Table of Contents
Advertisement
Sending Name Cards (vCard) by Message
Send a contact record, or your entire contact list, as
attachment(s) to a message.
1. From the Home screen, press the Right Soft Key
(Contacts).
2. Press the Right Soft Key
Send Name Card.
3. At the SEND NAME CARD screen, highlight Message and
press
OK.
4. At the SEND WITH MESSAGE screen, highlight contacts
individually and press
Soft Key
(Mark All), then press the Left Soft Key
(Done).
5. Continue creating the new message, then press
Send. For information about creating and sending
messages, see "Messaging" on page 55.
47
(Options), then press
MARK, or press the Right
Adding PTT Contacts
You can create PTT contacts to make finding and contacting
them easier. A contact's mobile telephone number may be
their PTT number, if they are also subscribed to PTT service.
Note: PTT contact options are only available when PTT Mode
is On. For information about turning PTT Mode on or off
and using PTT Mode, see "Push to Talk (PTT) Functions"
on page 30.
1. From the Home screen, press
Contacts
New PTT Contact.
2. Press the Right Soft Key
Contact).
3. In the Name: field, enter a name for the contact using
the keypad.
4. Use the Directional Key
field to enter the contact's PTT number.
5. Use the Directional Key
field, then press the Left Soft Key
the PTT contact to a PTT group (optional).
6. When finished, press
MENU
(Options)
(New
to highlight the PTT Number
to highlight the PTT Group
(Add) to assign
SAVE.
Advertisement
Table of Contents
