Table of Contents
Advertisement
Chapter 2: Basic Features
TV Terminals
Note: The pictures are only for reference.
Back View
3
4
6
AVIN
©
2
3
5
1. LAN
Network port.
~•
@J---------[@
d
Router
2. DIGITAL AUDIO OUT
connect an optical cable to output the TV's digital audio
signal to a compatible audio receiver.
Digital audio device
3. HDMI IN
Receive HDMI input signal from the connected HDMI
device.
Recorder/Player
or
~
Gamoorder
9
Note:
1) ff the external device has a DVI output only, use a DVI
to HDMI adapter cable to connect to the HDMI terminal.
2) For the audio receiver control Sound Out, firstly you
must have a device which supports HDMI Sound Out,
then connect it to the HDMl1 port. When the "Sound Out"
setting is enabled on your
Tl/,
the TV's speakers will
mute automatically and the audio will be outputted on
your sound device system.
4. USB
Connect USB devices to the TV.
IO'l
'
.
'
'
I
'
Note: Never remove the USB device or turn off the TV
while using the USB device.
5. ANTENNA IN
Connect a coaxial cable to receive signal from the
antenna or cable.
0
Antenna or cable TV
Note:
1) Do not place the RF cable under the
TV.
2) To obtain the optimum quality of picture and sound,
an aerial, the correct cable (750 coaxial) and the
correct terminal are required.
3)
If
a community antenna system is used, you may
require the correct connection cable and plug between
the wall aerial socket and the
TV.
4) Your local Television Service Center or dealer may be
able to assist you in obtaining the correct aerial system
for your particular area and the accessories required.
5) Any matters regarding aerial installation, upgrading of
existing systems or accessories required, and the costs
incurred, are the responsibility of you, the customer.
Advertisement
Table of Contents
