hit counter script

Advertisement

Quick Links

L6SNE47SCE
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Summary of Contents for AEG L6SNE47SCE

  • Page 1 L6SNE47SCE User Manual Washing Machine USER MANUAL...
  • Page 2: Table Of Contents

    18. ENVIRONMENTAL CONCERNS..............39 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 4: Safety Instructions

    This appliance is designed for single household • domestic use in an indoor environment. This appliance may be used in, offices, hotel guest • rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
  • Page 5 ENGLISH the drum to prevent an internal • Make sure not to cause damage to damage. the mains plug and to the mains • Always take care when moving the cable. Should the mains cable need to appliance as it is heavy. Always use be replaced, this must be carried out safety gloves and enclosed footwear.
  • Page 6: Product Description

    • Do not put flammable products or including heat pumps, piping and items that are wet with flammable related equipment including hoses, products in, near or on the appliance. valves, filters and aquastops, printed • Do not wash fabrics which are heavily...
  • Page 7: Technical Data

    ENGLISH 3.2 Appliance overview Worktop Drain hose Detergent dispenser Inlet hose connection Control panel Mains cable Door handle Transit bolts Rating plate Hose support Drain pump filter Feet for levelling the appliance The rating plate reports the model name (A) , product number (B), electrical ratings (C) and serial number (D).
  • Page 8: Installation

    Level of protection against ingress of solid particles IPX4 and moisture ensured by the protective cover, ex‐ cept where the low voltage equipment has no pro‐ tection against moisture Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 10 bar (1.0 MPa)
  • Page 9 ENGLISH 6. Put the appliance back into an We recommend that you upright position. Remove the power keep the packaging and supply cable and the drain hose from the transit bolts for any the hose holder. transport of the appliance. 5.2 Positioning and levelling Adjust the appliance correctly to prevent vibration, noise and movement of the...
  • Page 10 5.3 The inlet hose You can extend the drain hose to maximum 4000 mm. 1. Connect the water inlet hose to the Contact the authorised back of the appliance. service centre for the other 2. Position it toward left or right...
  • Page 11 ENGLISH a loop to prevent particles going into the appliance from the sink. 6. Position the hose directly to a built-in drain pipe in the room wall and tighten it with a clamp. 4. To a stand pipe with vent-hole - Insert the drain hose directly into a drain pipe.
  • Page 12: Accessories

    6.2 Fixing plate kit www.aeg.com/shop or from If you install the appliance on a plinth authorised dealer that is not an accessory supplied by AEG, secure the appliance in the fixing Only appropriate plates. accessories approved by Read carefully the instructions supplied AEG ensure the safety with the accessory.
  • Page 13 ENGLISH 7.2 Display Maximum load indicator. The icon flashes during programme time es‐ timation (refer to "PROSENSE load detection" paragraph). Delay start indicator. Door locked indicator. The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. •...
  • Page 14: Dial And Buttons

    8. DIAL AND BUTTONS 8.1 Zap./Vyp. The display shows only the spin speeds available Pressing this button for a few seconds for the set programme. allows to activate or deactivate the • Activate the Rinse Hold option. appliance. Two different tunes sound The final spin is not performed.
  • Page 15 ENGLISH containing sand, dust , mud and other The display shows the indicator solid particles. (cold), and the indicator The options can increase the spin) and the indicator programme duration. • Activate the spin-only option (Skipping the wash and rinse 8.6 Jemné+ phases): Pouze odstřeďování.
  • Page 16: Programmes

    • If your laundry is normally or lightly This option removes micro-organisms soiled, it may be advisable to shorten thanks to a washing phase with the the washing programme. Touch this temperature maintained above 60°C for button once to decrease the duration.
  • Page 17 ENGLISH Programme Programme description Special programme for one down jackets, synthetic blanket, duvet, bedspread and so on. Péřová bunda Do not use fabric softener and make sure that Outdoor there is no softener residue in the detergent dispenser. Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable fleece or inner insulation.
  • Page 18 Programme Default tempera‐ Reference spin speed Maximum load ture Spin speed range Temperature range 40 °C 1200 rpm 3 kg 60 °C - Cold 1200 rpm - 400 rpm Syntetika 30 °C 1200 rpm 1,5 kg 40 °C - Cold 1200 rpm - 400 rpm Jemné...
  • Page 19 ENGLISH ■ ■ ■ ■ ■ ■ ■ ■ Rinse Hold ■ ■ ■ ■ ■ Extra Silent Pouze vypouštění ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Pouze odstřeďová‐ ■ ■ ■ ■ ■ ■ ■ ■ ■...
  • Page 20: Settings

    Programme Universal Liquid Uni‐ Liquid for col‐ Delicates Special versal oureds woollens powder ▲ ▲ Vlna/Hedvábí 20 min. - 3 kg ▲ ▲ ▲ ▲ ▲ Snadné žeh‐ lení ▲ ▲ Péřová bun‐ Outdoor ▲ ▲ Denim ▲ ▲...
  • Page 21: Before First Use

