Description Of Options - Electrolux 7 Series Service Manual
Hide thumbs
Also See for 7 Series:
- Instruction book (96 pages) ,
- Service manual (84 pages) ,
- Service manual (76 pages)
Table of Contents
Advertisement
9.3
Description of options
•
Rinse hold
→ During the cycle, performs the rinses and the intermediate spins.
→ Stops the appliance with water in the tub before the final spin cycle.
→ To drain the water, simply press the START/PAUSE button to perform the drain phase and the spin cycle.
•
Pre-wash
→ Adds a pre-wash phase at the start of the cycle with water heating to 30°C (or cold, if selected).
→ In COTTONS and SYNTHETICS cycles, performs a short spin before passing on to the washing phase.
→ This option cannot be selected for WOOL and HAND WASH cycles.
•
Prewash
→ Adds a pre-wash phase with heating to 30°C (or cold, if selected) plus 30' hold with HAND WASH movement.
→ Complete Cycle
•
Stains
→ Adds a 5-minute motor movement phase after heating to 40°C.
→ Water flow to the pre-wash/stains compartment to introduce the special stain-removal product
→ This option cannot be selected for WOOL and HAND WASH cycles.
•
Super rinse (SERIES 7)
→ Adds two rinses to the COTTONS cycle, one to the SYNTHETICS - DELICATES cycles.
→ Eliminates the spins at the end of the washing.
•
Super rinse (SERIES 8/9 key combination).
→ Adds two rinses to the COTTONS cycles, adds one rinse to the SYNTHETICS - DELICATES cycle
→ Eliminates the spins at the end of the washing.
•
EXTRA rinse (SERIES 8/9)
→ Adds up to five rinses in the COTTONS - SYNTHETICS - DELICATES cycles
→ When the rinses are five or more, it eliminates the spins at the end of the washing.
Maximum of 8 rinses in total.
Appliances which do not envisage the SUPER RINSE option combined with a button can enable it through a
key combination.
Series 7
During the selecting phase, press the two buttons shown in the figure simultaneously for a few seconds until
the related icon lights up. This option also remains enabled for subsequent cycles. To disable it, repeat the
same procedure until the related icon is turned off.
•
No spin
→ It eliminates all the spin phases.
→ It adds three rinses to the COTTONS cycle and one to the SYNTHETICS cycle.
•
Daily
→ Modifies the structure of the COTTONS - SYNTHETICS - DELICATES cycles to obtain good washing
performance in a short space of time.
2010 dmm
ENABLING/DISABLING SUPER RINSE KEY COMBINATION
Series 8
38/96
Series 9
599 73 68-54
Advertisement
Table of Contents
