Advertisement
Quick Links
Operating
Instructions
e@
Side
panels
not
supplied
with
Europe and U.K. models.
@
Photograph
shows
BLACK
finished models.
Thank you for buying this Pioneer product.
Please read these operating instructions thoroughly, so you will know
how to operate your model properly. After you have finished reading
the instructions, put them away in a safe place for future reference.
For the sake of convenience, these operating instructions are based
on the model HEM, and they can be used for the HB, HP, KU, KC, D
and D/G models.
The differences between the models are given below.
HEM model:
.
For Europe excluding U.K. ('HEM' stamped on packing case): Power
line voltage is AC 220 volts. -
HB model:
For U.K. ('HB' stamped on packing case): Power line voltage is AC
240 volts.
HP model:
For Australia ('HP' stamped on packing case): Power line voltage is
AC 240 volts.
KU and KC models:
For'U.S.A.
and Canada ('KU' or 'KC' stamped on packing case):
Power line voltage is AC 120 volts.
D and D/G models:
For destinations excluding above ('D' or 'D/G' stamped on packing
case): A 3-point (120 V/220 V/240 V) voltage selector switch is pro-
vided.
NOTE:
Depending upon the model, the design of the power plug and the
power outlet differs.
*
FOATUPES Saceiccavetciciexccdudcudsteys cveseenstiguouedecsece'
About the Accessory Wood-Grain Side Panels.........
Rear Panel Facilities and Connections ...............
Front Panel Facilities
:
Recording
AUTO BLE Tuning System
Playback
;
CONTENTS
STEREO CASSETTE TAPE DECK
T-"ASX
This product is manufactured
to
comply
with
the
radio
inter-
ference
requirements
of
EEC
Directive
''76/889/EEC.
&
82/
499/EEC".
IMPORTANT NOTICE (For KU and KC models)
The serial number for this equipment is located on the rear panel.
Please write this serial number on your enclosed warranty card and
keep in a secure place. This is for your security.
WARNING:
TO PREVENT
FIRE OR
SHOCK HAZARD, DO NOT EXPOSE
THIS
APPLIANCE
TO
RAIN
OR
MOISTURE.
.
LINE VOLTAGE SELECTION
Before your model
is shipped from the factory, the switch is set
to the power requirements of the destination; nevertheless, you
should check that it is set properly before plugging the power cord
into the AC outlet.
1. Disconnect the power cord.
2. Provide yourself with a medium size screwdriver.
3. Insert the screwdriver
into the groove on the voltage selector
and adjust the voltage value of your area.
Volts
Screwdriver
HEM
(for Europe excluding
U.K.), HB
(for U.K.), HP (for
Australia), KU
(for U.S.A.) and KC (for Canada) models are
not provided with a LINE
VOLTAGE
SELECTOR
switch.
Using the Accessory Functions ..........sserereeeee
Recording and Playback Using
the Audio Timer
Maintenance
Troubleshooting
Cassette Tapes
Specifications
@) PIONEER'
Advertisement