    ENGLISH 10.3 Acoustic signals and the Odložený start buttons simultaneously for about 6 seconds. This appliance is provided with different If you deactivate the acoustic signals, that operate when: acoustic signals, they • You activate the appliance (special continue operate when the short tune).
  • Page 22 Always obey the instructions that you find on the packaging of the detergent products. Detergent compartment for pre‐ wash phase or soak programme (if available). Add the detergent for prewash and soak before the start of the programme. Detergent compartment for washing phase.
  • Page 23 ENGLISH 12.5 Setting a programme 1. Turn the programme dial to select the desired washing programme. The related programme indicator comes The indicator of the Start/Pauza button flashes. The display shows the maximum declared load for the programme, the default temperature, the default spin speed, the washing phase indicators (when available) and an indicative The position B of the detergent...
  • Page 24 The PROSENSE adapts The ProSense detection is starts at the end of the carried out with complete countdown. washing programmes only Cancelling the delay start (no skipping phase selected). after the countdown has started 12.9 Programme phase To cancel the delay start: indicators 1.
  • Page 25 ENGLISH If the ProSense phase is When you activate the already carried out and the appliance again, the display water filling is already show the end of the last started, the new programme selected programme. Turn starts without repeating the the programme dial to set a ProSense phase.
  • Page 26: Hints And Tips

    • After 5 minutes from the end of the In any case, the appliance washing programme empties the water out Press the Zap./Vyp. button to activate automatically after the appliance again. approximately 18 hours. The display shows the end of the last set programme.
  • Page 27: Care And Cleaning

    ENGLISH Special stain removers are available. • the wash load to turn grey, Use the special stain remover that is • greasy clothes, applicable to the type of stain and fabric. • mould in the appliance. Excessive detergent may cause: 13.3 Detergent type and •...
  • Page 28 14.1 Periodic cleaning CAUTION! schedule Do not clean the metal surfaces with chlorine-based Periodic cleaning helps to extend the detergent. life of your appliance. After each cycle, keep the door and the 14.4 Descaling detergent dispenser slightly ajar to get air...
  • Page 29 ENGLISH 14.8 Cleaning the detergent dispenser To prevent possible deposits of dried detergent or clotted fabric softener and/or formation of mould in the detergent dispenser drawer, once in a while carry out the following cleaning procedure: 1. Open the drawer. Press the catch downwards as indicated in the Clean it when needed, using ammonia picture and pull it out.
  • Page 30 4. Insert the detergent drawer into the guide rails and close it. Run the rinsing programme without any clothes in the drum. 14.9 Cleaning the drain pump Regularly check the drain pump filter and make sure that it is clean.
  • Page 31 ENGLISH WARNING! Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. Make sure also that you tighten the filter correctly to prevent leakages.
  • Page 32 When you drain the water with the emergency drain procedure, you must activate the drain system again: 1. Put 2 litres of water in the main wash compartment of the detergent dispenser. 2. Start the programme to drain the water.
  • Page 33: Troubleshooting

    ENGLISH WARNING! Make sure that the temperature is higher than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. 15. TROUBLESHOOTING WARNING! Refer to Safety chapters. 15.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation.
  • Page 34 • Make sure that the door is properly closed. The appliance door is open or not closed correctly. • The programme was not finished properly or the appliance stopped too early. Switch the appliance off and on again. Internal fail. No com‐...
  • Page 35: Consumption Values

    ENGLISH Problem Possible solution • Make sure that a washing programme that ends with water in tub, has not been selected. • Make sure that the washing programme is finished. You cannot open the • Set the drain or the spin programme if there is water in the appliance door.
  • Page 36 The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
  • Page 37: Quick Guide

    ENGLISH 16.4 Common programmes These values are indicative only. Programme Litres h:mm °C Bavlna 2.25 4:05 52.00 1400 95°C Bavlna 1.65 3:50 52.00 1400 60°C Bavlna 0.35 2:50 52.00 1400 20°C Syntetika 0.75 2:10 35.00 1200 40°C Jemné prádlo 0.40 1:05 35.00 1200...
  • Page 38 2. Set the desired options by means of At the end of the programme, remove the the corresponding touch buttons. laundry. 3. To start the programme, touch the Start/Pauza button. 17.2 Cleaning the drain pump filter Clean the filter regularly and, especially,...
  • Page 39: Environmental Concerns

    ENGLISH 18. ENVIRONMENTAL CONCERNS appliances marked with the symbol Recycle materials with the symbol with the household waste. Return the Put the packaging in relevant containers product to your local recycling facility or to recycle it. Help protect the contact your municipal office. environment and human health by recycling waste of electrical and electronic appliances.
  • Page 40 www.aeg.com/shop...

Table of Contents