M&K Sound. That means even clearer, quiet whispers to larger explosions - and everything in-between - but at a greater distance from the screen. The M&K Sound IW500 backbox in-wall loudspeaker system is designed for easy installation. You are just a few steps away from enjoying the acclaimed M&K Sound.
However, if you are not using a Fig. A projector with an acoustically transparent screen, the IW500 is certified to be used horizontally as a center channel, allowing more installation flexibility (such as when using large-format flat panel TVs or displays).
Speaker Installation The IW500 in-wall loudspeaker can be mounted into a masonry, dry wall or a purpose-built “baffle wall”. A baffle wall is usually designed by an architect or specified by a commercial installer to accommodate loudspeakers behind an acoustically transpar- ent projection screen.
Page 6
For ease of installation, it is best to turn the torx screw ¼ turn counterclockwise before turning clockwise to tighten. This disengages the dog from its rest position Dogs 7. Check the IW500 for perfect alignment 8. Mount and align the optional magnetic grille and the installation is complete Important Practical Information When using an electric tool for screw mounting, adjust the tension function to prevent the dog screws from being over-tightened.
Speaker input push terminal Note All M&K Sound loudspeakers are designed to be used with the company’s acclaimed subwoofers. The THX Certified Dominus IW500 partners ideally with M&K Sound’s THX Certified Dominus X15+ powered subwoofer in large home cinema rooms.