Download Print this page

Removal And Replacement Procedures Preliminary Requirements; Tools Required; Service Considerations; Plastic Parts - HP ENVY x360 Maintenance And Service Manual

4 inch 2-in-1 laptop pc

Hide thumbs Also See for ENVY x360:

Maintenance and service manual (111 pages)

User manual (76 pages)

Maintenance and service manual (90 pages)

Table Of Contents

Table of Contents

Removal and replacement procedures

preliminary requirements

Use this information to properly prepare to disassemble and reassemble the computer.

Tools required

You need the following tools to complete the removal and replacement procedures:

●

Tweezers

●

Nonconductive, nonmarking pry tool

●

Magnetic Phillips P1 screwdriver

Service considerations

The following sections include some of the considerations that you must keep in mind during

disassembly and assembly procedures.

NOTE:

As you remove each subassembly from the computer, place the subassembly (and all

accompanying screws) away from the work area to prevent damage.

Plastic parts

Using excessive force during disassembly and reassembly can damage plastic parts.

Cables and connectors

Handle cables with extreme care to avoid damage.

IMPORTANT:

during the reassembly process. Improper cable placement can damage the computer.

Apply only the tension required to unseat or seat the cables during removal and insertion. Handle cables

by the connector whenever possible. In all cases, avoid bending, twisting, or tearing cables. Be sure that

cables are routed so that they cannot be caught or snagged as you remove or replace parts. Handle flex

cables with extreme care; these cables tear easily.

Drive handling

Note the following guidelines when handling drives.

When servicing the computer, be sure that cables are placed in their proper locations