Table of Contents
Advertisement
Available languages
Available languages
Connecting to a COMMON INTERFACE slot
(Your TV viewing Card Slot)
Turn the TV off to connect or disconnect a CI card or CI card adapter.
✎
Attaching the CI Card Adapter
Attach the adapter as shown side.
To install the CI CARD Adapter, please remove the
✎
sticker attached to the TV.
To connect the CI CARD Adapter, follow these steps.
We recommend attaching the adapter before installing
✎
the wall mount, or inserting the "CI or CI+ CARD".
1. Insert the CI CARD Adapter into the two holes on the
product 1.
Please find two holes on the rear of the TV, beside the
✎
2. Connect the CI CARD Adapter into the
3. Insert the "CI or CI+ CARD".
We recommend that you insert the CI card before you mount the TV on a wall. It may be
difficult to insert after mounting. It is difficult to attach the module if you insert the card
before attaching.
Using the "CI or CI+ CARD"
To watch paid channels, the "CI or CI+ CARD" must be inserted.
• If you don't insert the "CI or CI+ CARD", some channels will
display the message "Scrambled Signal".
• The pairing information containing a telephone number, the "CI or
CI+ CARD" ID the Host ID and other information will be displayed
in about 2~3 minutes. If an error message is displayed, please
contact your service provider.
• When the configuration of channel information has finished, the
message "Updating Completed" is displayed, indicating the
channel list is updated.
NOTE
✎
You must obtain a "CI or CI+ CARD" from a local cable service provider.
•
When removing the "CI or CI+ CARD", carefully pull it out with your hands since dropping the "CI or CI+ CARD"
•
may cause damage to it.
Insert the "CI or CI+ CARD" in the direction marked on the card.
•
The location of the COMMON INTERFACE slot may be different depending on the model.
•
"CI or CI+ CARD" is not supported in some countries and regions; check with your authorized dealer.
•
If you have any problems, please contact a service provider.
•
Insert the "CI or CI+ CARD" that supports the current aerial settings. The screen will be distorted or will not be seen.
•
COMMON INTERFACE
COMMON INTERFACE
English - 8
TV Rear
port.
port on the product 2.
Advertisement
Table of Contents
