Table of Contents
Advertisement
Operating instructions
*|
Press the POWER key to ON.
POWER
3 Play the source component.
• The selected source component is played automatically if it
is connected using a system control cord.
4 Adjust the volume.
Set the INPUT SELECTOR to select the source
to be played.
-► TUNER -*-
-► VIDEOI -«-
1 - ► TAPE 1
-► VIDE02
-►VIDEOI
-
-'
The source name characters appear on the dis¬
play in the cycle as shown above.
• Do not set the INPUT SELECTOR knob in the mid position
between click positions.
■To mute the sound temporarily
f—
-'
Press the MUTE key on the remote control unit.
CS] CS
, lue I
VOLUME CONTROL
0 Adjust the left and right volume balance.
' For the tone control, refer to "Graphic
(page 13).
Function of the LOUDNESS key
|
While dynamic sound can be experienced at high volume levels,
music may become flat with poor bass when the volume is set
low.
To compensate for this, p ess the LOUDNESS key when the VOL-
UME CONTROL is set to a low level. The bass will be boosted
making the sound richer ar d fuller.
%
0
'TUNER
* y
Lights up
i the VOLUME CONTROL knob on the front I
I^When the TAPE 2 key is set to ON, the source selected with the INPUT SELECTOR cannot be heard from the speakers. To listen to a sc
other than cassette deck 2, be sure to set the TAPE 2 key to OFF.
2. The source selected with the INPUT SELECTOR is backed up for a few days even when the power cord is unplugged. After this period
tuner is automatically selected when the power is supplied.
10
KC-991 (En)
Advertisement
Table of Contents
