Beko VRT 51225 VB; VRT 50225 VB; VRT 50121 VR - Cordless Stick Vacuum Cleaner Manual

Also See for VRT 51225 VB:

User manual (141 pages)

User manual (45 pages)

User manual (143 pages)

Table of Contents

Contents

1 Symbols and their meanings
2 Overview
3 Installation
4 Operation
- 4.1 Usage
- 4.2 Accessories
5 Cleaning and maintenance
6 Important safety and environmental instructions
- 6.1 General safety
- 6.2 What to do for energy saving
7 Documents / Resources
- 7.1 References
- 7.2 Download manual

Beko VRT 51225 VB; VRT 50225 VB; VRT 50121 VR - Cordless Stick Vacuum Cleaner Manual

Symbols and their meanings

These symbols are used throughout this guide:

	Important information and useful hints about usage.
	Warnings against dangerous situations concerning the security of life and property.
	Electric shock protection rating

Overview

Controls and components

Charge indicator LED lights
Power Adjustment button
On/off button
Emptying dust container ring
Dust container
Tube release button
Appliance release button
Charging Dock
Accessory attachment parts
Tube
Brush release button
Electric turbo brush
Charging adaptor
Mini turbo brush (VRT 51225 VB)
Dust brush
Crevice attachment
Screw (4 pcs)
Dowel (4 pcs)

Technical data

	VRT 51225 VB - VRT 50225 VB	VRT 50121 VR
Nominal input power	150 W	110 W
Input	100 - 240 V~ 50-60 Hz 0,5 A
Output	32 V 0.45 A	27 V 0.5 A
Charging time	4-6 hours
Runtime at max. power	17 mins
Runtime at min. power	45 mins

The rights to make technical and design changes are reserved.

The values provided with the appliance or its accompanying documents are laboratory readings in accordance with the respective standards. These values may differ depending on the use and ambient conditions.

External Power Supply Parameter

	VRT 51225 VB - VRT 50225 VB	VRT 50121 VR
Manufacturer:	Guangdong Huachuangxing Power Supply Co.,Ltd
Model ID:	HCX1501-3200450E	HCX1501-2700500E
Input Voltage:	100-240V~
Input Frequency:	50-60Hz
Input Current:	0.5A
Output Voltage	32.0V	27.0V
Output Current	0.45A	0.5A
Output Power:	14.4W	13.5W
Average active efficiency:	85.5%	84.39%
Efficiency at low load (10%):	83.33%	70.65%
Power consumption under no load:	0.041W	0.071W

Installation

Intended use

This appliance is intended for household use and it is not suitable for industrial use.

Installation of the charging dock

Position the charging dock (8) at a height of 112- 114 cm from the ground.

Fix four dowels (18) on the wall
Place four screws (17) into their locations on the charging dock (8) and mount on the dowels on the wall.

Plug the charging adaptor (13) to the socket.

Installation of the body and the brush

Push the tube (10) in the direction of arrow towards the body by pushing on the tube release button (6).

Press the electric turbo brush release button (11) on the electric turbo brush (12) and push it in the direction of arrow towards the tube.

Attach crevice attachment (16) and dust brush (15) to the charging dock (8).

Operation

Place the appliance on the charging dock (8).
After placing dust container (5) on the charging dock (8), push the appliance towards the charging dock.

Plug the charging adaptor (13) to the socket.

Flashing of the charge indicator LEDs (1) in white colour indicates that the appliance is being charged.

When all levels of the charge indicator LEDs (1) are illuminated, this indicates that the charging of the appliance is completed.

	It takes up to 4 to 6 hours to charge the appliance completely. The appliance shall not be operated while charging.
	If the appliance is placed on the charging dock (8) while it is being operated, it shall be stopped automatically.

Usage

Push the appliance release button (7) on the charging dock (8) downward and pull the appliance towards yourself at the same time.
Remove the appliance from the charging dock (8).

Press the on/off button (3) to operate the appliance. The appliance starts operating with the minimum power when the on/off button is pressed.

To switch to the maximum power when operating in the minimum power, push the power adjustment button (2). To switch to the minimum power when operating in the maximum power, push the power adjustment button (2) again.

information The appliance may be placed for charging before the complete discharging of the battery. The appliance may be kept continuously as charging on the charging dock (8) until the next operation.

Pay attention to the power indicator LEDs (1) during operation. These indicators gradually turn off as the charge level is reduced, and when all indicators are turned off and only one indicator illuminates in red, then the charge of the appliance is about to run out. The appliance stops operating automatically after a short while when the red LED illuminates.

This appliance is suitable for use on carpets and hard floors.

Accessories

Crevice (16): Suitable for vacuuming the rear of the furnitures, hard to reach areas and narrow areas.

Dust brush (15): Suitable for vacuuming curtains, waxed furniture and delicate and fragile objects.

Mini turbo brush (14): Suitable for vacuuming floorings, stair steps, car interiors, sofas and seat, etc. It is also used for vacuuming pet hair on such surfaces.

Cleaning and maintenance

Turn off and unplug the appliance before cleaning.

Never use gasoline, solvent, abrasive cleaners, metal objects or hard brushes to clean the appliance.

Deformation may occur on the filters within time as a result of usage. It shall be replaced with a new one to prevent loss of performance. Contact with the customer services to buy a new one.

Cleaning the Dust container and Filters

		WARNING: Do not wash the filters.
	We recommend you to clean the dustbin (5) after each operation.

