Epson WF-C5790 Service Manual page 398

Color inkjet printer

Hide thumbs Also See for WF-C5790:

Table of Contents

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a

1. Remove the two screws (S6: ), and remove the Plate.

When installing the Ink Supply Tube to the RIPS Unit, make sure to tighten the

screws using a torque driver with the specified torque.

Screw tightening torque: 0.59±0.01Nm

Disassembly/assembly

C.B.SCREW-2.6X18-F.ZN-3C

Disassembly/Reassembly Procedures

In the following steps, ink may spill from the Ink Supply Tube. Prepare waste cloths

or similar in advance.

1. Remove the two screws (S8: ), and remove the Ink Supply Tube from the Printhead.

Make sure the plate was attached.

Ink Supply Tube

Ink Supply Tube

C.B.EP-TITE SCREW,2.6X17(B=14),F/ZN-3C

Confidential

Chapters

Table of Contents