STEREO DOUBLE CASSETTE DECK RECEIVER
Gyevele:
0
RX-731(S) 7RX-730(S) 7
;
RX-1320(S)
STEREC TURNTABLE
PLP 2OSRLY Pie 22
PE 2252
The model PL-223Z is not sold in the U.S.A.
The models PL-203AZ and PL-223AZ are not sold in Canada.
Thank you for buying this Pioneer product.
Please
read through
these
operating
instructions
so you
will
know
how to operate your mode!
properly. After you have fi-
nished reading the instructions, put them away in a safe place for
future reference.
in some countries or regions, the shape of the power plug and
power
outlet
may
sometimes
differ from
that shown
in the
explanatory drawings. However, the method of connecting and
operating the unit is the same.
WARNING:
To prevent FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel.
Please write this serial number on your enclosed warranty card
and keep it in a secure area. This is for your security.
[For Canadian models]
CAUTION: To prevent ELECTRIC SHOCK DO NOT USE
THIS
(POLARIZED)PLUG
WITH
AN
EXTENSION
CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION:
pour
pREvENIR
LES
CHOCS
ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE
AVEC UN PROLONGATEUR UNE PRISE DE COURANT OU UNE
AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT
ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A
DECOUVERT.
TWO VOLTAGE SELECTOR SWITCHES
Only muiti-voltage models are provided with these switches.
U. S. and Canadian models are not provided with these switches.
Mains voltages in Saudi Arabia are 127V and 220V only.
Never use this model with 110V setting in Saudi Arabia.
CHECKING ACCESSORY
ITEMS ......0....0...0..0-.-.
BEFORE OPERATION
............0....00000000
20008
ANTENNA
CONNECTIONS
...
CONNECTIONS
..........
REMOTE CONTROL
UNIT FACILITIES - :
TURNTABLE
FACILITIES... 2.2.2.2...
CONTENTS
PRELIMINARY OPERATIONS........-..-------
20005 11
The line voltage selector switches are on the rear panel. Before
your model is shipped from the factory, these switches are set to
the power requirements
of the destination.
Check they are to
properly before plugging the power cord into the household wail
socket. If the voltage is not properly set or if you move to an area
where
the
voltage
requirements
differ,
adjust
the
selector
switches as follows.
1. Use a medium-size screwdriver.
2. First, insert a screwdriver
into the groove
of the voltage
selector at the top, and adjust so that tip of the groove points
to the voltage value of your area.
3. Next, insert the screwdriver into the groove of the voltage
selector at the bottom and adjust until the voltage is the same
as at the top.
Both switches must
be in the same switch
setting.
rerawd Lazo-24er)
CHANNEL STEP SWITCH
Only muiti-voltage models are provided with this switch.
U. S. and Canadian models are not provided with this switch.
(This switch is on the rear panel.)
The unit has been factory preset to the channel allocation for the
area in which
it is to be sold, if the value is set incorrectly,
frequency display may stop at the wrong frequency, or sound
may be distorted, resulting in an inability to reproduce reception
signals at their proper sound quality.
For this reason, be sure to confirm that the valueis set correctry
before first using the unit.
[100 kHz/10 kHz] position:
Set to this position for areas with FM reception step of 100 kHz,
AM 10 kHz.
[50 kHz/9 kHz] position:
Set to this position for areas with FM reception step of 50 kHz,
AM 9 kHz.
When unsure about the channel allocation for your area, consult
your dealer for correct information.
CHANNEL STEP
FM/AM
SETTING THE CLOCK
12
BASIC OPERATIONS
12
CASSETTE TAPE RELAY PLAYBACK
. -
a S
satel
.. 14
COPYING: TAPES «4 cot
cea At a 3 BS path
td ebay
3 14
MAINTENANCE...
0s co 5 ce
ee
ee
bee
ee 16
TROUBLESHOOTING
......
'
17
SPECIFICATIONS ............---
:
ae
eae
HOW TO HANDLE CASSETTE TAPES.................
20
YQ PIONEER'
The future of sound and vision.