Wipe the surface of the body with a wet cloth.

Pull the emptying dust container ring (4) to the last point. Dust container lid will be opened. Empty all the dust it contains.

For a detailed cleaning of filters, remove the dust container by turning it clockwise while pulling dust container ring (4) lightly.

Pull EPA E10 and plastic filter holding from the EPA E10 handle.

Seperate EPA E10 and plastic filter from each other.

Remove the dust on the EPA E10 filter by tapping it on a hard surface such as a waste bin or by using a brush.

Remove the dust on the plastic filter by tapping it on a hard surface such as a waste bin or by using a brush.

Attach EPA E10 filter to the plastic filter back.

Attach plastic filter on the dustbin ring (5).

Fix the connector of dustbin to the holes on the body, then fix the dustbin by turning counterclockwise until you hear the click sound.

Cleaning of the brush

Do not wash the turbo brush (8) and the main roller.

Press on the roller release button.

Remove the dust on it by tapping it lightly to a hard surface or remove the dust with a brush. If any hair, etc. is tangled, remove it by cutting it off.

Fix the roller back to its place by pushing.

Storage

If you do not intend to use the appliance for a long time, store it carefully.
Unplug the appliance.
Ensure that the appliance is kept out of reach of children.
If you shall not be using the battery for a long period of time, please keep it in a cool and dry place at half charged condition. Do not charge or discharge completely.
Store the battery on a non-conducting material, and do not allow the battery to contact metal directly. This shall damage the battery.

Transport and shipping

During transport and shipping, carry the appliance with its original packaging. The packaging of the appliance will protect the appliance against physical damage.
Do not put heavy objects on the appliance or its packaging. Otherwise the appliance may be damaged.
If the appliance is dropped, the appliance may not operate or permanent damage may occur.

Product Guarantee
12 months breakdown and repair guarantee
Guarantor: Beko plc, 1 Greenhill Crescent, Watford, Hertfordshire. WD18 8UF

Please call our UK based Customer Service department if you need help or advice from us:
United Kingdom and Northern Ireland: 0333 207 9710
Republic of Ireland: 01 862 3411

You can also contact us through our website: www.beko.co.uk

Important safety and environmental instructions

This section contains safety instructions to prevent hazards that can result in injury or property damage. Any warranty is void if these instructions are not followed.

General safety

This appliance complies with international safety standards.
This device can be used by children over 8 years of age, people with physical, sensory or mental challenges or people with lack of experience or knowledge; as long as control is ensured or information is provided regarding the hazards. Children must not play with the appliance. Cleaning and user maintenance shall not be carried out by unattended children.
Do not use the appliance if the power cord or the appliance is damaged. Contact authorized service.
Your mains power supply shall match the information shown on the rating plate label of the appliance.

Do not use the appliance with an extension cord.
To prevent damage to the power cord, prevent it from being pinched, crimped or rubbed against sharp edges.
Do not touch the plug of the appliance with damp or wet hands while the appliance is plugged in.
Do not pull on the cord while unplugging the appliance.
Do not vacuum flammable materials and ensure that the cigarette ashes are cooled down before vacuuming them.
Do not vacuum water and other fluids.
Protect the appliance against precipitation, humidity and heat sources.
Do not use the appliance in or near explosive or flammable environments and substances.
Unplug the appliance before cleaning and maintenance.
Do not immerse the appliance or its power cord in water for cleaning.

Do not disassemble the appliance.
Use only original parts or parts recommended by the manufacturer.
To prevent blockage of the filter or damage to the motor, do not vacuum cement, plaster or fragments of compressed paper.
Use the appliance with the adapter delivered with the appliance only.
Do not use the appliance without filters, it may get damaged.
If you keep the packaging materials, keep them out of the reach of children.
This appliance is not intended to be used by persons, including children, with physical, sensory and mental disabilities or those who have not adequate experience and knowledge regarding its use, unless they are under the supervision of a person responsible for their safety or they are informed about the operation of the appliance.
Children shall be supervised to prevent them from playing with the appliance.

Unplug the adaptor and remove the battery pack before any cleaning or maintenance procedure.
To avoid any risk of hazard, a damaged adaptor shall be replaced by the manufacturer, the authorized representative of the manufacturer or a similarly qualified technician.
Keep your fingers, hair and loose clothes away from moving parts or clearances while vacuuming.
Batteries shall be removed from the appliance before discarding the appliance.
Disconnect the appliance from power supply before removing the battery.
Please discard used batteries in accordance with local laws and regulations.
The batteries included in this appliance may only be replaced with qualified persons.
Appliance is not intended to be operated for commercial purposes. This appliance is not designed for commercial use, it is intended for home use and in applications as follows:

In the staff kitchens of the stores, offices and other working environments
In farm houses;
By customers in hotels, motels or other accommodation facilities
In hostels or similar environments.

Use the HCX1501- 3200450E VB-VRT50225 VB), HCX1501- 2700500E (VRT 50121 VR) removable supply unit delivered with the appliance to charge to the battery.

This appliance shall not be operated by children and people with limited physical, sensory and cognitive skills or people with lack of experience and knowledge unless they are under supervision or they are provided with the relevant instructions.
Children shall be supervised to prevent them from playing with the appliance.

What to do for energy saving

When using your appliance, adjust the speed settings according to the surface, in order to save energy.
Normally, lower speeds are used when cleaning hard surfaces, curtains and sofas, while high speeds are used in for cleaning carpets.

www.beko.co.uk