Table of Contents
Advertisement
Media-card reader
Removing the media-card reader
Prerequisites
1. Follow the procedure in
2. Remove the
back
cover.
3. Remove the
bottom
cover.
4. Remove the stand.
5. Remove the
system-board
About this task
The following image indicates the location of the media-card reader and provides a visual representation of the removal
procedure.
Steps
1. Remove the screw (M2x3) that secure the media-card reader to the display-assembly base.
2. Open the latch and disconnect the media-card reader cable from the system board.
3. Remove the media-card reader from media-card reader slot.
Installing the media-card reader
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the media-card reader and provides a visual representation of the installation
procedure.
32
Removing and installing components
Before working inside your
shield.
computer.
Advertisement
Table of Contents
