Acer AL1917 Service Manual page 25

Hide thumbs Also See for AL1917:

Table of Contents

i LOG01

How To Optimiz > The DOS-Mode Plug And Play Plug & Play DDC2B Feature

quipped with VESA DDC2B capabilities according to the VESA DDC STANDARD,

its display capabilities.

The DDC2B is a bi-directional data channel based on the l2C protocol. The host can request EDID information over

the DDC2B channel.

This monitor will appear to be non-functional if there is no video input signal. In order for this monitor to

operate properly, there must be a video input signal.

This monitor meets the Green monitor standards as set by the Video Electronics Standards Association (VESA)

and/or the United States Environmental Protection Agency (EPA) and The Swedish Confederation Employees

(NUTEK). This feature is designed to conserve electrical energy by reducing power consumption when there is no

video-input signal present. When there is no video input signals this monitor, following a time-out period, will

automatically switch to an OFF mode. This reduces the monitor's internal power supply consumption. After the video

input signal is restored, full power is restored and the display is automatically redrawn. The appearance is similar to

Using The Right Power Cord

The accessory power cord for the Northern American region is the wallet plug with NEMA 5-15 style and is UL listed

and CSA labeled. The voltage rating for the power cord shall be 125 volts AC.

Supplied with units intended for connection to power outlet of personal computer: Please use a cord set consisting of

a minimum No. 18 AWG, type SJT or SVT three conductors flexible cord. One end terminates with a grounding type

connector body, rated 10A, 250V, having standard CEE-22 female configuration.

Please note that power supply cord needs to use VDE 0602, 0625, 0821 approval power cord in European counties.

Table of Contents