Advertisement
Quick Links
FM/AM DIGITAL SYNTHESIZER TUNER
DIV T2290.
Operating
eka
igi les dleyaes
Qeroneer -.
aes
Illustration shows model F-229.
({multi-voltage model}
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how
to operate your unit properly. After you have finished reading the
instructions, keep the manual in a safe place for future reference. In
some countries or regions, the shape of the power plug and power outlet
may sometimes differ from that shown in the drawings. However, the
method of connecting and operating the unit is the same.
WARNING:
to prevent FiRE OR SHOCK HAZARD. DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel. Please
write this serial number on your enclosed warranty card and keep it in
a secure area. This is for your security.
[For Canadian model]
CAUTION: to prevent ELECTRIC SHOCK DO NOT USE
THIS (POLARIZED) PLUG WITH AN EXTENSION CORD. RECEPTACLE
OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED
TO PREVENT BLADE EXPOSURE.
ATTENTION: pour prevenin tes CHOCS ELECTRIQUES
NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN
PROLONGATEUR UNE PRISE DE COURANT OU UNE AUTRE SORTIE
DE COURANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A
FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT.
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage
models
are provided with this switch.
U.S.,
Canadian, European, U.K., and Australian models are not provided
with this switch.
Mains voltage in Saudi Arabia are 127V and 220V only. Never use
this model with 110V setting in Saudi Arabia.
The line voltage selector switch is on the rear panel. Before your model
is shipped from the factory, this switch is set to the power requirernents
of the destination. Check that it is set properly before plugging the power
cord into the AC wall socket. If the voltage is not propay
set or if you
move
to an area where the voltage requirements differ,
adjust the
selector switch as follows.
1. Use a medium-size screwdriver.
2. Insert the screwdriver into the groove on the voltage selector, and
adjust so that the tip of the arrow points to the voltage value of your
area.
VOLTAGE SELECTOR
reo v—e7V
nov
zecy
anv
:
:
Medium-size
screwdriver
@) PIONEER
The Art of Entertainment
Advertisement
