Multi-Room Setup y You can make all wireless/wired connection according to the location of the router. But we recommend that you connect the bridge to the router using LAN cable and connect additional speakers for network stability. y When the “Firmware update”...
Using Multi-Room Using the Bridge 1. Use as a root device (wired to the home router) When your home router is located far from speaker location to be connected in wired mode: Connect the bridge to your home router with LAN cable. According to “Simple Setup Guide (Add Speakers)“, add MUSICflow products to your home network.
Using Multi-Room Enjoying Multiple MUSICflow Product 1. Home Cinema Mode Simply add a LG MUSICflow sound bar to your network and synchronize it with your LG MUSICflow speakers to enjoy a home cinema system experience. , Note If you connect the MUSICflow Speakers to your Home Cinema, those speakers must be same model.
Using Multi-Room 2. Grouping Mode Speakers placed in separate rooms can play the same music or different music based on your needs. Synchronize your multi-room speakers together to play the same song in every room. Requirement y More than 2 MUSICflow y Network Bridge (optional) 3.
Bluetooth mode with blue light on F (Function) button. 2. On your Bluetooth device, make sure that Bluetooth is on and select "LG Music Flow H4 (XX)" 3. Play music on your Bluetooth device. P8350B-M0.BUSALLK_SIM_MFL69154860.indd 22 2015-07-24 8:59:43...
Troubleshooting Troubleshooting Troubleshooting Software Update When the MUSICflow product is connected to your home network, check whether the firmware version is the latest on all speakers and the Music Flow Player application. MUSICflow product might require recent firmware to be installed for optimal operation.
Page 24
Troubleshooting 2. If you change the location of the speaker that is in use, 2-1. If the changed location is too far from the home router, it may not be connected. Place and use it at a location that is close enough to router. 2-2.
Page 25
Troubleshooting y If the device with sound source to play (Ex. phone or laptop) is at a place without fluent home router signal, move the corresponding device closer to the home router and try again. 2. If you connected a speaker with a cable and installed other speakers additionally: If the speaker with frequent sound breaking is not close enough with the cable connected speaker, additionally...
Page 26
Troubleshooting y If you are using LG Musicflow PC software, when you designate shared folder, the corresponding folder will be automatically added to Music Library in a minute. LG MUSICflow product is turned off automatically. There are some cases that power off will occur if not receiving...
Page 27
Troubleshooting How can I use Spotify? LG MUSICflow product supports Spotify connect method provided by Spotify. Through this, you can use the function supported by Spotify by connecting to the speaker through Spotify application. If Music Flow speaker is in the network...
Appendix Appendix About Status LED’s Condition Color Status The unit is waiting for Bluetooth pairing (Off ) (Blue) Bluetooth mode Bluetooth connection is paired (Blue) Portable in Portable cable is connected mode (White) The unit is waiting for network connection (Off ) (White) The initial unit is being...
Appendix , Note for Status LED’s Condition y When you set the group at first, F (Function) LED turns green. y The additional groups are set, the F (Function) LED color is changed in group order. [Green > Magenta > Cyan > Blue > Yellow] y If the grouped speakers switch to the network standby mode, the brightness of F (Function) LED gets dark.
Appendix Specification Power supply: - 12 V 0 1.0 A (AC Adapter) - Built-in rechargeable battery Power consumption: 12 W - Networked standby : 3.7 W (If all network ports are activated.) AC Adapter: - Model: WA-12M12FU - Manufacturer: Yang Ming Industrial - Input: AC 100 - 120 V, 50/60 Hz - Output: 12 V 0 1.0 A Dimensions (W x H x D):...
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
Page 32
LG Customer Information Center 1-800-243-0000 USA, Consumer 1-888-865-3026 USA, Commercial Register your product Online! www.lg.com Printed in Indonesia P8350B-M0.BUSALLK_SIM_MFL69154860.indd 32 2015-07-24 8:59:45...